Cisco vpnclient prevents proper shutdown starting with 2.6.2
Quoted 9 lines · Meinhard E. Mayer
Until version 2.6.1 the Cisco VPN module (version 4.0.3(B))
cisco_ipsec, although "tainted" worked fine with all 2.4.22 and 2.6 kernel versions. However, for 2.6.2, although the module compiles and loads, starting the vpnclient hangs, and the client cannot be stoped (i.e./etc/init.d/vpnclient_initstop also hangs, and therefore both shutdown and reboot of the computer do not complete, and I was forced to "pull the plug." Fortunately the journaled file system prevented serious damage.
Quoted 6 lines
I used the same .config (which I append) for compiling 2.6, 2.6.1, and 2.6.2, so I assume that something in your networking drivers must have changed to cause this bug.
I would appreciate any suggestions for fixing this problem, since I need VPN to access the University library.
I tried using this client with up to 2.6.1-mm5 and ended up with Dead processes for cvpnd and vpnclient, nothing else was affected, went back to 2.4.x kernel. Regards
Sid
Signature · 2 lines
Sid Boyce .... Hamradio G3VBV and keen Flyer Linux Only Shop.