hdc: lost interrupt ide-cd: cmd 0x3 timed out with 2.6.6-rc3-bk8
Hi. I recently built 2.6.6-rc3-bk8. The boot process stalls with
ide-cd: cmd 0x5a timed out
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
ide-cd: cmd 0x3 timed out
...
There are no problems booting 2.6.6-rc3-bk6.
My system: FC2-test3.
When booting from 2.6.6-rc3-bk6, I get the following:
(from cat /proc/ioports)
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1080-109f : 0000:00:02.1
e000-e0ff : 0000:00:03.0
e000-e0ff : sis900
e400-e41f : 0000:00:09.0
e400-e41f : EMU10K1
e800-e807 : 0000:00:09.1
ec00-ec7f : 0000:00:0d.0
f000-f00f : 0000:00:02.5
f000-f007 : ide0
f008-f00f : ide1
from /proc/interrupts:
CPU0
0: 1580849 XT-PIC timer 1: 4012 XT-PIC i8042 2: 0 XT-PIC cascade 5: 6 XT-PIC bttv0 9: 9680 XT-PIC acpi, EMU10K1, ohci1394 10: 114470 XT-PIC ohci_hcd, nvidia 11: 562 XT-PIC ohci_hcd, eth0 12: 39542 XT-PIC i8042 14: 19181 XT-PIC ide0 15: 21677 XT-PIC ide1 NMI: 0 LOC: 1580793 ERR: 0 MIS: 0
I didn't see anything in /Documentation. Besides running FC2-t3 (updated with yum), I have /sys and /udev (hotplug from 2004_04_01 and udev-025) installed. On my system /dev/hdc is a Sony DVD drive, and is not /boot or /.
I can still boot 2.6.6-rc3-bk6 without problems. Please email me for more information as I'm not on the list.
TIA,
Bob
zero IDE changes in bk6 -> bk8 but a lot of ACPI / IRQ related
Quoted 9 lines · Bob Gill
Hi. I recently built 2.6.6-rc3-bk8. The boot process stalls with
ide-cd: cmd0x5atimed out
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
ide-cd: cmd0x3timed out
...
There are no problems booting 2.6.6-rc3-bk6.
Quoted 7 lines · Bob Gill
Hi. I recently built 2.6.6-rc3-bk8. The boot process stalls with ide-cd: cmd
0x5atimed out
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
hdc: lost interrupt.
ide-cd: cmd0x3timed out
...
Same thing here with a SiS 962/963 and Linux 2.6.6. 2.6.5 was working just fine.
Also the acpi=noirq workaround works for me as well.
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
SiS 962/963 MuTIOL IDE UDMA133 controller