How to add ethernet driver for ixp425 board
Hi, all
I need a u-boot running on Intel's ixp425 board with ethernet functionality. But current u-boot version does not have it. I once tried to move part of ixp400AccessLibrary to u-boot. But it seems difficult for me because I am still fresh in both linux and u-boot.
Is it possible to write a ethernet driver for ixp425 similar as realtek or others which are already included in u-boot?
Any help and suggestions will be appreciated.
Regards
*if* you can get there, see:
http://sourceforge.net/mailarchive/message.php?msg_id=5541290
since I had a tough time getting there due to sourceforge issues, here's the text:
Quoted 29 lines
Quoted 29 lines
From: Kyle Harris <kharris@ne...>
Re: [PATCH] support for Intel IXP ?
2003-07-15 18:13Another thing to note about the IXP support is that there is NO
network
support due to license restrictions. Intel has chosen to release
their CSR
libraries under a proprietary license. The CSR libraries provide the
Access
Layer, which is a software interface for accessing the hardware
ports. I'd
had heard rumors that Intel was going to release this code under
GPL, but
that was months ago. So, for now IXP only supports the serial
interface.Kyle.
Quoted 3 lines · Kyle Harris
Wolfgang,
Please find attached a patch for Intel CPU IXP425 and eval board
IXDP425.
Quoted 1 line
This is applied against 0.4.0 (I tried several times to pull from
CVS but
Quoted 2 lines
failed, and finally gave up).
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Note: This patch does NOT include support for the PCI bridge :(
Regards, Kyle.
basically, there's no legal way to use the Intel access library code within u-boot.
I hate to say this, but if you need the ethernet ports in your bootloader,
you'll probably have to use the 1.92 RedBoot code from Intel (see here:
http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm )
hth,
-mark
Quoted 25 lines · Bernieshu
Hi, all
I need a u-boot running on Intel's ixp425 board with ethernet functionality. But current u-boot version does not have it. I once tried to move part of ixp400AccessLibrary to u-boot. But it seems difficult for me because I am still fresh in both linux and u-boot.
Is it possible to write a ethernet driver for ixp425 similar as realtek or others which are already included in u-boot?
Any help and suggestions will be appreciated.
Regards
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users