Skip to contentSkip to conversation

please help with pppoe

DISCUSSION lee Leahu 3 participants 3 messages May 15, 2002 – May 16, 2002

lore
Share & tools
lore

lee Leahu

author
#0 lore raw

hello,

by now i am very frusterated because i'm not sure whats going on and i don't have any clue on whats required to fix this.

i'm trying to get pppoe to work from linux. i already have it working from windows nt and windows xp.

i am running suse 7.3 professional.
my kernel is 2.4.16-4gb (k_deflt made by suse)

i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1

my /etc/ppp/options file goes like this:

hide-password
lock
local
nocrtscts
sync
noauth
noaccomp
mtu 1484
mru 1484
noipdefault
noipx
novj
novjccomp
debug
username "(username)@covad.net"

my /etc/ppp/pap-secret is like this

"(username)@covad.net" * "(password)"

i have been trying to get this pppoe to work by running:
pppoe -I eth1
pppoe -D -d 9 -I eth1
adsl-start

please help

lee leahu
[email protected]

#1 lore raw
Quoted 6 lines · lee Leahu

hello,

by now i am very frusterated because i'm not sure whats going on and i don't have any clue on whats required to fix this.

i'm trying to get pppoe to work from linux. i already have it working from windows nt and windows xp.

Quoted 9 lines

i am running suse 7.3 professional.
my kernel is 2.4.16-4gb (k_deflt made by suse)

i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1

I'm using the rp pppoe patch and 2.4.19-pre6. I setup my options/user file and ran 'pppd eth0', worked perfectly the first time.

# cat /etc/ppp/options         plugin rp-pppoe.so
name <username>
nodefaultroute
# cat /etc/ppp/pap-secrets <username> * <password>
# pppd --version
Warning: plugin rp-pppoe.so has no version information
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2b1
pppd version 2.4.2b1

I don't use the DSL connection as my default route thus the 'nodefaultroute' statement.

It works very well save for frequent but seemingly innocuous OOPses.

-d

#2 lore raw
In reply to lee Leahu
Quoted 5 lines · lee Leahu

i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1

^^^^^^^^^^^^^^^

You don't need this, if you want to use kernel-pppoe. This is another userspace-driver.

Quoted 11 lines

my /etc/ppp/options file goes like this:

hide-password
lock
local
nocrtscts
sync
noauth
noaccomp
mtu 1484
mru 1484

Change this to 1492. You also have to add the PPPoE-Modul. You'll find a working config-file at [1]. Unfortunately with german comments, have a look in "man pppd" to figure out what all the options stand for. It could also be useful to activate "debug" and "kdebug 4" in the options-file. So you'll get a lot of interesting infos in /var/log/messages

Quoted 6 lines

noipdefault
noipx
novj
novjccomp
debug
username "(username)@covad.net"

^^^^^^^^^^
This have to be: user "(username)@covad.net" (see [1]).

Quoted 3 lines

i have been trying to get this pppoe to work by running:
pppoe -I eth1
pppoe -D -d 9 -I eth1

These are for Kernel-PPPoE with Kernel 2.2.x! With the options-file above you only have to use "pppd eth1".

Quoted 1 line

adsl-start

This is for rp-pppoe, not for Kernel-PPPoE!

Quoted 1 line

please help

Maybe you should post to the ppp-Mailinglist (linux-ppp at vger.kernel.org).

Bye,
Michael

In-Reply-To:
1. http://www.adsl4linux.de/pub/config/pppoed24x/tonline_tdsl/options

Signature · 4 lines
ADSL4Linux:                http://www.adsl4linux.de
Erste Hilfe im Webforum:   http://www.adsl4linux.de/forum
ADSL4Linux-Mailinglisten:  http://www.adsl4linux.de/majordomo
Lob/Kritik/Sonstiges:      [email protected]