Skip to contentSkip to conversation

How to install two linux OSes on the same PC

DISCUSSION Narsimha Reddy CHALLA 3 participants 4 messages Feb 5, 2003 – Feb 7, 2003

lore
Share & tools
lore
#0 lore raw

Hi All,

I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,
/dev/hda8 ( /tmp),... /dev/hda11 etc.

But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.

Please give your suggestions on how to resolve this problem.

At present my partition table with single installation (rh 7.2) is,

[root@creddy-pc root]# fdisk -l

Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1       261   2096451    6  FAT16
/dev/hda2           262      2434  17454622+   5  Extended
/dev/hda5           262       522   2096451    6  FAT16
/dev/hda6           523       653   1052226   83  Linux
/dev/hda7           654      1175   4192933+  83  Linux
/dev/hda8          1176      1371   1574338+  83  Linux
/dev/hda9          1372      1436    522081   82  Linux swap
/dev/hda10         1437      1501    522081   83  Linux
/dev/hda11         1502      1566    522081   83  Linux

[root@creddy-pc root]#

TIA,
- Narsimha Reddy CH
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 18 lines · Narsimha Reddy CHALLA

Hi All,

I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,
/dev/hda8 ( /tmp),... /dev/hda11 etc.

But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.

Quoted 1 line

Please give your suggestions on how to resolve this problem.

Edit properly in that menu where it ask's for partition info for installing.

I have Redhat 7.2, slackware gentoo and peanut all on one disk.

Slackware was installed first, then redhat.

Quoted 24 lines

At present my partition table with single installation (rh 7.2) is,

[root@creddy-pc root]# fdisk -l

Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1       261   2096451    6  FAT16
/dev/hda2           262      2434  17454622+   5  Extended
/dev/hda5           262       522   2096451    6  FAT16
/dev/hda6           523       653   1052226   83  Linux
/dev/hda7           654      1175   4192933+  83  Linux
/dev/hda8          1176      1371   1574338+  83  Linux
/dev/hda9          1372      1436    522081   82  Linux swap
/dev/hda10         1437      1501    522081   83  Linux
/dev/hda11         1502      1566    522081   83  Linux

[root@creddy-pc root]#

TIA,
- Narsimha Reddy CH

Signature · 9 lines
Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Narsimha Reddy CHALLA
Quoted 38 lines · Narsimha Reddy CHALLA

Hi All,

I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,
/dev/hda8 ( /tmp),... /dev/hda11 etc.

But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.

Please give your suggestions on how to resolve this problem.

At present my partition table with single installation (rh 7.2) is,

[root@creddy-pc root]# fdisk -l

Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1       261   2096451    6  FAT16
/dev/hda2           262      2434  17454622+   5  Extended
/dev/hda5           262       522   2096451    6  FAT16
/dev/hda6           523       653   1052226   83  Linux
/dev/hda7           654      1175   4192933+  83  Linux
/dev/hda8          1176      1371   1574338+  83  Linux
/dev/hda9          1372      1436    522081   82  Linux swap
/dev/hda10         1437      1501    522081   83  Linux
/dev/hda11         1502      1566    522081   83  Linux
Quoted 6 lines

[root@creddy-pc root]#

TIA,
- Narsimha Reddy CH
-

Well, you could change the partition type of the existing installation, in hope that the installer will ignore it. It doesn't matter to linux what the partition type is as long as it has a filesystem of the type expected in /etc/fstab.

Lawson

--
---oops---

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw

Thanks a lot for your help. It really worked with disk driud. It cleverly managed the name conflicts of lables i.e. for first installation the root is "/" and for the second installation the root lable is "/1". And I can boot both of them using LILO.

Regards,
- Narsimha

Quoted 78 lines · [email protected] wrote:
Quoted 38 lines · Narsimha Reddy CHALLA

Hi All,

I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,
/dev/hda8 ( /tmp),... /dev/hda11 etc.

But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.

Please give your suggestions on how to resolve this problem.

At present my partition table with single installation (rh 7.2) is,

[root@creddy-pc root]# fdisk -l

Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes

Device Boot Start End Blocks Id System

/dev/hda1   *         1       261   2096451    6  FAT16
/dev/hda2           262      2434  17454622+   5  Extended
/dev/hda5           262       522   2096451    6  FAT16
/dev/hda6           523       653   1052226   83  Linux
/dev/hda7           654      1175   4192933+  83  Linux
/dev/hda8          1176      1371   1574338+  83  Linux
/dev/hda9          1372      1436    522081   82  Linux swap
/dev/hda10         1437      1501    522081   83  Linux
/dev/hda11         1502      1566    522081   83  Linux
Quoted 8 lines

[root@creddy-pc root]#

TIA,
- Narsimha Reddy CH
-

Well, you could change the partition type of the existing installation, in hope that the installer will ignore it. It doesn't matter to linux what the partition type is as long as it has a filesystem of the type expected in /etc/fstab.

Lawson

--
---oops---

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Signature · 14 lines
Narsimha Reddy CH
Storage Area Networking, HCL Technologies
Contact +91-044 2372 8366 ext 1128

http://san.hcltech.com
http://www.hcltech.com



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs