Skip to contentSkip to conversation

maudio audiophile 24/96

DISCUSSION Heitzso 2 participants 3 messages Feb 4, 2006 – Mar 3, 2006 Sound

lore
Share & tools
lore

Heitzso

author
#0 lore raw

I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.

Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a maudio audiophile 24/96 from newegg to get a clean dac.

But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).

kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.

I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.

THANKS

#1 lore raw
Quoted 5 lines · Heitzso

I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.

Quoted 7 lines

Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a
maudio audiophile 24/96 from newegg to get a clean dac. But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).

I don't see an answer, so I'll note that I have done many tapes and records by using "rec" from the "sox" package, using CD sampling rates, and saving each side of a tape or record to a single wav file. Then I use "audacity" to find and split off each track, do any required processing, always normalize the volume, and save.

At that point I can use lame for mp2, create ogg files, write .inf files to burn CD (usually won't fit), and I personally run shorten on the original wav files (lossless compression) and save them to DVD in batches.

My experience has been that I am able to get most pleasing results doing the best rip I can without mixing, then editing the output as needed, and being able to go back to the first rip if I don't like the ouput, or find a better tool.

Quoted 15 lines

kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.

I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.
THANKS
-
To unsubscribe from this list: send the line "unsubscribe linux-sound" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 3 lines
bill davidsen <[email protected]>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979
author
#2 lore raw
In reply to Heitzso

envy24control was the solution to my problem. It allows
reasonable control of my 24/96 audiophile card. I'm
recording straight into audacity and cleaning the individual tracks from there.

Thanks

Quoted 49 lines
Quoted 6 lines

I'm trying to convert my collection of cassette tapes over to CDs. I purchased two nice used tape decks off ebay. The nicer of the two is connected to my computer, which is a recent model athlon64 3000+ w/ 1G RAM.

Quoted 7 lines

Sound was very rough captured with 'arecord' through the computer's built in sound chip so I bought a
maudio audiophile 24/96 from newegg to get a clean dac. But my common Linux mixers don't know what to do with the maudio and I feel I may have purchased a fancier audio card than I know what to do with (most mixers certainly don't know what to do with it).

I don't see an answer, so I'll note that I have done many tapes and records by using "rec" from the "sox" package, using CD sampling rates, and saving each side of a tape or record to a single wav file. Then I use "audacity" to find and split off each track, do any required processing, always normalize the volume, and save.

At that point I can use lame for mp2, create ogg files, write .inf files to burn CD (usually won't fit), and I personally run shorten on the original wav files (lossless compression) and save them to DVD in batches.

My experience has been that I am able to get most pleasing results doing the best rip I can without mixing, then editing the output as needed, and being able to go back to the first rip if I don't like the ouput, or find a better tool.

Quoted 16 lines

kmix does a reasonable job of picking up and labeling the inputs/outputs/controls. But I don't know how to use them.

I'd appreciate being pointed to:
email list
forum/irc
doc url
that might help me out.
THANKS
-
To unsubscribe from this list: send the line "unsubscribe linux-sound" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html