Skip to contentSkip to conversation

clk: bcm63xx-gate: add BCM6318 support

PATCH Superseded Álvaro Fernández Rojas 5 participants 16 messages Jun 9, 2020 – Jun 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover clk: bcm63xx-gate: add BCM6318 support

Add support for the gated clock controllers found on the BCM6318.

Álvaro Fernández Rojas (2):
dt-bindings: clock: bcm63xx: add 6318 gated clock bindings
clk: bcm63xx-gate: add BCM6318 support

 .../bindings/clock/brcm,bcm63xx-clocks.txt    |  2 +
 drivers/clk/bcm/clk-bcm63xx-gate.c            | 44 +++++++++++++++++++
 2 files changed, 46 insertions(+)
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/2 dt-bindings: clock: bcm63xx: add 6318 gated clock bindings

Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs.

---
 Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +2 -0
index 3041657e2f96..3e7ca5530775 100644
@@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
 Required properties:
 - compatible: must be one of:
 	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
 	 "brcm,bcm6328-clocks"
 	 "brcm,bcm6358-clocks"
 	 "brcm,bcm6362-clocks"
Signature · 1 line
2.26.2
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings

Quoted 4 lines · Álvaro Fernández Rojas

Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs.

Signature · 6 lines
Florian

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#3 lore raw

PATCH 2/2 clk: bcm63xx-gate: add BCM6318 support

In reply to Álvaro Fernández Rojas

Add support for the gated clock controllers found on the BCM6318.

---
 drivers/clk/bcm/clk-bcm63xx-gate.c | 44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
drivers/clk/bcm/clk-bcm63xx-gate.c +44 -0
index 98e884957db8..12394c091d13 100644
@@ -40,6 +40,48 @@ static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
 	{ },
 };
 
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+	{ .name = "adsl_asb", .bit = 0, },
+	{ .name = "usb_asb", .bit = 1, },
+	{ .name = "mips_asb", .bit = 2, },
+	{ .name = "pcie_asb", .bit = 3, },
+	{ .name = "phymips_asb", .bit = 4, },
+	{ .name = "robosw_asb", .bit = 5, },
+	{ .name = "sar_asb", .bit = 6, },
+	{ .name = "sdr_asb", .bit = 7, },
+	{ .name = "swreg_asb", .bit = 8, },
+	{ .name = "periph_asb", .bit = 9, },
+	{ .name = "cpubus160", .bit = 10, },
+	{ .name = "adsl", .bit = 11, },
+	{ .name = "sar124", .bit = 12, },
+	{ .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie", .bit = 14, },
+	{ .name = "robosw250", .bit = 16, },
+	{ .name = "robosw025", .bit = 17, },
+	{ .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+	{ .name = "usb", .bit = 20, },
+	{ .name = "hsspi", .bit = 25, },
+	{ .name = "pcie25", .bit = 27, },
+	{ .name = "phymips", .bit = 28, },
+	{ .name = "afe", .bit = 29, },
+	{ .name = "qproc", .bit = 30, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = {
+	{ .name = "adsl-ubus", .bit = 0, },
+	{ .name = "arb-ubus", .bit = 1, .flags = CLK_IS_CRITICAL, },
+	{ .name = "mips-ubus", .bit = 2, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie-ubus", .bit = 3, },
+	{ .name = "periph-ubus", .bit = 4, .flags = CLK_IS_CRITICAL, },
+	{ .name = "phymips-ubus", .bit = 5, },
+	{ .name = "robosw-ubus", .bit = 6, },
+	{ .name = "sar-ubus", .bit = 7, },
+	{ .name = "sdr-ubus", .bit = 8, },
+	{ .name = "usb-ubus", .bit = 9, },
+	{ },
+};
+
 static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
 	{ .name = "phy_mips", .bit = 0, },
 	{ .name = "adsl_qproc", .bit = 1, },
@@ -217,6 +259,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev)
 
 static const struct of_device_id clk_bcm63xx_dt_ids[] = {
 	{ .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, },
+	{ .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, },
+	{ .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, },
 	{ .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, },
 	{ .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, },
 	{ .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, },
Signature · 1 line
2.26.2
Reviewed-by on v1 2/2
#4 lore raw
Quoted 4 lines · Álvaro Fernández Rojas
drivers/clk/bcm/clk-bcm63xx-gate.c +4 -0
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+	{ .name = "adsl_asb", .bit = 0, },
+	{ .name = "usb_asb", .bit = 1, },
+	{ .name = "mips_asb", .bit = 2, },

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 56

Quoted 10 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +10 -0
+	{ .name = "pcie_asb", .bit = 3, },
+	{ .name = "phymips_asb", .bit = 4, },
+	{ .name = "robosw_asb", .bit = 5, },
+	{ .name = "sar_asb", .bit = 6, },
+	{ .name = "sdr_asb", .bit = 7, },
+	{ .name = "swreg_asb", .bit = 8, },
+	{ .name = "periph_asb", .bit = 9, },
+	{ .name = "cpubus160", .bit = 10, },
+	{ .name = "adsl", .bit = 11, },
+	{ .name = "sar124", .bit = 12, },

Nit: this should be sar125

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 62

Quoted 6 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +6 -0
+	{ .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie", .bit = 14, },
+	{ .name = "robosw250", .bit = 16, },
+	{ .name = "robosw025", .bit = 17, },
+	{ .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+	{ .name = "usb", .bit = 20, },

This should probably be "usbd" to indicate this is the USB device clock (not host)

With that fixed:

Signature · 1 line
Florian
#5 lore raw

Hi Florian,

Quoted 5 lines · Florian Fainelli

On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote:

Quoted 16 lines
Quoted 4 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +4 -0
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+	{ .name = "adsl_asb", .bit = 0, },
+	{ .name = "usb_asb", .bit = 1, },
+	{ .name = "mips_asb", .bit = 2, },

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 56

Quoted 10 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +10 -0
+	{ .name = "pcie_asb", .bit = 3, },
+	{ .name = "phymips_asb", .bit = 4, },
+	{ .name = "robosw_asb", .bit = 5, },
+	{ .name = "sar_asb", .bit = 6, },
+	{ .name = "sdr_asb", .bit = 7, },
+	{ .name = "swreg_asb", .bit = 8, },
+	{ .name = "periph_asb", .bit = 9, },
+	{ .name = "cpubus160", .bit = 10, },
+	{ .name = "adsl", .bit = 11, },
+	{ .name = "sar124", .bit = 12, },

Nit: this should be sar125

Nice catch, I will fix this in v2.

Quoted 10 lines

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 62

Quoted 7 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +6 -0
+	{ .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie", .bit = 14, },
+	{ .name = "robosw250", .bit = 16, },
+	{ .name = "robosw025", .bit = 17, },
+	{ .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+	{ .name = "usb", .bit = 20, },

This should probably be "usbd" to indicate this is the USB device clock (not host)

Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h:
#define USBD_CLK_EN (1 << 20)
#define USBH_CLK_EN (1 << 20)

Quoted 6 lines

With that fixed:

Signature · 1 line
Florian
#6 lore raw

Hi,

Quoted 35 lines · Álvaro Fernández Rojas

Hi Florian,

Quoted 20 lines · Florian Fainelli
Quoted 4 lines · Álvaro Fernández Rojas
drivers/clk/bcm/clk-bcm63xx-gate.c +4 -0
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+    { .name = "adsl_asb", .bit = 0, },
+    { .name = "usb_asb", .bit = 1, },
+    { .name = "mips_asb", .bit = 2, },

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 56

Quoted 10 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +10 -0
+    { .name = "pcie_asb", .bit = 3, },
+    { .name = "phymips_asb", .bit = 4, },
+    { .name = "robosw_asb", .bit = 5, },
+    { .name = "sar_asb", .bit = 6, },
+    { .name = "sdr_asb", .bit = 7, },
+    { .name = "swreg_asb", .bit = 8, },
+    { .name = "periph_asb", .bit = 9, },
+    { .name = "cpubus160", .bit = 10, },
+    { .name = "adsl", .bit = 11, },
+    { .name = "sar124", .bit = 12, },
Quoted 1 line

Nit: this should be sar125

Nice catch, I will fix this in v2.

Quoted 8 lines
Quoted 7 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +6 -0
+    { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+    { .name = "pcie", .bit = 14, },
+    { .name = "robosw250", .bit = 16, },
+    { .name = "robosw025", .bit = 17, },
+    { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+    { .name = "usb", .bit = 20, },
Quoted 6 lines
Quoted 2 lines

This should probably be "usbd" to indicate this is the USB device clock (not host)

Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h:
#define USBD_CLK_EN (1 << 20)
#define USBH_CLK_EN (1 << 20)

Is there a datasheet to verify that?

Quoted 8 lines
Quoted 7 lines

With that fixed:

--
Florian

#7 lore raw
Quoted 39 lines · Philippe Mathieu-Daudé

Hi,

Quoted 35 lines · Álvaro Fernández Rojas

Hi Florian,

Quoted 20 lines · Florian Fainelli
Quoted 4 lines · Álvaro Fernández Rojas
drivers/clk/bcm/clk-bcm63xx-gate.c +4 -0
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+    { .name = "adsl_asb", .bit = 0, },
+    { .name = "usb_asb", .bit = 1, },
+    { .name = "mips_asb", .bit = 2, },

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 56

Quoted 10 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +10 -0
+    { .name = "pcie_asb", .bit = 3, },
+    { .name = "phymips_asb", .bit = 4, },
+    { .name = "robosw_asb", .bit = 5, },
+    { .name = "sar_asb", .bit = 6, },
+    { .name = "sdr_asb", .bit = 7, },
+    { .name = "swreg_asb", .bit = 8, },
+    { .name = "periph_asb", .bit = 9, },
+    { .name = "cpubus160", .bit = 10, },
+    { .name = "adsl", .bit = 11, },
+    { .name = "sar124", .bit = 12, },
Quoted 1 line

Nit: this should be sar125

Nice catch, I will fix this in v2.

Quoted 8 lines
Quoted 7 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +6 -0
+    { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+    { .name = "pcie", .bit = 14, },
+    { .name = "robosw250", .bit = 16, },
+    { .name = "robosw025", .bit = 17, },
+    { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+    { .name = "usb", .bit = 20, },
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

This should probably be "usbd" to indicate this is the USB device clock (not host)

Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h:
#define USBD_CLK_EN (1 << 20)
#define USBH_CLK_EN (1 << 20)

Is there a datasheet to verify that?

Not a public one, but I can confirm this is correct given the internal datasheet.

Signature · 1 line
Florian
#8 lore raw
Quoted 43 lines · Florian Fainelli
Quoted 42 lines · Philippe Mathieu-Daudé

Hi,

Quoted 38 lines · Álvaro Fernández Rojas

Hi Florian,

Quoted 20 lines · Florian Fainelli
Quoted 4 lines · Álvaro Fernández Rojas
drivers/clk/bcm/clk-bcm63xx-gate.c +4 -0
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+    { .name = "adsl_asb", .bit = 0, },
+    { .name = "usb_asb", .bit = 1, },
+    { .name = "mips_asb", .bit = 2, },

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 56

Quoted 10 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +10 -0
+    { .name = "pcie_asb", .bit = 3, },
+    { .name = "phymips_asb", .bit = 4, },
+    { .name = "robosw_asb", .bit = 5, },
+    { .name = "sar_asb", .bit = 6, },
+    { .name = "sdr_asb", .bit = 7, },
+    { .name = "swreg_asb", .bit = 8, },
+    { .name = "periph_asb", .bit = 9, },
+    { .name = "cpubus160", .bit = 10, },
+    { .name = "adsl", .bit = 11, },
+    { .name = "sar124", .bit = 12, },
Quoted 1 line

Nit: this should be sar125

Nice catch, I will fix this in v2.

Quoted 10 lines

drivers/clk/bcm/clk-bcm63xx-gate.c static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { · line 62

Quoted 7 lines
drivers/clk/bcm/clk-bcm63xx-gate.c +6 -0
+    { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+    { .name = "pcie", .bit = 14, },
+    { .name = "robosw250", .bit = 16, },
+    { .name = "robosw025", .bit = 17, },
+    { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+    { .name = "usb", .bit = 20, },

This should probably be "usbd" to indicate this is the USB device clock (not host)

Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h:
#define USBD_CLK_EN (1 << 20)
#define USBH_CLK_EN (1 << 20)

Is there a datasheet to verify that?

Not a public one, but I can confirm this is correct given the internal datasheet.

OK thank you Florian.

Quoted 2 lines

--
Florian

#9 lore raw

v2 cover clk: bcm63xx-gate: add BCM6318 support

In reply to Álvaro Fernández Rojas

Add support for the gated clock controllers found on the BCM6318.

Álvaro Fernández Rojas (2):
dt-bindings: clock: bcm63xx: add 6318 gated clock bindings
clk: bcm63xx-gate: add BCM6318 support

 .../bindings/clock/brcm,bcm63xx-clocks.txt    |  2 +
 drivers/clk/bcm/clk-bcm63xx-gate.c            | 44 +++++++++++++++++++
 2 files changed, 46 insertions(+)
Signature · 1 line
2.26.2
#10 lore raw

PATCH v2 1/2 dt-bindings: clock: bcm63xx: add 6318 gated clock bindings

Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs.

---
v2: no changes.

 Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +2 -0
index 3041657e2f96..3e7ca5530775 100644
@@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
 Required properties:
 - compatible: must be one of:
 	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
 	 "brcm,bcm6328-clocks"
 	 "brcm,bcm6358-clocks"
 	 "brcm,bcm6362-clocks"
Signature · 1 line
2.26.2
maintainer Acked-by on v2 1/2
#11 lore raw

Re: [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings

Quoted 11 lines · Álvaro Fernández Rojas

Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs.

---
v2: no changes.

 Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++
 1 file changed, 2 insertions(+)
maintainer Applied
#12 lore raw

Re: [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings

In reply to Álvaro Fernández Rojas

Quoting Álvaro Fernández Rojas (2020-06-10 07:08:57)

Quoted 6 lines

Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs.

---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#13 lore raw

PATCH v2 2/2 clk: bcm63xx-gate: add BCM6318 support

In reply to Álvaro Fernández Rojas

Add support for the gated clock controllers found on the BCM6318.

---
v2: correct names for sar125 and usbd

 drivers/clk/bcm/clk-bcm63xx-gate.c | 44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
drivers/clk/bcm/clk-bcm63xx-gate.c +44 -0
index 98e884957db8..fce6746cc607 100644
@@ -40,6 +40,48 @@ static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
 	{ },
 };
 
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+	{ .name = "adsl_asb", .bit = 0, },
+	{ .name = "usb_asb", .bit = 1, },
+	{ .name = "mips_asb", .bit = 2, },
+	{ .name = "pcie_asb", .bit = 3, },
+	{ .name = "phymips_asb", .bit = 4, },
+	{ .name = "robosw_asb", .bit = 5, },
+	{ .name = "sar_asb", .bit = 6, },
+	{ .name = "sdr_asb", .bit = 7, },
+	{ .name = "swreg_asb", .bit = 8, },
+	{ .name = "periph_asb", .bit = 9, },
+	{ .name = "cpubus160", .bit = 10, },
+	{ .name = "adsl", .bit = 11, },
+	{ .name = "sar125", .bit = 12, },
+	{ .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie", .bit = 14, },
+	{ .name = "robosw250", .bit = 16, },
+	{ .name = "robosw025", .bit = 17, },
+	{ .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
+	{ .name = "usbd", .bit = 20, },
+	{ .name = "hsspi", .bit = 25, },
+	{ .name = "pcie25", .bit = 27, },
+	{ .name = "phymips", .bit = 28, },
+	{ .name = "afe", .bit = 29, },
+	{ .name = "qproc", .bit = 30, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = {
+	{ .name = "adsl-ubus", .bit = 0, },
+	{ .name = "arb-ubus", .bit = 1, .flags = CLK_IS_CRITICAL, },
+	{ .name = "mips-ubus", .bit = 2, .flags = CLK_IS_CRITICAL, },
+	{ .name = "pcie-ubus", .bit = 3, },
+	{ .name = "periph-ubus", .bit = 4, .flags = CLK_IS_CRITICAL, },
+	{ .name = "phymips-ubus", .bit = 5, },
+	{ .name = "robosw-ubus", .bit = 6, },
+	{ .name = "sar-ubus", .bit = 7, },
+	{ .name = "sdr-ubus", .bit = 8, },
+	{ .name = "usb-ubus", .bit = 9, },
+	{ },
+};
+
 static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
 	{ .name = "phy_mips", .bit = 0, },
 	{ .name = "adsl_qproc", .bit = 1, },
@@ -217,6 +259,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev)
 
 static const struct of_device_id clk_bcm63xx_dt_ids[] = {
 	{ .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, },
+	{ .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, },
+	{ .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, },
 	{ .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, },
 	{ .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, },
 	{ .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, },
Signature · 1 line
2.26.2
maintainer
#15 lore raw
In reply to Álvaro Fernández Rojas
Quoted 10 lines

Add support for the gated clock controllers found on the BCM6318.

Álvaro Fernández Rojas (2):
dt-bindings: clock: bcm63xx: add 6318 gated clock bindings
clk: bcm63xx-gate: add BCM6318 support

 .../bindings/clock/brcm,bcm63xx-clocks.txt    |  2 +
 drivers/clk/bcm/clk-bcm63xx-gate.c            | 44 +++++++++++++++++++
 2 files changed, 46 insertions(+)

Sorry please don't send these in reply to the original patch series. I have a hard time finding new patch series in my 'thread summary' view.