Skip to contentSkip to conversation

Strange problem seeing certain websites over dial-up connection

DISCUSSION Johan Gill 2 participants 3 messages Mar 4, 2004 PPP protocol drivers and compressors

lore
Share & tools
lore

Johan Gill

author
#0 lore raw

Hi, I would be happy if anyone has a clue about this.

When I use my Slackware 8.1 system with a modem (kernel 2.4.18, I also tried 2.4.24), I cannot access the websites www.amigbg.com and www.viforaldrar.se with any browser. This works on another Linux system (2.4.20-28.8smp, without a modem). I can telnet the hosts, so my location should not be the problem. The problem is that an HTTP request is sent, but no answer is recorded. Both webservers were IIS 5.0 when I checked the other day. I could rip the packets apart in a few weeks to see what I find, but I thought I should post this now.

Some .config lines:
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m

And lsmod says:
Module Size Used by Not tainted

ppp_deflate             2968   2  (autoclean)
zlib_deflate           17880   0  (autoclean) [ppp_deflate]
bsd_comp                3992   0  (autoclean)
ppp_async               6560   1  (autoclean)
ppp_generic            15872   3  (autoclean) [ppp_deflate bsd_comp 

ppp_async]
slhc 4656 1 (autoclean) [ppp_generic]

Regards
/Johan Gill <[email protected]>

#1 lore raw
Quoted 4 lines · Johan Gill

location should not be the problem. The problem is that an HTTP request is sent, but no answer is recorded. Both webservers were IIS 5.0 when I checked the other day. I could rip the packets apart in a few weeks to see what I find, but I thought I should post this now.

There are many possible problems, but without some details, it would be hard to guess. Please include pppd configuration files, debug output from pppd negotiation, "netstat -ni", and, since this sounds like a name service or routing problem rather than a PPP problem, "route -n" and packet traces.

Just to be sure: this is a regular modem and not PPPoE with an ADSL "modem," right?

What MRU do you have configured? At just a wild guess, if it's anything other than the default of 1500, you're likely forcing the access server to do PMTU discovery, and if there's a broken firewall in front of those web servers, you may have trouble reaching them.

Signature · 1 line
James Carlson                                  <[email protected]>
author
#2 lore raw
In reply to Johan Gill
Quoted 11 lines · James Carlson

What MRU do you have configured?

At just a wild guess, if it'sanything other than the default of 1500, you're likely forcing the

access server to do PMTU discovery, and if there's a broken firewall in front of those web servers, you may have trouble reaching them.

What do you know...it was way too low, my dial script messed it up. Thank you!

/Johan Gill <[email protected]>