How to install two linux OSes on the same PC
Quoted 18 lines · Narsimha Reddy CHALLA
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say/dev/hda5( /) ,/dev/hda6(/home) ,/dev/hda7( /usr) ,/dev/hda8( /tmp),.../dev/hda11etc.But how can I install the rh 8.0 in partitions say
/dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.
Quoted 1 line
Please give your suggestions on how to resolve this problem.
Edit properly in that menu where it ask's for partition info for installing.
I have Redhat 7.2, slackware gentoo and peanut all on one disk.
Slackware was installed first, then redhat.
Quoted 24 lines
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk
/dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytesDevice Boot Start End Blocks Id System /dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
Signature · 9 lines
Regards Richard [email protected] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 38 lines · Narsimha Reddy CHALLA
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say/dev/hda5( /) ,/dev/hda6(/home) ,/dev/hda7( /usr) ,/dev/hda8( /tmp),.../dev/hda11etc.But how can I install the rh 8.0 in partitions say
/dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.Please give your suggestions on how to resolve this problem.
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk
/dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytesDevice Boot Start End Blocks Id System /dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux
Quoted 6 lines
[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
-
Well, you could change the partition type of the existing installation, in hope that the installer will ignore it. It doesn't matter to linux what the partition type is as long as it has a filesystem of the type expected in /etc/fstab.
Lawson
--
---oops---
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,/dev/hda8 ( /tmp),... /dev/hda11 etc.
But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.
Please give your suggestions on how to resolve this problem.
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System /dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux
[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Thanks a lot for your help. It really worked with disk driud. It cleverly managed the name conflicts of lables i.e. for first installation the root is "/" and for the second installation the root lable is "/1". And I can boot both of them using LILO.
Regards,
- Narsimha
Quoted 78 lines · [email protected] wrote:
Quoted 38 lines · Narsimha Reddy CHALLA
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say/dev/hda5( /) ,/dev/hda6(/home) ,/dev/hda7( /usr) ,/dev/hda8( /tmp),.../dev/hda11etc.But how can I install the rh 8.0 in partitions say
/dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.Please give your suggestions on how to resolve this problem.
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk
/dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytesDevice Boot Start End Blocks Id System
/dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 LinuxQuoted 8 lines
[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
-Well, you could change the partition type of the existing installation, in hope that the installer will ignore it. It doesn't matter to linux what the partition type is as long as it has a filesystem of the type expected in
/etc/fstab.Lawson
--
---oops---________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Signature · 14 lines
Narsimha Reddy CH Storage Area Networking, HCL Technologies Contact +91-044 2372 8366 ext 1128 http://san.hcltech.com http://www.hcltech.com - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs