Skip to contentSkip to conversation

Envy24HT mixer restore problem with M-Audio Revolution 7.1 + Alsa 1.0.4

DISCUSSION Stephen Hassard 3 participants 3 messages Apr 13, 2004 – Apr 15, 2004

lore
Share & tools
lore
#0 lore raw

Hi there,

I've got an Envy24HT based M-Audio Revolution 7.1 and have a issue with Alsa 1.0.4.

When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.

I didn't notice this a few revisions back, so I think a bug crept in recently ..

Thanks,
Steve

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

#1 lore raw

Interesting. I 'll see what I can do since I have a pretty similar card (Audiotrak Prodigy 7.1).

Can you try changing the line:
change = (ovol != nvol);
to
change = 1;

in file aureon.c (in alsa-kernel directory) functions wm_dac_vol_put & wm_adc_vol_put (the first one should really be enough in your case). You could also try to see if the problem persists after unloading and reloading the snd-ice1724 module to avoid rebooting.

Apostolos

Quoted 11 lines · Stephen Hassard

Hi there,

I've got an Envy24HT based M-Audio Revolution 7.1 and have a issue with Alsa 1.0.4.

When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.

I didn't notice this a few revisions back, so I think a bug crept in recently ..

Thanks,
Steve

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

#2 lore raw
In reply to Stephen Hassard

Hello Stephen,

Quoted 1 line · Stephen Hassard

When I set my 'DAC' and 'DAC1' channels to sane values (they correspond to L+R audio) and save my mixer settings via 'alsactl store', reboot and restore the settings via 'alsactl restore', my mixer settings appear to be normal in alsamixer, but I find that my left channel ('DAC') is mutted until I change the volume of 'DAC'. As soon as I touch the mixer for the 'DAC' channel, audio output is restored.

I have the exact same problem with a TerraTec EWX 24/96 (ice1712 AKA not HT Envy24), though on the right channel. In my case this is a long lasting quirk (easy to solve with a simple amixer call), cause it's there since at least 0.9.0. I also checked the driver code sometimes sgo but haven't been able to find any problem in the code.

Bye,
--

	Denis Sbragion
	InfoTecna
	Tel: +39 0362 805396, Fax: +39 0362 805404
	URL: http://www.infotecna.it

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click