Hamlib: PTT Broken for Icom IC-746
I have an Icom IC-746 connected to my linux box through a level converter. I have the latest hamlib (1.2.4) all setup, and most of the functions work. The only qualm I have is that it will not trigger the PTT on. There is a CI-V command on the serial bus to do it, but I get the error: "set_ptt: error = Feature not available"
I'm not much for C, so I can't really find where this would be implemented. Does anyone have any ideas?
Cheers,
Jonathan Lassoff (KG6THI)
Quoted 8 lines
I have an Icom IC-746 connected to my linux box through a level converter. I have the latest hamlib (1.2.4) all setup, and most of the functions work. The only qualm I have is that it will not trigger the PTT on. There is a CI-V command on the serial bus to do it, but I get the error: "
set_ptt: error = Feature not available"
I'm not much for C, so I can't really find where this would be implemented. Does anyone have any ideas?
A bit more information would be nice:
start using rigctl with verbose flags:
rigctl -vvvvv -m 323
Next, type 'T' and '1', which sets PTT.
Send the output to the hamlib-developer mailing list.
Quoted 2 lines
Cheers,
Jonathan Lassoff (KG6THI)
Joop PG4I