auotfs v4
Any ideas what 'mount table full' means?
Nov 6 10:08:44 linn automount[27555]: >> NFSv3 not supported! Nov 6 10:08:44 linn automount[27555]: >> mount table full Nov 6 10:08:44 linn automount[27555]: mount(nfs): nfs: mount failure fs7:/vol/vol0/systems/celia/utils on /celia/utils/ Nov 6 10:09:15 linn automount[1899]: attempting to mount entry /misc/hsm_cache Nov 6 10:09:15 linn automount[27589]: >> NFSv3 not supported! Nov 6 10:09:15 linn automount[27589]: >> mount table full Nov 6 10:09:15 linn automount[27589]: mount(nfs): nfs: mount failure fs8:/vol/vol0/hsm_cache on /misc/hsm_cache/
Everything works fine after a reboot.
Signature · 7 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Rhythm & Hues 5404 Jandy Place Los Angeles, CA 90066 Voice: 310 448-7763 Fax: 310 448-7600 [email protected]
Quoted 11 lines · Greg Bradner
Any ideas what 'mount table full' means?
Nov 6 10:08:44 linn automount[27555]: >> NFSv3 not supported! Nov 6 10:08:44 linn automount[27555]: >> mount table full Nov 6 10:08:44 linn automount[27555]: mount(nfs): nfs: mount failure fs7:/vol/vol0/systems/celia/utils on /celia/utils/ Nov 6 10:09:15 linn automount[1899]: attempting to mount entry /misc/hsm_cache Nov 6 10:09:15 linn automount[27589]: >> NFSv3 not supported! Nov 6 10:09:15 linn automount[27589]: >> mount table full Nov 6 10:09:15 linn automount[27589]: mount(nfs): nfs: mount failure fs8:/vol/vol0/hsm_cache on /misc/hsm_cache/Everything works fine after a reboot.
It means that you have more than 256 mounts that don't have a block-device back-end. These include NFS, autofs, procfs, sysfs...
This is a known limitation in linux 2.4. You may want to try a patch like the following:
http://people.redhat.com/zaitcev/linux/linux-2.4.19-pre7-unmaj.diff
Signature · 10 lines
Mike Waychison Sun Microsystems, Inc. 1 (650) 352-5299 voice 1 (416) 202-8336 voice mailto: [email protected] http://www.sun.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NOTICE: The opinions expressed in this email are held by me, and may not represent the views of Sun Microsystems, Inc. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hi,
check your /proc/mounts file when it happens.
As you were already told it happens because of more than 256 nfs mounts
- but the question is wether you really have to mount that many (then you have a problem, but there must be some patches to fix it) - or whether it's an automounter problem.. I myself experienced such a thing that tried to mount the same location many times till it filled the whole mount table.
- Oren
Quoted 13 lines · Greg Bradner
Any ideas what 'mount table full' means?
Nov 6 10:08:44 linn automount[27555]: >> NFSv3 not supported! Nov 6 10:08:44 linn automount[27555]: >> mount table full Nov 6 10:08:44 linn automount[27555]: mount(nfs): nfs: mount failure fs7:/vol/vol0/systems/celia/utils on /celia/utils/ Nov 6 10:09:15 linn automount[1899]: attempting to mount entry /misc/hsm_cache Nov 6 10:09:15 linn automount[27589]: >> NFSv3 not supported! Nov 6 10:09:15 linn automount[27589]: >> mount table full Nov 6 10:09:15 linn automount[27589]: mount(nfs): nfs: mount failurefs8:/vol/vol0/hsm_cache on /misc/hsm_cache/
Everything works fine after a reboot.
It does seem to be a problem with /proc/mounts. But I can't tell if it can't umount or if it's trying to mount the same location. How can I tell?
Quoted 27 lines · Oren Held
Hi,
check your
/proc/mountsfile when it happens.
As you were already told it happens because of more than 256 nfs mounts
- but the question is wether you really have to mount that many (then you have a problem, but there must be some patches to fix it) - or whether it's an automounter problem.. I myself experienced such a thing that tried to mount the same location many times till it filled the whole mount table.- Oren
Quoted 12 lines · Greg Bradner
Any ideas what 'mount table full' means?
Nov 6 10:08:44 linn automount[27555]: >> NFSv3 not supported! Nov 6 10:08:44 linn automount[27555]: >> mount table full Nov 6 10:08:44 linn automount[27555]: mount(nfs): nfs: mount failure fs7:/vol/vol0/systems/celia/utils on /celia/utils/ Nov 6 10:09:15 linn automount[1899]: attempting to mount entry /misc/hsm_cache Nov 6 10:09:15 linn automount[27589]: >> NFSv3 not supported! Nov 6 10:09:15 linn automount[27589]: >> mount table full Nov 6 10:09:15 linn automount[27589]: mount(nfs): nfs: mount failure fs8:/vol/vol0/hsm_cache on /misc/hsm_cache/Everything works fine after a reboot.
Signature · 7 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Rhythm & Hues 5404 Jandy Place Los Angeles, CA 90066 Voice: 310 448-7763 Fax: 310 448-7600 [email protected]