Skip to contentSkip to conversation

us-122 firwareloader

DISCUSSION JoDaY 2 participants 4 messages May 31, 2004 – Jun 1, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

JoDaY

author
#1 lore raw

Hi all,

I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(

On the other linux, I can't get firmwareloader working...

Is someone know some tips in order to find the clue ? :)

Thanks

Jo

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#2 lore raw
Quoted 6 lines · JoDaY

Hi all,

I've 2 install of linux, the first one is the oldest where hotplug is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(

Sounds like you are using the old tascam-loader instead of usx2yloader. Have you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?

Quoted 2 lines

On the other linux, I can't get firmwareloader working...

Where does it hang? Do you already have a renumbered ID? It changes from 8006 to 8007. Check that number with lsusb. Everything installed?
- fxload
- hotplug scripts
- alsa-tools/usx2yloader
- alsa-firmware/usx2yloader

Any output in the logfiles?

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
author
#3 lore raw
Quoted 4 lines · Martin Langer
Quoted 2 lines · JoDaY

Hi all,

Quoted 8 lines
Quoted 3 lines

I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(

Sounds like you are using the old tascam-loader instead of usx2yloader. Have you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?

You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version.

I've tried to change it with alsa-tools and alsa-firmware:

- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusb

But the usb LED is always off :(

I can also see :
[USX2Y ]: USB US-X2Y - TASCAM US-X2Y

                     TASCAM US-X2Y (1604:8007 if 0 at 002/008)

in /proc/asound/card

Is the LED off normal ? Am I near of the goal ? :)

Thanks you lot !

Jo

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#4 lore raw
Quoted 19 lines · JoDaY
Quoted 10 lines · Martin Langer
Quoted 6 lines · JoDaY

Hi all,

I've 2 install of linux, the first one is the oldest where hotplug is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(

Quoted 4 lines

Sounds like you are using the old tascam-loader instead of usx2yloader. Have
you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?

You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version.

Quoted 7 lines

I've tried to change it with alsa-tools and alsa-firmware:

- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusb

But the usb LED is always off :(

It's still the tascam loader! Check your hotplug configuration. The file
"tascam_fpga" you're using isn't the one by usx2yloader. You can remove the old tascam-loader stuff there. The file "tascam_fpga" from tascam-loader was different and it's no longer compatible with ALSA from today.

Quoted 1 line

Is the LED off normal ?

It goes 'ON' after the second firmware upload. tascam_fpga in the hotplug directory starts usx2yloader for this job.

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click