Skip to contentSkip to conversation

SCMR[PLLMF] and HRCW for MPC8272

U-Boot-Users Bastos Fernandez Alexandre 2 participants 2 messages May 18, 2006 – May 19, 2006

lore
Share & tools
lore
#0 lore raw

Dmytro,

Quoted 23 lines

I am trying to bring up a custom 8272 board.
I set HRCW to 0x0A74B20A and on output I have

--8<---
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq
100-300
- dfbrg 1, corecnf 0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 2

  - vco_out  198000000, scc_clk   49500000, brg_clk   12375000
  - cpu_clk  264000000, cpm_clk   99000000, bus_clk   66000000

- pci_clk 33000000

CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
<HANGS HERE..>
--8<---

BUS_CLK=66MHz - Correct.
CPU_CLK=264MHz - Correct
BUSDF=5 - Wrong! Should be BUSDF=3
PLLMF=2 - Wrong! Should be PLLMF=3
CPM_CLK=99MHz - Wrong! Should be 132MHz
( PLLMF = 2(CPM_CLK/CLKIN)-1 => which gives us CPM_CLK = 99MHz )

Quoted 9 lines

The problem is that PLLMF should be 3 that will give us CPM_CLK=132MHz.

I am using MODCK_H=1010 and PCI_MODCK=0 which according to clock configuration for PCI host mode should give CPM multiplication factor equals 2 and PLLMF=3. But PLLMF still gives me 2!

Can anybody help me please, what I am missing? How do I get PLLMF=3 in SCMR?

In the Clock Configurations for PCI Host Mode and PCI_MODCK=0 in the Hadrware Specifications doc. from Freescale I couldn't find any options for MODCK_H=1010 and bus_CLK of 66MHz. Check this, maybe the problem is about that.

Couls you also check the MODCK[1-3] hardware pins and report?

Best regards

Alex BASTOS

#1 lore raw
Quoted 33 lines
Quoted 24 lines

I am trying to bring up a custom 8272 board.
I set HRCW to 0x0A74B20A and on output I have

--8<---
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq
100-300
- dfbrg 1, corecnf 0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 2

  - vco_out  198000000, scc_clk   49500000, brg_clk   12375000
  - cpu_clk  264000000, cpm_clk   99000000, bus_clk   66000000

- pci_clk 33000000

CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
<HANGS HERE..>
--8<---

BUS_CLK=66MHz - Correct.
CPU_CLK=264MHz - Correct
BUSDF=5 - Wrong! Should be BUSDF=3
PLLMF=2 - Wrong! Should be PLLMF=3
CPM_CLK=99MHz - Wrong! Should be 132MHz
( PLLMF = 2(CPM_CLK/CLKIN)-1 => which gives us CPM_CLK = 99MHz )

Quoted 9 lines

The problem is that PLLMF should be 3 that will give us CPM_CLK=132MHz.

I am using MODCK_H=1010 and PCI_MODCK=0 which according to clock configuration for PCI host mode should give CPM multiplication factor equals 2 and PLLMF=3. But PLLMF still gives me 2!

Can anybody help me please, what I am missing? How do I get PLLMF=3 in SCMR?

Quoted 6 lines

In the Clock Configurations for PCI Host Mode and PCI_MODCK=0 in the Hadrware Specifications doc. from Freescale I couldn't find any options for MODCK_H=1010 and bus_CLK of 66MHz. Check this, maybe the problem is about that.

Couls you also check the MODCK[1-3] hardware pins and report?

Thank you Alex,

You were right, my mistake. MODCK[1-3] hardware pins are '000' and for BUS_CLK of 66MHz I have chosen MODCK_H=0000 and it works now!

Thank you very much again,

Dimitry