s390x: Increase architectural compliance
cover s390x: Increase architectural compliance
On a diag 308 subcode 0 and 1 we need to load the whole reset PSW and not just the address.
On a cpu reset normal, we need to clear local cpus. Unfortunately we need a new API for that, since KVM only exposes one of the three resets.
Patches are also in my cleanup branch.
Janosch Frank (3):
s390x: Properly fetch and test the short psw on diag308 subc 0/1 Sync reset
s390x: protvirt: Add new VCPU reset functions
linux-headers/linux/kvm.h | 7 +++++++ target/s390x/cpu.c | 26 ++++++++++++++++++++++---- target/s390x/cpu.h | 1 + target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 6 files changed, 74 insertions(+), 12 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/3 s390x: Properly fetch and test the short psw on diag308 subc 0/1
We need to actually fetch the cpu mask and set it. As we invert the short psw indication in the mask, SIE will report a specification exception, if it wasn't present in the reset psw.
--- target/s390x/cpu.c | 12 ++++++++++-- target/s390x/cpu.h | 1 + 2 files changed, 11 insertions(+), 2 deletions(-)
target/s390x/cpu.c +10 -2
@@ -76,8 +76,16 @@ static bool s390_cpu_has_work(CPUState *cs)static void s390_cpu_load_normal (CPUState *s) {S390CPU *cpu =S390_CPU (s); - cpu->env.psw.addr =ldl_phys (s->as,4 ) &PSW_MASK_ESA_ADDR ; - cpu->env.psw.mask =PSW_MASK_32 |PSW_MASK_64 ; +uint64_t spsw =ldq_phys (s->as,0 ); + + cpu->env.psw.mask = spsw &0xffffffff80000000ULL ; +/* +* Invert short psw indication, so SIE will report a specification +* exception if it was not set. +*/ + cpu->env.psw.mask ^=PSW_MASK_SHORTPSW ; + cpu->env.psw.addr = spsw &0x7fffffffULL ; +s390_cpu_set_state (S390_CPU_STATE_OPERATING , cpu); }#endif
target/s390x/cpu.h +1 -0
@@ -265,6 +265,7 @@ extern const VMStateDescription vmstate_s390_cpu;#define PSW_MASK_EXT 0x0100000000000000ULL#define PSW_MASK_KEY 0x00F0000000000000ULL#define PSW_SHIFT_KEY 52 +#define PSW_MASK_SHORTPSW 0x0008000000000000ULL#define PSW_MASK_MCHECK 0x0004000000000000ULL#define PSW_MASK_WAIT 0x0002000000000000ULL#define PSW_MASK_PSTATE 0x0001000000000000ULL
Signature · 1 line
2.20.1
Cornelia Huck
AppliedRe: [PATCH 1/3] s390x: Properly fetch and test the short psw on diag308 subc 0/1
Quoted 10 lines · On Fri, 29 Nov 2019 09:20:23 -0500 Janosch Frank <[email protected]> wrote:
We need to actually fetch the cpu mask and set it. As we invert the short psw indication in the mask, SIE will report a specification exception, if it wasn't present in the reset psw.
Signed-off-by Janosch Frank <[email protected]>Reviewed-by David Hildenbrand <[email protected]>--- target/s390x/cpu.c | 12 ++++++++++-- target/s390x/cpu.h | 1 + 2 files changed, 11 insertions(+), 2 deletions(-)
Thanks, applied.
Re: [PATCH 1/3] s390x: Properly fetch and test the short psw on diag308 subc 0/1
In reply to Janosch FrankQuoted 10 lines · On Fri, 29 Nov 2019 09:20:23 -0500 Janosch Frank <[email protected]> wrote:
We need to actually fetch the cpu mask and set it. As we invert the short psw indication in the mask, SIE will report a specification exception, if it wasn't present in the reset psw.
Signed-off-by Janosch Frank <[email protected]>Reviewed-by David Hildenbrand <[email protected]>--- target/s390x/cpu.c | 12 ++++++++++-- target/s390x/cpu.h | 1 + 2 files changed, 11 insertions(+), 2 deletions(-)
Thanks, requeued.
PATCH 2/3 Sync reset
In reply to Janosch Frank--- linux-headers/linux/kvm.h | 7 +++++++ 1 file changed, 7 insertions(+)
linux-headers/linux/kvm.h +7 -0
@@ -1000,6 +1000,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_PMU_EVENT_FILTER 173#define KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 174#define KVM_CAP_HYPERV_DIRECT_TLBFLUSH 175 +#define KVM_CAP_S390_VCPU_RESETS 180#ifdef KVM_CAP_IRQ_ROUTING
@@ -1461,6 +1462,12 @@ struct kvm_enc_region {/* Available with KVM_CAP_ARM_SVE */ #define KVM_ARM_VCPU_FINALIZE _IOW(KVMIO, 0xc2, int) +#define KVM_S390_VCPU_RESET_NORMAL 0 +#define KVM_S390_VCPU_RESET_INITIAL 1 +#define KVM_S390_VCPU_RESET_CLEAR 2 + +#define KVM_S390_VCPU_RESET _IO(KVMIO, 0xc3) +/* Secure Encrypted Virtualization command */ enum sev_cmd_id {/* Guest initialization commands */
Signature · 1 line
2.20.1
PATCH 3/3 s390x: protvirt: Add new VCPU reset functions
In reply to Janosch FrankCPU resets for protected guests need to be done via Ultravisor calls. Hence we need a way to issue these calls for each reset.
As we formerly had only one reset function and it was called for initial, as well as for the clear reset, we now need a new interface.
--- target/s390x/cpu.c | 14 ++++++++++++-- target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 4 files changed, 56 insertions(+), 10 deletions(-)
target/s390x/cpu.c +12 -2
@@ -139,8 +139,18 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) }/* Reset state inside the kernel that we cannot access yet from QEMU. */ -if (kvm_enabled () && type !=S390_CPU_RESET_NORMAL ) { -kvm_s390_reset_vcpu (cpu); +if (kvm_enabled ()) { +switch (type) { +case S390_CPU_RESET_CLEAR : +kvm_s390_reset_vcpu_clear (cpu); +break ; +case S390_CPU_RESET_INITIAL : +kvm_s390_reset_vcpu_initial (cpu); +break ; +case S390_CPU_RESET_NORMAL : +kvm_s390_reset_vcpu_normal (cpu); +break ; + } } }
target/s390x/kvm-stub.c +9 -1
@@ -83,7 +83,15 @@ void kvm_s390_cmma_reset(void) { } -void kvm_s390_reset_vcpu (S390CPU *cpu) +void kvm_s390_reset_vcpu_initial (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_clear (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_normal (S390CPU *cpu) { }
target/s390x/kvm.c +32 -6
@@ -151,6 +151,7 @@ static int cap_s390_irq;static int cap_ri;static int cap_gs;static int cap_hpage_1m; +static int cap_vcpu_resets;static int active_cmma;
@@ -342,6 +343,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s) cap_async_pf =kvm_check_extension (s,KVM_CAP_ASYNC_PF ); cap_mem_op =kvm_check_extension (s,KVM_CAP_S390_MEM_OP ); cap_s390_irq =kvm_check_extension (s,KVM_CAP_S390_INJECT_IRQ ); + cap_vcpu_resets =kvm_check_extension (s,KVM_CAP_S390_VCPU_RESETS );if (!kvm_check_extension (s,KVM_CAP_S390_GMAP ) || !kvm_check_extension (s,KVM_CAP_S390_COW )) {
@@ -403,20 +405,44 @@ int kvm_arch_destroy_vcpu(CPUState *cs)return 0 ; } -void kvm_s390_reset_vcpu (S390CPU *cpu) +static void kvm_s390_reset_vcpu (S390CPU *cpu,unsigned long type) {CPUState *cs =CPU (cpu); -/* The initial reset call is needed here to reset in-kernel -* vcpu data that we can't access directly from QEMU -* (i.e. with older kernels which don't support sync_regs/ONE_REG). -* Before this ioctl cpu_synchronize_state() is called in common kvm -* code (kvm-all) */ +/* +* The reset call is needed here to reset in-kernel vcpu data that +* we can't access directly from QEMU (i.e. with older kernels +* which don't support sync_regs/ONE_REG). Before this ioctl +* cpu_synchronize_state() is called in common kvm code +* (kvm-all). +*/ +if (cap_vcpu_resets) { +if (kvm_vcpu_ioctl (cs,KVM_S390_VCPU_RESET , type)) { +error_report ("CPU reset type %ld failed on CPU %i" , + type, cs->cpu_index); + } +return ; + }if (kvm_vcpu_ioctl (cs,KVM_S390_INITIAL_RESET ,NULL )) {error_report ("Initial CPU reset failed on CPU %i" , cs->cpu_index); } } +void kvm_s390_reset_vcpu_initial (S390CPU *cpu) +{ +kvm_s390_reset_vcpu (cpu,KVM_S390_VCPU_RESET_INITIAL ); +} + +void kvm_s390_reset_vcpu_clear (S390CPU *cpu) +{ +kvm_s390_reset_vcpu (cpu,KVM_S390_VCPU_RESET_CLEAR ); +} + +void kvm_s390_reset_vcpu_normal (S390CPU *cpu) +{ +kvm_s390_reset_vcpu (cpu,KVM_S390_VCPU_RESET_NORMAL ); +} +static int can_sync_regs (CPUState *cs,int regs) {return cap_sync_regs && (cs->kvm_run->kvm_valid_regs & regs) == regs;
target/s390x/kvm_s390x.h +3 -1
@@ -34,7 +34,9 @@ int kvm_s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch, int vq, bool assign);int kvm_s390_cmma_active (void );void kvm_s390_cmma_reset (void ); -void kvm_s390_reset_vcpu (S390CPU *cpu); +void kvm_s390_reset_vcpu_clear (S390CPU *cpu); +void kvm_s390_reset_vcpu_normal (S390CPU *cpu); +void kvm_s390_reset_vcpu_initial (S390CPU *cpu);int kvm_s390_set_mem_limit (uint64_t new_limit,uint64_t *hw_limit);void kvm_s390_set_max_pagesize (uint64_t pagesize,Error **errp);void kvm_s390_crypto_reset (void );
Signature · 1 line
2.20.1
Re: [PATCH 3/3] s390x: protvirt: Add new VCPU reset functions
Quoted 102 lines · Janosch Frank
CPU resets for protected guests need to be done via Ultravisor calls. Hence we need a way to issue these calls for each reset.
As we formerly had only one reset function and it was called for initial, as well as for the clear reset, we now need a new interface.
Signed-off-by Janosch Frank <[email protected]>--- target/s390x/cpu.c | 14 ++++++++++++-- target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 4 files changed, 56 insertions(+), 10 deletions(-)target/s390x/cpu.c +12
-2@@ -139,8 +139,18 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) }/* Reset state inside the kernel that we cannot access yet from QEMU. */ -if (kvm_enabled () && type !=S390_CPU_RESET_NORMAL ) { -kvm_s390_reset_vcpu (cpu); +if (kvm_enabled ()) { +switch (type) { +case S390_CPU_RESET_CLEAR : +kvm_s390_reset_vcpu_clear (cpu); +break ; +case S390_CPU_RESET_INITIAL : +kvm_s390_reset_vcpu_initial (cpu); +break ; +case S390_CPU_RESET_NORMAL : +kvm_s390_reset_vcpu_normal (cpu); +break ; + } } }target/s390x/kvm-stub.c +9
-1@@ -83,7 +83,15 @@ void kvm_s390_cmma_reset(void) { } -void kvm_s390_reset_vcpu (S390CPU *cpu) +void kvm_s390_reset_vcpu_initial (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_clear (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_normal (S390CPU *cpu) { }target/s390x/kvm.c +11
-6@@ -151,6 +151,7 @@ static int cap_s390_irq;static int cap_ri;static int cap_gs;static int cap_hpage_1m; +static int cap_vcpu_resets;static int active_cmma;@@ -342,6 +343,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s) cap_async_pf =kvm_check_extension (s,KVM_CAP_ASYNC_PF ); cap_mem_op =kvm_check_extension (s,KVM_CAP_S390_MEM_OP ); cap_s390_irq =kvm_check_extension (s,KVM_CAP_S390_INJECT_IRQ ); + cap_vcpu_resets =kvm_check_extension (s,KVM_CAP_S390_VCPU_RESETS );if (!kvm_check_extension (s,KVM_CAP_S390_GMAP ) || !kvm_check_extension (s,KVM_CAP_S390_COW )) {@@ -403,20 +405,44 @@ int kvm_arch_destroy_vcpu(CPUState *cs)return 0 ; } -void kvm_s390_reset_vcpu (S390CPU *cpu) +static void kvm_s390_reset_vcpu (S390CPU *cpu,unsigned long type) {CPUState *cs =CPU (cpu); -/* The initial reset call is needed here to reset in-kernel -* vcpu data that we can't access directly from QEMU -* (i.e. with older kernels which don't support sync_regs/ONE_REG). -* Before this ioctl cpu_synchronize_state() is called in common kvm -* code (kvm-all) */ +/* +* The reset call is needed here to reset in-kernel vcpu data that +* we can't access directly from QEMU (i.e. with older kernels +* which don't support sync_regs/ONE_REG). Before this ioctl +* cpu_synchronize_state() is called in common kvm code +* (kvm-all). +*/ +if (cap_vcpu_resets) {
target/s390x/kvm.c int kvm_arch_destroy_vcpu(CPUState *cs) · line 429
Quoted 10 lines
target/s390x/kvm.c +6
-0+if (kvm_vcpu_ioctl (cs,KVM_S390_VCPU_RESET , type)) { +error_report ("CPU reset type %ld failed on CPU %i" , + type, cs->cpu_index); + } +return ; + }if (kvm_vcpu_ioctl (cs,KVM_S390_INITIAL_RESET ,NULL )) {error_report ("Initial CPU reset failed on CPU %i" , cs->cpu_index); } }
I think I commented this already: The issue is that without cap_vcpu_requests, you would no do a KVM_S390_INITIAL_RESET for type == S390_CPU_RESET_NORMAL. You have to fence that.
if (type != S390_CPU_RESET_NORMAL &&
kvm_vcpu_ioctl(cs, KVM_S390_INITIAL_RESET, NULL)) {
...
}Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH 3/3] s390x: protvirt: Add new VCPU reset functions
Quoted 109 lines · David Hildenbrand
Quoted 108 lines · Janosch Frank
CPU resets for protected guests need to be done via Ultravisor calls. Hence we need a way to issue these calls for each reset.
As we formerly had only one reset function and it was called for initial, as well as for the clear reset, we now need a new interface.
Signed-off-by Janosch Frank <[email protected]>--- target/s390x/cpu.c | 14 ++++++++++++-- target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 4 files changed, 56 insertions(+), 10 deletions(-)target/s390x/cpu.c +12
-2@@ -139,8 +139,18 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) }/* Reset state inside the kernel that we cannot access yet from QEMU. */ -if (kvm_enabled () && type !=S390_CPU_RESET_NORMAL ) { -kvm_s390_reset_vcpu (cpu); +if (kvm_enabled ()) { +switch (type) { +case S390_CPU_RESET_CLEAR : +kvm_s390_reset_vcpu_clear (cpu); +break ; +case S390_CPU_RESET_INITIAL : +kvm_s390_reset_vcpu_initial (cpu); +break ; +case S390_CPU_RESET_NORMAL : +kvm_s390_reset_vcpu_normal (cpu); +break ; + } } }target/s390x/kvm-stub.c +9
-1@@ -83,7 +83,15 @@ void kvm_s390_cmma_reset(void) { } -void kvm_s390_reset_vcpu (S390CPU *cpu) +void kvm_s390_reset_vcpu_initial (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_clear (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_normal (S390CPU *cpu) { }target/s390x/kvm.c +17
-6@@ -151,6 +151,7 @@ static int cap_s390_irq;static int cap_ri;static int cap_gs;static int cap_hpage_1m; +static int cap_vcpu_resets;static int active_cmma;@@ -342,6 +343,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s) cap_async_pf =kvm_check_extension (s,KVM_CAP_ASYNC_PF ); cap_mem_op =kvm_check_extension (s,KVM_CAP_S390_MEM_OP ); cap_s390_irq =kvm_check_extension (s,KVM_CAP_S390_INJECT_IRQ ); + cap_vcpu_resets =kvm_check_extension (s,KVM_CAP_S390_VCPU_RESETS );if (!kvm_check_extension (s,KVM_CAP_S390_GMAP ) || !kvm_check_extension (s,KVM_CAP_S390_COW )) {@@ -403,20 +405,44 @@ int kvm_arch_destroy_vcpu(CPUState *cs)return 0 ; } -void kvm_s390_reset_vcpu (S390CPU *cpu) +static void kvm_s390_reset_vcpu (S390CPU *cpu,unsigned long type) {CPUState *cs =CPU (cpu); -/* The initial reset call is needed here to reset in-kernel -* vcpu data that we can't access directly from QEMU -* (i.e. with older kernels which don't support sync_regs/ONE_REG). -* Before this ioctl cpu_synchronize_state() is called in common kvm -* code (kvm-all) */ +/* +* The reset call is needed here to reset in-kernel vcpu data that +* we can't access directly from QEMU (i.e. with older kernels +* which don't support sync_regs/ONE_REG). Before this ioctl +* cpu_synchronize_state() is called in common kvm code +* (kvm-all). +*/ +if (cap_vcpu_resets) { +if (kvm_vcpu_ioctl (cs,KVM_S390_VCPU_RESET , type)) { +error_report ("CPU reset type %ld failed on CPU %i" , + type, cs->cpu_index); + } +return ; + }
Quoted 8 lines
target/s390x/kvm.c int kvm_arch_destroy_vcpu(CPUState *cs) · line 429
Quoted 4 lines
target/s390x/kvm.c +0
-0if (kvm_vcpu_ioctl (cs,KVM_S390_INITIAL_RESET ,NULL )) {error_report ("Initial CPU reset failed on CPU %i" , cs->cpu_index); } }I think I commented this already: The issue is that without
cap_vcpu_requests, you would no do aKVM_S390_INITIAL_RESETfor type ==S390_CPU_RESET_NORMAL. You have to fence that.
I did fix that, but not on this branch -_-
Quoted 7 lines
if (type !=
S390_CPU_RESET_NORMAL&&kvm_vcpu_ioctl(cs, KVM_S390_INITIAL_RESET, NULL)) { ... }
Re: [PATCH 3/3] s390x: protvirt: Add new VCPU reset functions
Quoted 119 lines · Janosch Frank
Quoted 109 lines · David Hildenbrand
Quoted 108 lines · Janosch Frank
CPU resets for protected guests need to be done via Ultravisor calls. Hence we need a way to issue these calls for each reset.
As we formerly had only one reset function and it was called for initial, as well as for the clear reset, we now need a new interface.
Signed-off-by Janosch Frank <[email protected]>--- target/s390x/cpu.c | 14 ++++++++++++-- target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 4 files changed, 56 insertions(+), 10 deletions(-)target/s390x/cpu.c +12
-2@@ -139,8 +139,18 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) }/* Reset state inside the kernel that we cannot access yet from QEMU. */ -if (kvm_enabled () && type !=S390_CPU_RESET_NORMAL ) { -kvm_s390_reset_vcpu (cpu); +if (kvm_enabled ()) { +switch (type) { +case S390_CPU_RESET_CLEAR : +kvm_s390_reset_vcpu_clear (cpu); +break ; +case S390_CPU_RESET_INITIAL : +kvm_s390_reset_vcpu_initial (cpu); +break ; +case S390_CPU_RESET_NORMAL : +kvm_s390_reset_vcpu_normal (cpu); +break ; + } } }target/s390x/kvm-stub.c +9
-1@@ -83,7 +83,15 @@ void kvm_s390_cmma_reset(void) { } -void kvm_s390_reset_vcpu (S390CPU *cpu) +void kvm_s390_reset_vcpu_initial (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_clear (S390CPU *cpu) +{ +} + +void kvm_s390_reset_vcpu_normal (S390CPU *cpu) { }target/s390x/kvm.c +17
-6@@ -151,6 +151,7 @@ static int cap_s390_irq;static int cap_ri;static int cap_gs;static int cap_hpage_1m; +static int cap_vcpu_resets;static int active_cmma;@@ -342,6 +343,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s) cap_async_pf =kvm_check_extension (s,KVM_CAP_ASYNC_PF ); cap_mem_op =kvm_check_extension (s,KVM_CAP_S390_MEM_OP ); cap_s390_irq =kvm_check_extension (s,KVM_CAP_S390_INJECT_IRQ ); + cap_vcpu_resets =kvm_check_extension (s,KVM_CAP_S390_VCPU_RESETS );if (!kvm_check_extension (s,KVM_CAP_S390_GMAP ) || !kvm_check_extension (s,KVM_CAP_S390_COW )) {@@ -403,20 +405,44 @@ int kvm_arch_destroy_vcpu(CPUState *cs)return 0 ; } -void kvm_s390_reset_vcpu (S390CPU *cpu) +static void kvm_s390_reset_vcpu (S390CPU *cpu,unsigned long type) {CPUState *cs =CPU (cpu); -/* The initial reset call is needed here to reset in-kernel -* vcpu data that we can't access directly from QEMU -* (i.e. with older kernels which don't support sync_regs/ONE_REG). -* Before this ioctl cpu_synchronize_state() is called in common kvm -* code (kvm-all) */ +/* +* The reset call is needed here to reset in-kernel vcpu data that +* we can't access directly from QEMU (i.e. with older kernels +* which don't support sync_regs/ONE_REG). Before this ioctl +* cpu_synchronize_state() is called in common kvm code +* (kvm-all). +*/ +if (cap_vcpu_resets) { +if (kvm_vcpu_ioctl (cs,KVM_S390_VCPU_RESET , type)) { +error_report ("CPU reset type %ld failed on CPU %i" , + type, cs->cpu_index); + } +return ; + }Quoted 8 lines
target/s390x/kvm.c int kvm_arch_destroy_vcpu(CPUState *cs) · line 429
Quoted 4 lines
target/s390x/kvm.c +0
-0if (kvm_vcpu_ioctl (cs,KVM_S390_INITIAL_RESET ,NULL )) {error_report ("Initial CPU reset failed on CPU %i" , cs->cpu_index); } }I think I commented this already: The issue is that without
cap_vcpu_requests, you would no do aKVM_S390_INITIAL_RESETfor type ==S390_CPU_RESET_NORMAL. You have to fence that.
Quoted 1 line
I did fix that, but not on this branch -_-
You can avoid that completely once you switch to two new separate ioctls ;)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 14 lines · On Fri, 29 Nov 2019 09:20:22 -0500 Janosch Frank <[email protected]> wrote:
On a diag 308 subcode 0 and 1 we need to load the whole reset PSW and not just the address.
On a cpu reset normal, we need to clear local cpus. Unfortunately we need a new API for that, since KVM only exposes one of the three resets.
Patches are also in my cleanup branch.
Janosch Frank (3):
s390x: Properly fetch and test the short psw on diag308 subc 0/1 Sync reset
s390x: protvirt: Add new VCPU reset functions
Quoted 8 lines
linux-headers/linux/kvm.h | 7 +++++++ target/s390x/cpu.c | 26 ++++++++++++++++++++++---- target/s390x/cpu.h | 1 + target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 6 files changed, 74 insertions(+), 12 deletions(-)
Ok, it seems I should just go ahead and pick patch 1, and defer the remainder until after we agree on the interface, right?
Quoted 26 lines · Cornelia Huck
Quoted 14 lines · On Fri, 29 Nov 2019 09:20:22 -0500 Janosch Frank <[email protected]> wrote:
On a diag 308 subcode 0 and 1 we need to load the whole reset PSW and not just the address.
On a cpu reset normal, we need to clear local cpus. Unfortunately we need a new API for that, since KVM only exposes one of the three resets.
Patches are also in my cleanup branch.
Janosch Frank (3):
s390x: Properly fetch and test the short psw on diag308 subc 0/1 Sync reset
s390x: protvirt: Add new VCPU reset functionsQuoted 8 lines
linux-headers/linux/kvm.h | 7 +++++++ target/s390x/cpu.c | 26 ++++++++++++++++++++++---- target/s390x/cpu.h | 1 + target/s390x/kvm-stub.c | 10 +++++++++- target/s390x/kvm.c | 38 ++++++++++++++++++++++++++++++++------ target/s390x/kvm_s390x.h | 4 +++- 6 files changed, 74 insertions(+), 12 deletions(-)
Quoted 3 lines
Ok, it seems I should just go ahead and pick patch 1, and defer the remainder until after we agree on the interface, right?
Yes. I'm currently reworking and testing the reset patch and there's one more patch that'll come into this series, as I found another problem.