us-122 firwareloader
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi all,
I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(
On the other linux, I can't get firmwareloader working...
Is someone know some tips in order to find the clue ? :)
Thanks
Jo
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
Quoted 6 lines · JoDaY
Hi all,
I've 2 install of linux, the first one is the oldest where hotplug is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(
Sounds like you are using the old tascam-loader instead of usx2yloader. Have you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?
Quoted 2 lines
On the other linux, I can't get firmwareloader working...
Where does it hang? Do you already have a renumbered ID? It changes from 8006 to 8007. Check that number with lsusb. Everything installed?
- fxload
- hotplug scripts
- alsa-tools/usx2yloader
- alsa-firmware/usx2yloader
Any output in the logfiles?
martin
Signature · 9 lines
Living on earth may be expensive,
but it includes an annual free trip around the sun.
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=clickQuoted 4 lines · Martin Langer
Quoted 2 lines · JoDaY
Hi all,
Quoted 8 lines
Quoted 3 lines
I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(Sounds like you are using the old tascam-loader instead of usx2yloader. Have you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?
You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version.
I've tried to change it with alsa-tools and alsa-firmware:
- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusb
But the usb LED is always off :(
I can also see :
[USX2Y ]: USB US-X2Y - TASCAM US-X2Y
TASCAM US-X2Y (1604:8007 if 0 at 002/008)
in /proc/asound/card
Is the LED off normal ? Am I near of the goal ? :)
Thanks you lot !
Jo
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
Quoted 19 lines · JoDaY
Quoted 10 lines · Martin Langer
Quoted 6 lines · JoDaY
Hi all,
I've 2 install of linux, the first one is the oldest where hotplug is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(Quoted 4 lines
Sounds like you are using the old tascam-loader instead of usx2yloader. Have
you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version.
Quoted 7 lines
I've tried to change it with alsa-tools and alsa-firmware:
- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusbBut the usb LED is always off :(
It's still the tascam loader! Check your hotplug configuration. The file
"tascam_fpga" you're using isn't the one by usx2yloader. You can remove the old tascam-loader stuff there. The file "tascam_fpga" from tascam-loader was different and it's no longer compatible with ALSA from today.
Quoted 1 line
Is the LED off normal ?
It goes 'ON' after the second firmware upload. tascam_fpga in the hotplug directory starts usx2yloader for this job.
martin
Signature · 9 lines
Living on earth may be expensive,
but it includes an annual free trip around the sun.
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click