Skip to contentSkip to conversation

How to add ethernet driver for ixp425 board

U-Boot-Users Bernieshu 2 participants 2 messages Feb 12, 2004

lore
Share & tools
lore

Bernieshu

author
#0 lore raw

Hi, all

I need a u-boot running on Intel's ixp425 board with ethernet functionality. But current u-boot version does not have it. I once tried to move part of ixp400AccessLibrary to u-boot. But it seems difficult for me because I am still fresh in both linux and u-boot.

Is it possible to write a ethernet driver for ixp425 similar as realtek or others which are already included in u-boot?

Any help and suggestions will be appreciated.

Regards

#1 lore raw

*if* you can get there, see:
http://sourceforge.net/mailarchive/message.php?msg_id=5541290

since I had a tough time getting there due to sourceforge issues, here's the text:

Quoted 29 lines
Quoted 29 lines

From: Kyle Harris <kharris@ne...>
Re: [PATCH] support for Intel IXP ?
2003-07-15 18:13

Another thing to note about the IXP support is that there is NO
network
support due to license restrictions. Intel has chosen to release
their CSR
libraries under a proprietary license. The CSR libraries provide the
Access
Layer, which is a software interface for accessing the hardware
ports. I'd
had heard rumors that Intel was going to release this code under
GPL, but
that was months ago. So, for now IXP only supports the serial
interface.

Kyle.

Quoted 3 lines · Kyle Harris

Wolfgang,

Please find attached a patch for Intel CPU IXP425 and eval board

IXDP425.

Quoted 1 line

This is applied against 0.4.0 (I tried several times to pull from

CVS but

Quoted 2 lines

failed, and finally gave up).

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Note: This patch does NOT include support for the PCI bridge :(

Regards, Kyle.

basically, there's no legal way to use the Intel access library code within u-boot.

I hate to say this, but if you need the ethernet ports in your bootloader,
you'll probably have to use the 1.92 RedBoot code from Intel (see here:
http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm )

hth,
-mark

Quoted 25 lines · Bernieshu

Hi, all

I need a u-boot running on Intel's ixp425 board with ethernet functionality. But current u-boot version does not have it. I once tried to move part of ixp400AccessLibrary to u-boot. But it seems difficult for me because I am still fresh in both linux and u-boot.

Is it possible to write a ethernet driver for ixp425 similar as realtek or others which are already included in u-boot?

Any help and suggestions will be appreciated.

Regards

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users