-nostdinc
Hello,
Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.
I've noticed that -nostdinc is used for many of the compiles. When I attempted to include stdlib.h and atoi() in our application, the compiler could not find the file.
Further examination of the U-Boot code-base shows little or no use of stdlib.h. Is this to keep the overall binary size to a minimum?
Any other reason for not adding this library to build? One simple alternative is to include our own atoi() source code.
Thanks and best regards, Andrew
Quoted 4 lines · In message <[email protected]> you wrote:
Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.
Congrats :-)
Quoted 1 line
I've noticed that -nostdinc is used for many of the compiles. When I
It should be used for _all_ compiles of files that get linked into the U-Boot image. Please point out if we're missing any (of course it is NOT used for any tools that will run on the host system, like mkimage etc.).
Quoted 2 lines
attempted to include
stdlib.handatoi()in our application, the compiler could not find the file.
That's a good thing as it prevented you to do a stupind thing ;-)
Quoted 2 lines
Further examination of the U-Boot code-base shows little or no use of
stdlib.h. Is this to keep the overall binary size to a minimum?
It is to make U-Boot self-contained, i. e. independent of any external libraries etc.
Quoted 1 line
Any other reason for not adding this library to build? One simple
Yes. You don;t need it.
Quoted 1 line
alternative is to include our own
atoi()source code.
Don't reinvent the wheel. Don't bloat the code by multiple implemen- tations of the same function. Use simple_strtoul() instead.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de About the use of language: it is impossible to sharpen a pencil with a blunt ax. It is equally vain to try to do it with ten blunt axes instead. -- Edsger Dijkstra
Thanks for the kind reply.
Quoted 6 lines · Wolfgang Denk
Quoted 3 lines · In message <[email protected]> you wrote:
Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.
Quoted 8 lines
Congrats :-)
Quoted 1 line
I've noticed that -nostdinc is used for many of the compiles. When I
It should be used for _all_ compiles of files that get linked into the U-Boot image. Please point out if we're missing any (of course it is NOT used for any tools that will run on the host system, like mkimage etc.).
I haven't seen any yet.
Quoted 10 lines
Quoted 2 lines
attempted to include
stdlib.handatoi()in our application, the compiler could not find the file.That's a good thing as it prevented you to do a stupind thing ;-)
Quoted 2 lines
Further examination of the U-Boot code-base shows little or no use of
stdlib.h. Is this to keep the overall binary size to a minimum?It is to make U-Boot self-contained, i. e. independent of any external libraries etc.
That's a good thing.
Quoted 8 lines
Quoted 1 line
Any other reason for not adding this library to build? One simple
Yes. You don;t need it.
Quoted 1 line
alternative is to include our own
atoi()source code.Don't reinvent the wheel. Don't bloat the code by multiple implemen- tations of the same function. Use
simple_strtoul()instead.
Ahhh, I was wondering how U-Boot handled this common task. I didn't look far enough.
Quoted 4 lines
Best regards,
Wolfgang Denk