Skip to contentSkip to conversation

What determines DROP versus delay ("BACKLOG")?

LARTC gypsy 3 participants 3 messages Nov 6, 2004 – Nov 14, 2004

lore
Share & tools
lore

gypsy

author
#0 lore raw

HTB:

class htb 1:40 parent 1:1 leaf 40: prio 3 rate 358Kbit ceil 529Kbit \
burst 6Kb cburst 2260b
Sent 145871726 bytes 97293 pkts (dropped 69, overlimits 0) rate 56741bit 37pps backlog 23p
lended: 77429 borrowed: 19841 giants: 0

I would like to increase "backlog" because I think that would decrease "dropped". 23 packets of 1500 bytes each is only 34,500 bytes. IMO, there could be up to 64K bytes.

1) What determines backlog?
2) How can it be altered?
3) Am I on the right track here?

gypsy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · gypsy

HTB:

class htb 1:40 parent 1:1 leaf 40: prio 3 rate 358Kbit ceil 529Kbit \
burst 6Kb cburst 2260b
Sent 145871726 bytes 97293 pkts (dropped 69, overlimits 0) rate 56741bit 37pps backlog 23p
lended: 77429 borrowed: 19841 giants: 0

Quoted 5 lines

I would like to increase "backlog" because I think that would decrease "dropped". 23 packets of 1500 bytes each is only 34,500 bytes. IMO, there could be up to 64K bytes.

1) What determines backlog?

I'm not sure, but backlog means packets i nthe queue ready to send. You need backlog so htb can work. Backlogs means there are enough packets for htb to work.

Quoted 1 line

2) How can it be altered?

I't can't.

Quoted 1 line

3) Am I on the right track here?

I'm afraid not.

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to gypsy
Quoted 8 lines · gypsy

HTB:

class htb 1:40 parent 1:1 leaf 40: prio 3 rate 358Kbit ceil 529Kbit \
burst 6Kb cburst 2260b
Sent 145871726 bytes 97293 pkts (dropped 69, overlimits 0) rate 56741bit 37pps backlog 23p
lended: 77429 borrowed: 19841 giants: 0

Quoted 6 lines

I would like to increase "backlog" because I think that would decrease "dropped". 23 packets of 1500 bytes each is only 34,500 bytes. IMO, there could be up to 64K bytes.

1) What determines backlog?
2) How can it be altered?

If you add a queue say bfifo - you can choose the length.

Quoted 7 lines

3) Am I on the right track here?

gypsy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/