maudio audiophile 24/96
I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.
Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a maudio audiophile 24/96 from newegg to get a clean dac.
But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).
kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.
I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.
THANKS
Quoted 5 lines · Heitzso
I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.
Quoted 7 lines
Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a
maudio audiophile 24/96 from newegg to get a clean dac. But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).
I don't see an answer, so I'll note that I have done many tapes and records by using "rec" from the "sox" package, using CD sampling rates, and saving each side of a tape or record to a single wav file. Then I use "audacity" to find and split off each track, do any required processing, always normalize the volume, and save.
At that point I can use lame for mp2, create ogg files, write .inf files to burn CD (usually won't fit), and I personally run shorten on the original wav files (lossless compression) and save them to DVD in batches.
My experience has been that I am able to get most pleasing results doing the best rip I can without mixing, then editing the output as needed, and being able to go back to the first rip if I don't like the ouput, or find a better tool.
Quoted 15 lines
kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.
I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.
THANKS
-
To unsubscribe from this list: send the line "unsubscribe linux-sound" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
bill davidsen <[email protected]> CTO TMR Associates, Inc Doing interesting things with small computers since 1979
envy24control was the solution to my problem. It allows
reasonable control of my 24/96 audiophile card. I'm
recording straight into audacity and cleaning the individual tracks from there.
Thanks
Quoted 49 lines
Quoted 6 lines
I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.
Quoted 7 lines
Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a
maudio audiophile 24/96 from newegg to get a clean dac. But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).I don't see an answer, so I'll note that I have done many tapes and records by using "rec" from the "sox" package, using CD sampling rates, and saving each side of a tape or record to a single wav file. Then I use "audacity" to find and split off each track, do any required processing, always normalize the volume, and save.
At that point I can use lame for mp2, create ogg files, write .inf files to burn CD (usually won't fit), and I personally run shorten on the original wav files (lossless compression) and save them to DVD in batches.
My experience has been that I am able to get most pleasing results doing the best rip I can without mixing, then editing the output as needed, and being able to go back to the first rip if I don't like the ouput, or find a better tool.
Quoted 16 lines
kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.
I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.
THANKS
-
To unsubscribe from this list: send the line "unsubscribe linux-sound" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html