Skip to contentSkip to conversation

Cisco vpnclient prevents proper shutdown starting with 2.6.2

DISCUSSION Sid Boyce 1 participant 1 message Feb 7, 2004

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw
Quoted 9 lines · Meinhard E. Mayer

Until version 2.6.1 the Cisco VPN module (version 4.0.3(B)) cisco_ipsec, although "tainted" worked fine with all 2.4.22 and 2.6 kernel versions. However, for 2.6.2, although the module compiles and loads, starting the vpnclient hangs, and the client cannot be stoped (i.e. /etc/init.d/vpnclient_init stop also hangs, and therefore both shutdown and reboot of the computer do not complete, and I was forced to "pull the plug." Fortunately the journaled file system prevented serious damage.

Quoted 6 lines

I used the same .config (which I append) for compiling 2.6, 2.6.1, and 2.6.2, so I assume that something in your networking drivers must have changed to cause this bug.

I would appreciate any suggestions for fixing this problem, since I need VPN to access the University library.

I tried using this client with up to 2.6.1-mm5 and ended up with Dead processes for cvpnd and vpnclient, nothing else was affected, went back to 2.4.x kernel. Regards
Sid

Signature · 2 lines
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.