Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding
Subsystems (2)
PATCH 1/4 Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding
From: Sean Wang <[email protected]>
Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done.
--- drivers/bluetooth/btusb.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)
drivers/bluetooth/btusb.c +18 -14
@@ -2318,8 +2318,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)#define MTK_EP_RST_OPT 0x74011890#define MTK_EP_RST_IN_OUT_OPT 0x00010001#define MTK_BT_RST_DONE 0x00000100 -#define MTK_BT_RESET_WAIT_MS 100 -#define MTK_BT_RESET_NUM_TRIES 10static void btusb_mtk_wmt_recv (struct urb *urb) {
@@ -2690,6 +2688,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)return btusb_mtk_reg_read (data, reg, id); } +static u32 btusb_mtk_reset_done (struct hci_dev *hdev) +{ +struct btusb_data *data =hci_get_drvdata (hdev); +u32 val =0 ; + +btusb_mtk_uhw_reg_read (data,MTK_BT_MISC , &val); + +return val; +} +static int btusb_mtk_setup (struct hci_dev *hdev) {struct btusb_data *data =hci_get_drvdata (hdev);
@@ -2879,7 +2887,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev) {struct btusb_data *data =hci_get_drvdata (hdev);u32 val; -int err, retry =0 ; +int err;/* It's MediaTek specific bluetooth reset mechanism via USB */ if (test_and_set_bit (BTUSB_HW_RESET_ACTIVE , &data->flags)) {
@@ -2910,18 +2918,14 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)btusb_mtk_uhw_reg_write (data,MTK_BT_SUBSYS_RST ,0 );btusb_mtk_uhw_reg_read (data,MTK_BT_SUBSYS_RST , &val); -/* Poll the register until reset is completed */ -do { -btusb_mtk_uhw_reg_read (data,MTK_BT_MISC , &val); -if (val &MTK_BT_RST_DONE ) { -bt_dev_dbg (hdev,"Bluetooth Reset Successfully" ); -break ; - } + err =readx_poll_timeout (btusb_mtk_reset_done, hdev, val, + val &MTK_BT_RST_DONE , +100000 ,1000000 ); +if (err <0 ) +bt_dev_err (hdev,"Reset timeout" ); -bt_dev_dbg (hdev,"Polling Bluetooth Reset CR" ); - retry++; -msleep (MTK_BT_RESET_WAIT_MS ); - }while (retry <MTK_BT_RESET_NUM_TRIES ); +if (val &MTK_BT_RST_DONE ) +bt_dev_dbg (hdev,"Bluetooth Reset Successfully" );btusb_mtk_id_get (data,0x70010200 , &val);if (!val)
Signature · 1 line
2.25.1
PATCH 2/4 Bluetooth: btmtk: introduce btmtk reset work
From: Jing Cai <[email protected]>
Introduce btmtk_reset_work which can be called whenever the firmware abort, HCI command timeout, other fatal error happen.
--- drivers/bluetooth/btmtk.c | 16 ++++++ drivers/bluetooth/btmtk.h | 14 +++++ drivers/bluetooth/btusb.c | 114 ++++++++++++++++++++------------------ 3 files changed, 90 insertions(+), 54 deletions(-)
drivers/bluetooth/btmtk.c +16 -0
@@ -53,6 +53,8 @@ struct btmtk_section_map { }; } __packed; +static struct btmtk_reset_work reset_work; +int btmtk_setup_firmware_79xx (struct hci_dev *hdev,const char *fwname,wmt_cmd_sync_func_t wmt_cmd_sync) {
@@ -280,6 +282,20 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) }EXPORT_SYMBOL_GPL (btmtk_set_bdaddr); +void btmtk_init_reset_work (struct hci_dev *hdev,work_func_t func) +{ + reset_work.hdev = hdev; +INIT_WORK (&reset_work.work, func); +} +EXPORT_SYMBOL_GPL (btmtk_init_reset_work); + +void btmtk_reset_sync (struct hci_dev *hdev) +{ +schedule_work (&reset_work.work); +flush_work (&reset_work.work); +} +EXPORT_SYMBOL_GPL (btmtk_reset_sync); +MODULE_AUTHOR ("Sean Wang <[email protected]>" );MODULE_AUTHOR ("Mark Chen <[email protected]>" );MODULE_DESCRIPTION ("Bluetooth support for MediaTek devices ver " VERSION );
drivers/bluetooth/btmtk.h +14 -0
@@ -119,6 +119,11 @@ struct btmtk_hci_wmt_params {u32 *status; }; +struct btmtk_reset_work { +struct hci_dev *hdev; +struct work_struct work; +}; +typedef int (*wmt_cmd_sync_func_t )(struct hci_dev *,struct btmtk_hci_wmt_params *);
@@ -131,6 +136,8 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,int btmtk_setup_firmware (struct hci_dev *hdev,const char *fwname,wmt_cmd_sync_func_t wmt_cmd_sync); +void btmtk_init_reset_work (struct hci_dev *hdev,work_func_t func); +void btmtk_reset_sync (struct hci_dev *hdev);#else static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -151,4 +158,11 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname, return -EOPNOTSUPP; } +static void btmtk_init_reset_work (struct hci_dev *hdev,work_func_t func) +{ +} + +static void btmtk_reset_sync (struct hci_dev *hdev) +{ +}#endif
drivers/bluetooth/btusb.c +60 -54
138 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 3/4 Bluetooth: btusb: mediatek: reset the device as WMT failed
In reply to [email protected]From: Sean Wang <[email protected]>
Reset the BT device whenever the driver detected any WMT failure happened to recover such kind of system-level error as soon as possible.
--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/bluetooth/btusb.c +4 -0
@@ -2576,6 +2576,10 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, data->evt_skb =NULL ; err_free_wc:kfree (wc); + +if (err <0 ) +btmtk_reset_sync (hdev); +return err; }
Signature · 1 line
2.25.1
AngeloGioacchino Del Regno
maintainerRe: [PATCH 3/4] Bluetooth: btusb: mediatek: reset the device as WMT failed
Il 13/09/22 00:18, [email protected] ha scritto:
Quoted 6 lines
From: Sean Wang <[email protected]>
Reset the BT device whenever the driver detected any WMT failure happened to recover such kind of system-level error as soon as possible.
Signed-off-by Sean Wang <[email protected]>
This looks like a fix, so you probably want a Fixes tag for backport.
Regards,
Angelo
Quoted 19 lines
--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/bluetooth/btusb.c +4
-0@@ -2576,6 +2576,10 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, data->evt_skb =NULL ; err_free_wc:kfree (wc); + +if (err <0 ) +btmtk_reset_sync (hdev); +return err; }
Re: [PATCH 3/4] Bluetooth: btusb: mediatek: reset the device as WMT failed
Hi, Angelo
Quoted 10 lines · AngeloGioacchino Del Regno
Il 13/09/22 00:18, [email protected] ha scritto:
Quoted 6 lines
From: Sean Wang <[email protected]>
Reset the BT device whenever the driver detected any WMT failure happened to recover such kind of system-level error as soon as possible.
Signed-off-by Sean Wang <[email protected]>This looks like a fix, so you probably want a Fixes tag for backport.
I didn't add the fix tag because there is not a previous patch that had issues the patch needs to fix.
It would be looking more like an enhancement patch for me to fix up the potential issue happening in the firmware where the existing driver cannot detect and recover in time with .cmd_timeout callback but actually, the kind of potential issue in firmware I was worried about in the firmware didn't happen or being reported so far.
Sean
Quoted 24 lines
Regards,
AngeloQuoted 19 lines
--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/bluetooth/btusb.c +4
-0@@ -2576,6 +2576,10 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, data->evt_skb =NULL ; err_free_wc:kfree (wc); + +if (err <0 ) +btmtk_reset_sync (hdev); +return err; }
Luiz Augusto von Dentz
maintainerRe: [PATCH 3/4] Bluetooth: btusb: mediatek: reset the device as WMT failed
In reply to [email protected]Hi Sean,
Quoted 16 lines · On Mon, Sep 12, 2022 at 3:18 PM <[email protected]> wrote:
From: Sean Wang <[email protected]>
Reset the BT device whenever the driver detected any WMT failure happened to recover such kind of system-level error as soon as possible.
Signed-off-by Sean Wang <[email protected]>--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, · line 2581
Quoted 6 lines
drivers/bluetooth/btusb.c +3
-0@@ -2576,6 +2576,10 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, data->evt_skb =NULL ; err_free_wc:kfree (wc); + +if (err <0 ) +btmtk_reset_sync (hdev);
Doesn't reset itself can fail?
drivers/bluetooth/btusb.c static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, · line 2583
Quoted 1 line
drivers/bluetooth/btusb.c +0
-0return err;
It would probably be better to reset on error at the caller IMO, also in case it fails during firmware upload does reset even work? Also it would probably have been better to have its own file for vendor specific commands like this and use btmtk_ prefix as well.
Quoted 5 lines
drivers/bluetooth/btusb.c +0
-1} --2.25.1
Signature · 1 line
Luiz Augusto von Dentz
Re: [PATCH 3/4] Bluetooth: btusb: mediatek: reset the device as WMT failed
Hi Luiz,
Quoted 15 lines · Luiz Augusto von Dentz
Hi Sean,
Quoted 11 lines · On Mon, Sep 12, 2022 at 3:18 PM <[email protected]> wrote:
From: Sean Wang <[email protected]>
Reset the BT device whenever the driver detected any WMT failure happened to recover such kind of system-level error as soon as possible.
Signed-off-by Sean Wang <[email protected]>--- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
Quoted 13 lines
drivers/bluetooth/btusb.c static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, · line 2581
Quoted 11 lines
drivers/bluetooth/btusb.c +3
-0@@ -2576,6 +2576,10 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, data->evt_skb =NULL ; err_free_wc:kfree (wc); + +if (err <0 ) +btmtk_reset_sync (hdev);Doesn't reset itself can fail?
The reset is supposed not to fail so there is no return value is designated in the function
Quoted 5 lines
drivers/bluetooth/btusb.c static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, · line 2583
Quoted 2 lines
drivers/bluetooth/btusb.c +0
-0return err;It would probably be better to reset on error at the caller IMO, also in case it fails during firmware upload does reset even work? Also it
The reset is supposed to work even without the firmware uploaded but I need to have further confirmation with fw folks to ensure this point. Anyway, I will try to move the reset on the error at the caller or based on the context in the next version because I thought again that will also help
working out a patch to recover any error present at firmware initialization that the driver currently cannot handle and the patch cannot cover.
Quoted 2 lines
would probably have been better to have its own file for vendor specific commands like this and use
btmtk_prefix as well.
I had tried to move btusb_mtk_hci_wmt_sync to btmtk.c to allow it to be reused by all mtk bluetooth drivers but some reason stopped me from doing that.
that is btusb_mtk_hci_wmt_sync has the reference to the data bundled with btusb.c and it seemed a bit harder for me to split out from btusb.c for the moment,
such as btusb data->flag the function will refer to and is shared by all vendors, so I still temporarily leave the vendor-specific commands there.
I think that would be easy to do if btusb.c can support a pointer in struct btusb_data pointed to the vendor-specific data area where I can put the flag and other
vendor-specific stuff the btmtk.c needed there.
Sean
Quoted 10 lines
Quoted 6 lines
drivers/bluetooth/btusb.c +0
-1} --2.25.1
--
Luiz Augusto von Dentz
PATCH 4/4 Bluetooth: btusb: mediatek: add MediaTek devcoredump support
In reply to [email protected]From: Jing Cai <[email protected]>
This patch implement function .coredump() and dmp_hdr() in btusb driver for MediaTek controller. FW core dump was triggered by FW specific event to show something unexpected happened in the controller.
The driver would be responsible for collecting and uploading the device core dump pieces in hci driver using core dump API. Once we finished the whole process, the driver would reset the controller to recover the kind of fatal error.
---
The patch need to work on the top of the patch provided from Manish Mandlik
in https://patchwork.kernel.org/project/bluetooth/patch/20220809083112.v4.3.Iaf638bb9f885f5880ab1b4e7ae2f73dd53a54661@changeid/
--- drivers/bluetooth/btmtk.c | 124 ++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/btmtk.h | 13 ++++ drivers/bluetooth/btusb.c | 11 ++++ 3 files changed, 148 insertions(+)
drivers/bluetooth/btmtk.c +124 -0
@@ -18,6 +18,14 @@#define MTK_FW_ROM_PATCH_SEC_MAP_SIZE 64#define MTK_SEC_MAP_COMMON_SIZE 12#define MTK_SEC_MAP_NEED_SEND_SIZE 52 +#define MTK_DRIVER_NAME_LEN 16 +#define MTK_COREDUMP_END "coredump end" + +enum { +BTMTK_COREDUMP_INIT , +BTMTK_COREDUMP_DISABLED , +BTMTK_COREDUMP_ACTIVE , +};struct btmtk_patch_header {u8 datetime[16 ];
@@ -53,8 +61,65 @@ struct btmtk_section_map { }; } __packed; +static struct btmtk_coredump_info { +struct hci_dev *hdev; +char driver_name[MTK_DRIVER_NAME_LEN ]; +u32 dev_id; +u32 fw_version; +int state; +} coredump_info; +static struct btmtk_reset_work reset_work; +static void btmtk_coredump (struct hci_dev *hdev) +{ +int err; + + err =__hci_cmd_send (hdev,0xfd5b ,0 ,NULL ); +if (err <0 ) +bt_dev_err (hdev,"Coredump failed (%d)" , err); +} + +static int btmtk_coredump_hdr (struct hci_dev *hdev,char *buf,size_t size) +{ +char *ptr = buf; +size_t rem = size; +size_t read =0 ; + + read =snprintf (ptr, rem,"Controller Name: 0x%X\n" , coredump_info.dev_id); + rem -= read; + ptr += read; + + read =snprintf (ptr, rem,"Firmware Version: 0x%X\n" , coredump_info.fw_version); + rem -= read; + ptr += read; + + read =snprintf (ptr, rem,"Driver: %s\n" , coredump_info.driver_name); + rem -= read; + ptr += read; + + read =snprintf (ptr, rem,"Vendor: MediaTek\n" ); + rem -= read; + ptr += read; + +return size - rem; +} + +static void btmtk_coredump_notify (struct hci_dev *hdev,int state) +{ +switch (state) { +case HCI_DEVCOREDUMP_ACTIVE : + coredump_info.state =BTMTK_COREDUMP_ACTIVE ; +break ; +case HCI_DEVCOREDUMP_TIMEOUT : +case HCI_DEVCOREDUMP_ABORT : +case HCI_DEVCOREDUMP_DONE : + coredump_info.state =BTMTK_COREDUMP_INIT ; +btmtk_reset_sync (coredump_info.hdev); +break ; + } +} +int btmtk_setup_firmware_79xx (struct hci_dev *hdev,const char *fwname,wmt_cmd_sync_func_t wmt_cmd_sync) {
@@ -296,6 +361,65 @@ void btmtk_reset_sync(struct hci_dev *hdev) }EXPORT_SYMBOL_GPL (btmtk_reset_sync); +void btmtk_register_coredump (struct hci_dev *hdev,u32 dev_id, +const char *name,u32 fw_version) +{ +if (!IS_ENABLED (CONFIG_DEV_COREDUMP )) +return ; + + coredump_info.hdev = hdev; + coredump_info.dev_id = dev_id; + coredump_info.fw_version = fw_version; + coredump_info.state =BTMTK_COREDUMP_INIT ; +strncpy (coredump_info.driver_name, name,MTK_DRIVER_NAME_LEN -1 ); + +hci_devcoredump_register (hdev, btmtk_coredump, btmtk_coredump_hdr, + btmtk_coredump_notify); +} +EXPORT_SYMBOL_GPL (btmtk_register_coredump); + +int btmtk_process_coredump (struct hci_dev *hdev,struct sk_buff *skb) +{ +int err; + +if (!IS_ENABLED (CONFIG_DEV_COREDUMP )) +return 0 ; + +switch (coredump_info.state) { +case BTMTK_COREDUMP_DISABLED : + err = -EINVAL ; +break ; +case BTMTK_COREDUMP_INIT : + err =hci_devcoredump_init (hdev,1024000 ); +if (err <0 ) +break ; +/* It is supposed coredump can be done within 5 seconds */ +schedule_delayed_work (&hdev->dump.dump_timeout, +msecs_to_jiffies (5000 )); + fallthrough; +case BTMTK_COREDUMP_ACTIVE : +default : + err =hci_devcoredump_append (hdev, skb); +if (err <0 ) +break ; + +if (skb->len >12 && + !strncmp ((char *)&skb->data[skb->len -13 ], +MTK_COREDUMP_END ,12 )) +hci_devcoredump_complete (hdev); + +break ; + } + +if (err <0 ) { + coredump_info.state =BTMTK_COREDUMP_DISABLED ; +kfree_skb (skb); + } + +return err; +} +EXPORT_SYMBOL_GPL (btmtk_process_coredump); +MODULE_AUTHOR ("Sean Wang <[email protected]>" );MODULE_AUTHOR ("Mark Chen <[email protected]>" );MODULE_DESCRIPTION ("Bluetooth support for MediaTek devices ver " VERSION );
drivers/bluetooth/btmtk.h +13 -0
@@ -138,6 +138,9 @@ int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname, wmt_cmd_sync_func_t wmt_cmd_sync);void btmtk_init_reset_work (struct hci_dev *hdev,work_func_t func);void btmtk_reset_sync (struct hci_dev *hdev); +void btmtk_register_coredump (struct hci_dev *hdev,u32 dev_id,const char *name, +u32 fw_version); +int btmtk_process_coredump (struct hci_dev *hdev,struct sk_buff *skb);#else static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -165,4 +168,14 @@ static void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func)static void btmtk_reset_sync (struct hci_dev *hdev) { } + +void btmtk_register_coredump (struct hci_dev *hdev,u32 dev_id,const char *name, +u32 fw_version) +{ +} + +static int btmtk_process_coredump (struct hci_dev *hdev,struct sk_buff *skb) +{ +return -EOPNOTSUPP ; +}#endif
drivers/bluetooth/btusb.c +11 -0
@@ -2796,6 +2796,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev) }btmtk_init_reset_work (hdev, btusb_mtk_reset_work); +btmtk_register_coredump (hdev, dev_id, btusb_driver.name, fw_version);switch (dev_id) {case 0x7663 :
@@ -2950,6 +2951,7 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb) {struct btusb_data *data =hci_get_drvdata (hdev);u16 handle =le16_to_cpu (hci_acl_hdr (skb)->handle); +struct sk_buff *skb_cd;switch (handle) {case 0xfc6f :/* Firmware dump from device */
@@ -2957,6 +2959,15 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)* suspend and thus disable auto-suspend. */ usb_disable_autosuspend (data->udev); + +/* We need to forward the diagnostic packet to userspace daemon +* for backward compatibility, so we have to clone the packet +* extraly for the in-kernel coredump support. +*/ + skb_cd =skb_clone (skb,GFP_ATOMIC ); +if (skb_cd) +btmtk_process_coredump (hdev, skb_cd); + fallthrough;case 0x05ff :/* Firmware debug logging 1 */ case 0x05fe :/* Firmware debug logging 2 */
Signature · 1 line
2.25.1
kernel test robot
build botRe: [PATCH 4/4] Bluetooth: btusb: mediatek: add MediaTek devcoredump support
Thank you for the patch! Yet something to improve:
Hi,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on bluetooth/master]
[also build test ERROR on bluetooth-next/master linus/master v6.0-rc5 next-20220912] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git master config: arc-randconfig-r043-20220912 (https://download.01.org/0day-ci/archive/20220913/[email protected]/config) compiler: arc-elf-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d478461e2fd5fdd8d505c00c7864a421170a54bb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 git checkout d478461e2fd5fdd8d505c00c7864a421170a54bb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arc SHELL=/bin/bash drivers/bluetooth/
If you fix the issue, kindly add following tag where applicable
All errors (new ones prefixed by >>):
drivers/bluetooth/btmtk.c: In function 'btmtk_coredump_notify':
>> drivers/bluetooth/btmtk.c:111:14: error: 'HCI_DEVCOREDUMP_ACTIVE' undeclared (first use in this function); did you mean 'BTMTK_COREDUMP_ACTIVE'?
111 | case HCI_DEVCOREDUMP_ACTIVE:
| ^~~~~~~~~~~~~~~~~~~~~~
| BTMTK_COREDUMP_ACTIVE
drivers/bluetooth/btmtk.c:111:14: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/bluetooth/btmtk.c:114:14: error: 'HCI_DEVCOREDUMP_TIMEOUT' undeclared (first use in this function); did you mean 'HCI_LE_CONN_TIMEOUT'?
114 | case HCI_DEVCOREDUMP_TIMEOUT:
| ^~~~~~~~~~~~~~~~~~~~~~~
| HCI_LE_CONN_TIMEOUT
>> drivers/bluetooth/btmtk.c:115:14: error: 'HCI_DEVCOREDUMP_ABORT' undeclared (first use in this function)
115 | case HCI_DEVCOREDUMP_ABORT:
| ^~~~~~~~~~~~~~~~~~~~~
>> drivers/bluetooth/btmtk.c:116:14: error: 'HCI_DEVCOREDUMP_DONE' undeclared (first use in this function)
116 | case HCI_DEVCOREDUMP_DONE:
| ^~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function 'btmtk_register_coredump':
>> drivers/bluetooth/btmtk.c:376:9: error: implicit declaration of function 'hci_devcoredump_register' [-Werror=implicit-function-declaration]
376 | hci_devcoredump_register(hdev, btmtk_coredump, btmtk_coredump_hdr,
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function 'btmtk_process_coredump':
>> drivers/bluetooth/btmtk.c:393:23: error: implicit declaration of function 'hci_devcoredump_init' [-Werror=implicit-function-declaration]
393 | err = hci_devcoredump_init(hdev, 1024000);
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/bluetooth/btmtk.c:397:44: error: 'struct hci_dev' has no member named 'dump'
397 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~
>> drivers/bluetooth/btmtk.c:402:23: error: implicit declaration of function 'hci_devcoredump_append' [-Werror=implicit-function-declaration]
402 | err = hci_devcoredump_append(hdev, skb);
| ^~~~~~~~~~~~~~~~~~~~~~
>> drivers/bluetooth/btmtk.c:409:25: error: implicit declaration of function 'hci_devcoredump_complete' [-Werror=implicit-function-declaration]
409 | hci_devcoredump_complete(hdev);
| ^~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
vim +111 drivers/bluetooth/btmtk.c
107
108 static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
109 {
110 switch (state) {
> 111 case HCI_DEVCOREDUMP_ACTIVE: 112 coredump_info.state = BTMTK_COREDUMP_ACTIVE; 113 break; > 114 case HCI_DEVCOREDUMP_TIMEOUT: > 115 case HCI_DEVCOREDUMP_ABORT: > 116 case HCI_DEVCOREDUMP_DONE:
117 coredump_info.state = BTMTK_COREDUMP_INIT;
118 btmtk_reset_sync(coredump_info.hdev);
119 break;
120 }
121 }
122
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
kernel test robot
build botRe: [PATCH 4/4] Bluetooth: btusb: mediatek: add MediaTek devcoredump support
In reply to [email protected]Thank you for the patch! Yet something to improve:
Hi,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on bluetooth/master]
[also build test ERROR on bluetooth-next/master linus/master v6.0-rc5 next-20220912] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git master config: i386-randconfig-a016-20220912 (https://download.01.org/0day-ci/archive/20220913/[email protected]/config) compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d478461e2fd5fdd8d505c00c7864a421170a54bb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 git checkout d478461e2fd5fdd8d505c00c7864a421170a54bb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash drivers/bluetooth/
If you fix the issue, kindly add following tag where applicable
All errors (new ones prefixed by >>):
>> drivers/bluetooth/btmtk.c:111:7: error: use of undeclared identifier 'HCI_DEVCOREDUMP_ACTIVE'; did you mean 'BTMTK_COREDUMP_ACTIVE'?
case HCI_DEVCOREDUMP_ACTIVE:
^~~~~~~~~~~~~~~~~~~~~~
BTMTK_COREDUMP_ACTIVE
drivers/bluetooth/btmtk.c:27:2: note: 'BTMTK_COREDUMP_ACTIVE' declared here
BTMTK_COREDUMP_ACTIVE,
^
>> drivers/bluetooth/btmtk.c:114:7: error: use of undeclared identifier 'HCI_DEVCOREDUMP_TIMEOUT'
case HCI_DEVCOREDUMP_TIMEOUT:
^
>> drivers/bluetooth/btmtk.c:115:7: error: use of undeclared identifier 'HCI_DEVCOREDUMP_ABORT'
case HCI_DEVCOREDUMP_ABORT:
^
>> drivers/bluetooth/btmtk.c:116:7: error: use of undeclared identifier 'HCI_DEVCOREDUMP_DONE'
case HCI_DEVCOREDUMP_DONE:
^
>> drivers/bluetooth/btmtk.c:376:2: error: implicit declaration of function 'hci_devcoredump_register' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
hci_devcoredump_register(hdev, btmtk_coredump, btmtk_coredump_hdr,
^
>> drivers/bluetooth/btmtk.c:393:9: error: implicit declaration of function 'hci_devcoredump_init' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
err = hci_devcoredump_init(hdev, 1024000);
^
>> drivers/bluetooth/btmtk.c:397:32: error: no member named 'dump' in 'struct hci_dev'
schedule_delayed_work(&hdev->dump.dump_timeout,
~~~~ ^
>> drivers/bluetooth/btmtk.c:402:9: error: implicit declaration of function 'hci_devcoredump_append' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
err = hci_devcoredump_append(hdev, skb);
^
drivers/bluetooth/btmtk.c:402:9: note: did you mean 'hci_devcoredump_init'?
drivers/bluetooth/btmtk.c:393:9: note: 'hci_devcoredump_init' declared here
err = hci_devcoredump_init(hdev, 1024000);
^
>> drivers/bluetooth/btmtk.c:409:4: error: implicit declaration of function 'hci_devcoredump_complete' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
hci_devcoredump_complete(hdev);
^
drivers/bluetooth/btmtk.c:409:4: note: did you mean 'hci_devcoredump_append'?
drivers/bluetooth/btmtk.c:402:9: note: 'hci_devcoredump_append' declared here
err = hci_devcoredump_append(hdev, skb);
^9 errors generated.
vim +111 drivers/bluetooth/btmtk.c
107
108 static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
109 {
110 switch (state) {
> 111 case HCI_DEVCOREDUMP_ACTIVE: 112 coredump_info.state = BTMTK_COREDUMP_ACTIVE; 113 break; > 114 case HCI_DEVCOREDUMP_TIMEOUT: > 115 case HCI_DEVCOREDUMP_ABORT: > 116 case HCI_DEVCOREDUMP_DONE:
117 coredump_info.state = BTMTK_COREDUMP_INIT;
118 btmtk_reset_sync(coredump_info.hdev);
119 break;
120 }
121 }
122
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
kernel test robot
build botRe: [PATCH 4/4] Bluetooth: btusb: mediatek: add MediaTek devcoredump support
In reply to [email protected]Thank you for the patch! Perhaps something to improve:
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth/master]
[also build test WARNING on bluetooth-next/master linus/master v6.0-rc5 next-20220912] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git master config: m68k-randconfig-r033-20220911 (https://download.01.org/0day-ci/archive/20220913/[email protected]/config) compiler: m68k-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d478461e2fd5fdd8d505c00c7864a421170a54bb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review sean-wang-mediatek-com/Bluetooth-btusb-mediatek-use-readx_poll_timeout-instead-of-open-coding/20220913-062200 git checkout d478461e2fd5fdd8d505c00c7864a421170a54bb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/
If you fix the issue, kindly add following tag where applicable
All warnings (new ones prefixed by >>):
In file included from drivers/bluetooth/btusb.c:28:
>> drivers/bluetooth/btmtk.h:172:6: warning: no previous prototype for 'btmtk_register_coredump' [-Wmissing-prototypes]
172 | void btmtk_register_coredump(struct hci_dev *hdev, u32 dev_id, const char *name,
| ^~~~~~~~~~~~~~~~~~~~~~~
vim +/btmtk_register_coredump +172 drivers/bluetooth/btmtk.h
171
> 172 void btmtk_register_coredump(struct hci_dev *hdev, u32 dev_id, const char *name,
173 u32 fw_version)
174 {
175 }
176
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=676354
---Test result---
Test Summary:
CheckPatch PASS 5.17 seconds GitLint FAIL 1.94 seconds SubjectPrefix PASS 1.26 seconds BuildKernel FAIL 46.70 seconds BuildKernel32 FAIL 40.93 seconds Incremental Build with patchesERROR 0.19 seconds TestRunner: Setup PASS 684.69 seconds TestRunner: l2cap-tester PASS 21.12 seconds TestRunner: iso-tester PASS 21.32 seconds TestRunner: bnep-tester PASS 8.21 seconds TestRunner: mgmt-tester PASS 132.98 seconds TestRunner: rfcomm-tester PASS 12.65 seconds TestRunner: sco-tester PASS 12.08 seconds TestRunner: smp-tester PASS 12.00 seconds TestRunner: userchan-tester PASS 8.63 seconds
Details
##############################
Test: GitLint - FAIL - 1.94 seconds
Run gitlint with rule in .gitlint
[4/4] Bluetooth: btusb: mediatek: add MediaTek devcoredump support
19: B1 Line exceeds max length (127>80): "in https://patchwork.kernel.org/project/bluetooth/patch/20220809083112.v4.3.Iaf638bb9f885f5880ab1b4e7ae2f73dd53a54661@changeid/"
##############################
Test: BuildKernel - FAIL - 46.70 seconds
Build Kernel with minimal configuration supports Bluetoothdrivers/bluetooth/btmtk.c: In function ‘btmtk_coredump_notify’:drivers/bluetooth/btmtk.c:111:7: error: ‘HCI_DEVCOREDUMP_ACTIVE’ undeclared (first use in this function); did you mean ‘BTMTK_COREDUMP_ACTIVE’?
111 | case HCI_DEVCOREDUMP_ACTIVE:
| ^~~~~~~~~~~~~~~~~~~~~~
| BTMTK_COREDUMP_ACTIVE
drivers/bluetooth/btmtk.c:111:7: note: each undeclared identifier is reported only once for each function it appears in
drivers/bluetooth/btmtk.c:114:7: error: ‘HCI_DEVCOREDUMP_TIMEOUT’ undeclared (first use in this function); did you mean ‘HCI_DISCONN_TIMEOUT’?
114 | case HCI_DEVCOREDUMP_TIMEOUT:
| ^~~~~~~~~~~~~~~~~~~~~~~
| HCI_DISCONN_TIMEOUT
drivers/bluetooth/btmtk.c:115:7: error: ‘HCI_DEVCOREDUMP_ABORT’ undeclared (first use in this function)
115 | case HCI_DEVCOREDUMP_ABORT:
| ^~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c:116:7: error: ‘HCI_DEVCOREDUMP_DONE’ undeclared (first use in this function)
116 | case HCI_DEVCOREDUMP_DONE:
| ^~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function ‘btmtk_register_coredump’:
drivers/bluetooth/btmtk.c:376:2: error: implicit declaration of function ‘hci_devcoredump_register’ [-Werror=implicit-function-declaration]
376 | hci_devcoredump_register(hdev, btmtk_coredump, btmtk_coredump_hdr,
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function ‘btmtk_process_coredump’:
drivers/bluetooth/btmtk.c:393:9: error: implicit declaration of function ‘hci_devcoredump_init’ [-Werror=implicit-function-declaration]
393 | err = hci_devcoredump_init(hdev, 1024000);
| ^~~~~~~~~~~~~~~~~~~~drivers/bluetooth/btmtk.c:397:30: error: ‘struct hci_dev’ has no member named ‘dump’
397 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~drivers/bluetooth/btmtk.c:402:9: error: implicit declaration of function ‘hci_devcoredump_append’ [-Werror=implicit-function-declaration]
402 | err = hci_devcoredump_append(hdev, skb);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c:409:4: error: implicit declaration of function ‘hci_devcoredump_complete’ [-Werror=implicit-function-declaration]
409 | hci_devcoredump_complete(hdev);
| ^~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:249: drivers/bluetooth/btmtk.o] Error 1 make[1]: *** [scripts/Makefile.build:465: drivers/bluetooth] Error 2
make: *** [Makefile:1855: drivers] Error 2
##############################
Test: BuildKernel32 - FAIL - 40.93 seconds
Build 32bit Kernel with minimal configuration supports Bluetoothdrivers/bluetooth/btmtk.c: In function ‘btmtk_coredump_notify’:drivers/bluetooth/btmtk.c:111:7: error: ‘HCI_DEVCOREDUMP_ACTIVE’ undeclared (first use in this function); did you mean ‘BTMTK_COREDUMP_ACTIVE’?
111 | case HCI_DEVCOREDUMP_ACTIVE:
| ^~~~~~~~~~~~~~~~~~~~~~
| BTMTK_COREDUMP_ACTIVE
drivers/bluetooth/btmtk.c:111:7: note: each undeclared identifier is reported only once for each function it appears in
drivers/bluetooth/btmtk.c:114:7: error: ‘HCI_DEVCOREDUMP_TIMEOUT’ undeclared (first use in this function); did you mean ‘HCI_DISCONN_TIMEOUT’?
114 | case HCI_DEVCOREDUMP_TIMEOUT:
| ^~~~~~~~~~~~~~~~~~~~~~~
| HCI_DISCONN_TIMEOUT
drivers/bluetooth/btmtk.c:115:7: error: ‘HCI_DEVCOREDUMP_ABORT’ undeclared (first use in this function)
115 | case HCI_DEVCOREDUMP_ABORT:
| ^~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c:116:7: error: ‘HCI_DEVCOREDUMP_DONE’ undeclared (first use in this function)
116 | case HCI_DEVCOREDUMP_DONE:
| ^~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function ‘btmtk_register_coredump’:
drivers/bluetooth/btmtk.c:376:2: error: implicit declaration of function ‘hci_devcoredump_register’ [-Werror=implicit-function-declaration]
376 | hci_devcoredump_register(hdev, btmtk_coredump, btmtk_coredump_hdr,
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c: In function ‘btmtk_process_coredump’:
drivers/bluetooth/btmtk.c:393:9: error: implicit declaration of function ‘hci_devcoredump_init’ [-Werror=implicit-function-declaration]
393 | err = hci_devcoredump_init(hdev, 1024000);
| ^~~~~~~~~~~~~~~~~~~~drivers/bluetooth/btmtk.c:397:30: error: ‘struct hci_dev’ has no member named ‘dump’
397 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~drivers/bluetooth/btmtk.c:402:9: error: implicit declaration of function ‘hci_devcoredump_append’ [-Werror=implicit-function-declaration]
402 | err = hci_devcoredump_append(hdev, skb);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.c:409:4: error: implicit declaration of function ‘hci_devcoredump_complete’ [-Werror=implicit-function-declaration]
409 | hci_devcoredump_complete(hdev);
| ^~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:249: drivers/bluetooth/btmtk.o] Error 1 make[1]: *** [scripts/Makefile.build:465: drivers/bluetooth] Error 2
make: *** [Makefile:1855: drivers] Error 2
##############################
Test: Incremental Build with patches - SKIPPED - 0.19 seconds Incremental build per patch in the series buildkernel failed
---
Regards,
Linux Bluetooth
AngeloGioacchino Del Regno
maintainerIl 13/09/22 00:18, [email protected] ha scritto:
Quoted 6 lines
From: Sean Wang <[email protected]>
Use
readx_poll_timeoutinstead of open coding to poll the hardware reset status until it is done.Signed-off-by Sean Wang <[email protected]>
Hello Sean, thanks for the patch!
However, there's something to improve...
Quoted 8 lines
--- drivers/bluetooth/btusb.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)drivers/bluetooth/btusb.c +0
-0
..snip..
Quoted 4 lines
drivers/bluetooth/btusb.c +0
-0@@ -2910,18 +2918,14 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)btusb_mtk_uhw_reg_write (data,MTK_BT_SUBSYS_RST ,0 );btusb_mtk_uhw_reg_read (data,MTK_BT_SUBSYS_RST , &val);
drivers/bluetooth/btusb.c static void btusb_mtk_cmd_timeout(struct hci_dev *hdev) · line 2923
Quoted 10 lines
drivers/bluetooth/btusb.c +3
-7-/* Poll the register until reset is completed */ - do { - btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val); - if (val & MTK_BT_RST_DONE) { - bt_dev_dbg(hdev, "Bluetooth Reset Successfully"); - break; - } + err =readx_poll_timeout (btusb_mtk_reset_done, hdev, val, + val &MTK_BT_RST_DONE , +100000 ,1000000 );
I agree with using readx_poll_timeout() instead of open coding the same, but there's a catch: this macro uses usleep_range(), which is meant to be used for sleeping less than ~20ms.
Even the kerneldoc at include/linux/iopoll.h advertises that:
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
* is used (see Documentation/timers/timers-howto.rst).
So, if there's any reason for which you can't sleep for less than 100ms per iteration, I'm afraid that you can't use readx_poll_timeout()... ...otherwise, please change sleep_us to 20000 and keep the timeout at 1 sec.
Regards,
Angelo
Quoted 12 lines
drivers/bluetooth/btusb.c +4
-4+if (err <0 ) +bt_dev_err (hdev,"Reset timeout" ); -bt_dev_dbg (hdev,"Polling Bluetooth Reset CR" ); - retry++; -msleep (MTK_BT_RESET_WAIT_MS ); - }while (retry <MTK_BT_RESET_NUM_TRIES ); +if (val &MTK_BT_RST_DONE ) +bt_dev_dbg (hdev,"Bluetooth Reset Successfully" );btusb_mtk_id_get (data,0x70010200 , &val);if (!val)
HI Angelo,
Quoted 44 lines · AngeloGioacchino Del Regno
Il 13/09/22 00:18, [email protected] ha scritto:
Quoted 6 lines
From: Sean Wang <[email protected]>
Use
readx_poll_timeoutinstead of open coding to poll the hardware reset status until it is done.Signed-off-by Sean Wang <[email protected]>Hello Sean, thanks for the patch!
However, there's something to improve...Quoted 8 lines
--- drivers/bluetooth/btusb.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)drivers/bluetooth/btusb.c +0
-0..snip..
Quoted 4 lines
drivers/bluetooth/btusb.c +0
-0@@ -2910,18 +2918,14 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)btusb_mtk_uhw_reg_write (data,MTK_BT_SUBSYS_RST ,0 );btusb_mtk_uhw_reg_read (data,MTK_BT_SUBSYS_RST , &val);drivers/bluetooth/btusb.c static void btusb_mtk_cmd_timeout(struct hci_dev *hdev) · line 2923
Quoted 10 lines
drivers/bluetooth/btusb.c +3
-7-/* Poll the register until reset is completed */ - do { - btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val); - if (val & MTK_BT_RST_DONE) { - bt_dev_dbg(hdev, "Bluetooth Reset Successfully"); - break; - } + err =readx_poll_timeout (btusb_mtk_reset_done, hdev, val, + val &MTK_BT_RST_DONE , +100000 ,1000000 );I agree with using
readx_poll_timeout()instead of open coding the same, but there's a catch: this macro usesusleep_range(), which is meant to be used for sleeping less than ~20ms.Even the kerneldoc at
include/linux/iopoll.hadvertises that:
Quoted 8 lines
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms sinceusleep_range
* is used (seeDocumentation/timers/timers-howto.rst).So, if there's any reason for which you can't sleep for less than 100ms per iteration, I'm afraid that you can't use
readx_poll_timeout()... ...otherwise, please changesleep_usto 20000 and keep the timeout at 1 sec.
It should be able to be done with polling in 20ms until 1 sec expires or it is done. It increases some cost in the bus transaction interacting with the device, but it seemed fine for me because the code path is cold, it is only working in the device reset which should rarely happen, and only involves when it is really necessary. That is a nice catch. I was trying not to break the existing logic but overlooked the requirements of the API.
Sean
Quoted 16 lines
Regards,
AngeloQuoted 12 lines
drivers/bluetooth/btusb.c +4
-4+if (err <0 ) +bt_dev_err (hdev,"Reset timeout" ); -bt_dev_dbg (hdev,"Polling Bluetooth Reset CR" ); - retry++; -msleep (MTK_BT_RESET_WAIT_MS ); - }while (retry <MTK_BT_RESET_NUM_TRIES ); +if (val &MTK_BT_RST_DONE ) +bt_dev_dbg (hdev,"Bluetooth Reset Successfully" );btusb_mtk_id_get (data,0x70010200 , &val);if (!val)