Strange problem seeing certain websites over dial-up connection
Hi, I would be happy if anyone has a clue about this.
When I use my Slackware 8.1 system with a modem (kernel 2.4.18, I also tried 2.4.24), I cannot access the websites www.amigbg.com and www.viforaldrar.se with any browser. This works on another Linux system (2.4.20-28.8smp, without a modem). I can telnet the hosts, so my location should not be the problem. The problem is that an HTTP request is sent, but no answer is recorded. Both webservers were IIS 5.0 when I checked the other day. I could rip the packets apart in a few weeks to see what I find, but I thought I should post this now.
Some .config lines:CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPPOE=m
And lsmod says:
Module Size Used by Not tainted
ppp_deflate 2968 2 (autoclean) zlib_deflate 17880 0 (autoclean) [ppp_deflate] bsd_comp 3992 0 (autoclean) ppp_async 6560 1 (autoclean) ppp_generic 15872 3 (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc 4656 1 (autoclean) [ppp_generic]
Regards
/Johan Gill <[email protected]>
Quoted 4 lines · Johan Gill
location should not be the problem. The problem is that an HTTP request is sent, but no answer is recorded. Both webservers were IIS 5.0 when I checked the other day. I could rip the packets apart in a few weeks to see what I find, but I thought I should post this now.
There are many possible problems, but without some details, it would be hard to guess. Please include pppd configuration files, debug output from pppd negotiation, "netstat -ni", and, since this sounds like a name service or routing problem rather than a PPP problem, "route -n" and packet traces.
Just to be sure: this is a regular modem and not PPPoE with an ADSL "modem," right?
What MRU do you have configured? At just a wild guess, if it's anything other than the default of 1500, you're likely forcing the access server to do PMTU discovery, and if there's a broken firewall in front of those web servers, you may have trouble reaching them.
Signature · 1 line
James Carlson <[email protected]>
Quoted 11 lines · James Carlson
What MRU do you have configured?
At just a wild guess, if it'sanything other than the default of 1500, you're likely forcing the
access server to do PMTU discovery, and if there's a broken firewall in front of those web servers, you may have trouble reaching them.
What do you know...it was way too low, my dial script messed it up. Thank you!
/Johan Gill <[email protected]>