Multiple vector domain support - stop hardware

RFC PATCH In review Kenji Kaneshige 1 participant 1 message Jul 14, 2005

lore

Share & tools

lore

Kenji Kaneshige

author

2005-07-14 09:34 UTC #0 lore raw

RFC PATCH 8/10 Multiple vector domain support - stop hardware

This patch is to stop hardware interrupt redirection.

TBD: We might not ought to stop hardware interrupt redirection for systems that interrupts are redirected on each node. That is, we might be able to use hardware redirection on each vector domain if it doesn't redirect interrupts to other domain.

Signed-off-by Kenji Kaneshige <[email protected]>

---

 linux-2.6.13-rc1-kanesige/arch/ia64/kernel/iosapic.c |   22 +++++++++++++++----
 linux-2.6.13-rc1-kanesige/arch/ia64/kernel/sal.c     |    2 -
 2 files changed, 19 insertions(+), 5 deletions(-)

arch/ia64/kernel/iosapic.c renamed from arch/ia64/kernel/iosapic.c~vector-domain-ia64-stop-hw-interrupt-redirection +18 -4

diff -puN arch/ia64/kernel/iosapic.c~vector-domain-ia64-stop-hw-interrupt-redirection arch/ia64/kernel/iosapic.c
@@ -318,7 +318,8 @@ iosapic_set_affinity (unsigned int irq, 
 	u32 high32, low32;
 	int cpu, dest, rte_index, gsv;
 	char __iomem *addr;
-	int redir = (irq & IA64_IRQ_REDIRECTED) ? 1 : 0;
+	int redir = ((smp_int_redirect & SMP_IRQ_REDIRECTION) &&
+		     (irq & IA64_IRQ_REDIRECTED)) ? 1 : 0;
 	struct iosapic_rte_info *rte;
 
 	irq &= (~IA64_IRQ_REDIRECTED);

@@ -792,6 +793,7 @@ iosapic_register_intr (unsigned int gsi,
 	struct iosapic_rte_info *rte;
 	u32 low32;
 	irq_desc_t *idesc;
+	unsigned char dmode;
 again:
 	/*
 	 * If this GSI has already been registered (i.e., it's a

@@ -832,8 +834,12 @@ again:
 		}
 
 		dest = get_target_cpu(gsi, gsv);
-		register_intr(gsi, gsv, IOSAPIC_LOWEST_PRIORITY,
-			      polarity, trigger);
+		if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+			dmode = IOSAPIC_LOWEST_PRIORITY;
+		else
+			dmode = IOSAPIC_FIXED;
+
+		register_intr(gsi, gsv, dmode, polarity, trigger);
 
 		/*
 		 * If the vector is shared and already unmasked for

@@ -971,7 +977,10 @@ iosapic_register_platform_intr (u32 int_
 		break;
 	      case ACPI_INTERRUPT_CPEI:
 		gsv = domain_vector_to_gsv(domain, IA64_CPE_VECTOR);
-		delivery = IOSAPIC_LOWEST_PRIORITY;
+		if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+			delivery = IOSAPIC_LOWEST_PRIORITY;
+		else
+			delivery = IOSAPIC_FIXED;
 		mask = 1;
 		break;
 	      default:

@@ -1005,9 +1014,14 @@ iosapic_override_isa_irq (unsigned int i
 	unsigned int gsv;
 	unsigned int dest = cpu_physical_id(smp_processor_id());
 	unsigned int domain = ia64_cpu_to_domain(smp_processor_id());
+	unsigned char dmode;
 
 	vector = isa_irq_to_vector(isa_irq);
 	gsv = domain_vector_to_gsv(domain, vector);
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		dmode = IOSAPIC_LOWEST_PRIORITY;
+	else
+		dmode = IOSAPIC_FIXED;
 
 	register_intr(gsi, gsv, IOSAPIC_LOWEST_PRIORITY, polarity, trigger);

arch/ia64/kernel/sal.c renamed from arch/ia64/kernel/sal.c~vector-domain-ia64-stop-hw-interrupt-redirection +1 -1

diff -puN arch/ia64/kernel/sal.c~vector-domain-ia64-stop-hw-interrupt-redirection arch/ia64/kernel/sal.c
@@ -123,7 +123,7 @@ sal_desc_entry_point (void *p)
 static void __init
 set_smp_redirect (int flag)
 {
-#ifndef CONFIG_HOTPLUG_CPU
+#if (!CONFIG_HOTPLUG_CPU && !CONFIG_VECTOR_DOMAIN)
 	if (no_int_routing)
 		smp_int_redirect &= ~flag;
 	else