ibook1 hangs during boot, atyfb broken
My iBook1 did not work with recent kernels (2.6.15+), 2.6.13 was always ok. Today I did some more testing, with 2.6.16-rc4-git3.
If I boot with 'quiet panic=1 root=/dev/blah', it will hang in 75% of the boots before displaying the penguin.
Adding video=atyfb:off did fix it, tried it a few times. Then I removed the quiet and video= option, and it did boot again. Then I reverted the atyfb to 2.6.15 status and did a reboot loop.
Unfortunately, after 13 reboots with just 'panic=1 root=/x' it was stuck, aftertime_init: processor frequency = 300MHz.
"panic=1 root=/dev/blah video=atyfb:off" works better, 27 reboots and still going.
Quoted 9 lines · Olaf Hering
My iBook1 did not work with recent kernels (2.6.15+), 2.6.13 was always ok. Today I did some more testing, with 2.6.16-rc4-git3.
If I boot with 'quiet panic=1 root=/dev/blah', it will hang in 75% of the boots before displaying the penguin.
Adding video=atyfb:off did fix it, tried it a few times. Then I removed the quiet and video= option, and it did boot again. Then I reverted the atyfb to 2.6.15 status and did a reboot loop.
Unfortunately, after 13 reboots with just 'panic=1 root=/x' it was stuck, aftertime_init: processor frequency = 300MHz.
It boots with video=atyfb:noaccel ?
I suggest you report that to the linux-fbdev mailing list. That problem seems to happen with some wallstreet powerbooks too, there is definitely something broken there...
Ben.
Benjamin Herrenschmidt kirjoitti:
Quoted 11 lines · Olaf Hering
Quoted 8 lines
My iBook1 did not work with recent kernels (2.6.15+), 2.6.13 was always ok.
Today I did some more testing, with 2.6.16-rc4-git3.
If I boot with 'quiet panic=1 root=/dev/blah', it will hang in 75% of the boots before displaying the penguin. Adding video=atyfb:off did fix it, tried it a few times. Then I removed
the quiet and video= option, and it did boot again. Then I reverted the
atyfb to 2.6.15 status and did a reboot loop.
Unfortunately, after 13 reboots with just 'panic=1 root=/x' it was stuck, aftertime_init: processor frequency = 300MHz.
Quoted 5 lines
It boots with video=atyfb:noaccel ?
I suggest you report that to the linux-fbdev mailing list. That problem seems to happen with some wallstreet powerbooks too, there is definitely something broken there...
Using an older DVI TiBook, atyfb has been broken at least since 2.6.8 or so, and still is with 2.6.15, in that it can't seem to synchronize with the LCD and maybe 50% of the (re-)boots produce just more-or-less shimmering/flashing garbage on screen. Doesn't completely hang though...
-- Heikki Lindholm
Quoted 1 line · Heikki Lindholm
Using an older DVI TiBook, atyfb has been broken at least since 2.6.8 or
atyfb vs. aty128fb.
Quoted 5 lines
Using an older DVI TiBook, atyfb has been broken at least since 2.6.8 or so, and still is with 2.6.15, in that it can't seem to synchronize with the LCD and maybe 50% of the (re-)boots produce just more-or-less shimmering/flashing garbage on screen. Doesn't completely hang though...
Except that no tibook ever used atyfb...
Ben.
Benjamin Herrenschmidt kirjoitti:
Quoted 4 lines
Quoted 1 line
Using an older DVI TiBook, atyfb has been broken at least since 2.6.8 or so, and still is with 2.6.15, in that it can't seem to synchronize with the LCD and maybe 50% of the (re-)boots produce just more-or-less shimmering/flashing garbage on screen. Doesn't completely hang though...
Except that no tibook ever used atyfb...
Damn straight! I stand corrected (confused with one PC laptop), it's the radeon thing then..
-- Heikki Lindholm