Envy24HT mixer restore problem with M-Audio Revolution 7.1 + Alsa 1.0.4
Hi there,
I've got an Envy24HT based M-Audio Revolution 7.1 and have a issue with Alsa 1.0.4.
When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.
I didn't notice this a few revisions back, so I think a bug crept in recently ..
Thanks,
Steve
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Interesting. I 'll see what I can do since I have a pretty similar card (Audiotrak Prodigy 7.1).
Can you try changing the line:
change = (ovol != nvol);
to
change = 1;
in file aureon.c (in alsa-kernel directory) functions wm_dac_vol_put & wm_adc_vol_put (the first one should really be enough in your case). You could also try to see if the problem persists after unloading and reloading the snd-ice1724 module to avoid rebooting.
Apostolos
Quoted 11 lines · Stephen Hassard
Hi there,
I've got an Envy24HT based M-Audio Revolution 7.1 and have a issue with Alsa 1.0.4.
When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.
I didn't notice this a few revisions back, so I think a bug crept in recently ..
Thanks,
Steve
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Hello Stephen,
Quoted 1 line · Stephen Hassard
When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.
I have the exact same problem with a TerraTec EWX 24/96 (ice1712 AKA not HT Envy24), though on the right channel. In my case this is a long lasting quirk (easy to solve with a simple amixer call), cause it's there since at least 0.9.0. I also checked the driver code sometimes sgo but haven't been able to find any problem in the code.
Bye,
--
Denis Sbragion InfoTecna Tel: +39 0362 805396, Fax: +39 0362 805404 URL: http://www.infotecna.it
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click