Skip to contentSkip to conversation

Hamlib: PTT Broken for Icom IC-746

DISCUSSION Jonathan Lassoff 2 participants 2 messages Jul 28, 2005 – Jul 29, 2005

lore
Share & tools
lore
#0 lore raw

I have an Icom IC-746 connected to my linux box through a level converter. I have the latest hamlib (1.2.4) all setup, and most of the functions work. The only qualm I have is that it will not trigger the PTT on. There is a CI-V command on the serial bus to do it, but I get the error: "set_ptt: error = Feature not available"
I'm not much for C, so I can't really find where this would be implemented. Does anyone have any ideas?

Cheers,
Jonathan Lassoff (KG6THI)

#1 lore raw
Quoted 8 lines

I have an Icom IC-746 connected to my linux box through a level converter. I have the latest hamlib (1.2.4) all setup, and most of the functions work. The only qualm I have is that it will not trigger the PTT on. There is a CI-V command on the serial bus to do it, but I get the error: "set_ptt: error = Feature not available"
I'm not much for C, so I can't really find where this would be implemented. Does anyone have any ideas?

A bit more information would be nice:

start using rigctl with verbose flags:

rigctl -vvvvv -m 323

Next, type 'T' and '1', which sets PTT.
Send the output to the hamlib-developer mailing list.

Quoted 2 lines

Cheers,
Jonathan Lassoff (KG6THI)

Joop PG4I