Skip to contentSkip to conversation

-nostdinc

U-Boot-Users Andrew Wozniak 2 participants 3 messages Mar 9, 2005

lore
Share & tools
lore
#0 lore raw

Hello,

Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.

I've noticed that -nostdinc is used for many of the compiles. When I attempted to include stdlib.h and atoi() in our application, the compiler could not find the file.

Further examination of the U-Boot code-base shows little or no use of stdlib.h. Is this to keep the overall binary size to a minimum?

Any other reason for not adding this library to build? One simple alternative is to include our own atoi() source code.

Thanks and best regards, Andrew

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.

Congrats :-)

Quoted 1 line

I've noticed that -nostdinc is used for many of the compiles. When I

It should be used for _all_ compiles of files that get linked into the U-Boot image. Please point out if we're missing any (of course it is NOT used for any tools that will run on the host system, like mkimage etc.).

Quoted 2 lines

attempted to include stdlib.h and atoi() in our application, the compiler could not find the file.

That's a good thing as it prevented you to do a stupind thing ;-)

Quoted 2 lines

Further examination of the U-Boot code-base shows little or no use of stdlib.h. Is this to keep the overall binary size to a minimum?

It is to make U-Boot self-contained, i. e. independent of any external libraries etc.

Quoted 1 line

Any other reason for not adding this library to build? One simple

Yes. You don;t need it.

Quoted 1 line

alternative is to include our own atoi() source code.

Don't reinvent the wheel. Don't bloat the code by multiple implemen- tations of the same function. Use simple_strtoul() instead.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
About the use of language: it is impossible to sharpen a pencil  with
a  blunt  ax.  It is equally vain to try to do it with ten blunt axes
instead.                                           -- Edsger Dijkstra
#2 lore raw

Thanks for the kind reply.

Quoted 6 lines · Wolfgang Denk
Quoted 3 lines · In message <[email protected]> you wrote:

Having lots of fun with U-boot on our custom PPC440GX board. We're also pretty far along on developing a loadable "u-boot application" for this board.

Quoted 8 lines

Congrats :-)

Quoted 1 line

I've noticed that -nostdinc is used for many of the compiles. When I

It should be used for _all_ compiles of files that get linked into the U-Boot image. Please point out if we're missing any (of course it is NOT used for any tools that will run on the host system, like mkimage etc.).

I haven't seen any yet.

Quoted 10 lines
Quoted 2 lines

attempted to include stdlib.h and atoi() in our application, the compiler could not find the file.

That's a good thing as it prevented you to do a stupind thing ;-)

Quoted 2 lines

Further examination of the U-Boot code-base shows little or no use of stdlib.h. Is this to keep the overall binary size to a minimum?

It is to make U-Boot self-contained, i. e. independent of any external libraries etc.

That's a good thing.

Quoted 8 lines
Quoted 1 line

Any other reason for not adding this library to build? One simple

Yes. You don;t need it.

Quoted 1 line

alternative is to include our own atoi() source code.

Don't reinvent the wheel. Don't bloat the code by multiple implemen- tations of the same function. Use simple_strtoul() instead.

Ahhh, I was wondering how U-Boot handled this common task. I didn't look far enough.

Quoted 4 lines

Best regards,

Wolfgang Denk