SCMR[PLLMF] and HRCW for MPC8272
Dmytro,
Quoted 23 lines
I am trying to bring up a custom 8272 board.
I set HRCW to0x0A74B20Aand on output I have--8<---
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq
100-300
- dfbrg 1, corecnf0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 2- vco_out 198000000, scc_clk 49500000, brg_clk 12375000 - cpu_clk 264000000, cpm_clk 99000000, bus_clk 66000000-
pci_clk33000000CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
<HANGS HERE..>
--8<---BUS_CLK=66MHz - Correct.
CPU_CLK=264MHz - Correct
BUSDF=5 - Wrong! Should be BUSDF=3
PLLMF=2 - Wrong! Should be PLLMF=3
CPM_CLK=99MHz - Wrong! Should be 132MHz
( PLLMF = 2(CPM_CLK/CLKIN)-1 => which gives usCPM_CLK= 99MHz )
Quoted 9 lines
The problem is that PLLMF should be 3 that will give us CPM_CLK=132MHz.
I am using MODCK_H=1010 and PCI_MODCK=0 which according to clock configuration for PCI host mode should give CPM multiplication factor equals 2 and PLLMF=3. But PLLMF still gives me 2!
Can anybody help me please, what I am missing? How do I get PLLMF=3 in SCMR?
In the Clock Configurations for PCI Host Mode and PCI_MODCK=0 in the Hadrware Specifications doc. from Freescale I couldn't find any options for MODCK_H=1010 and bus_CLK of 66MHz. Check this, maybe the problem is about that.
Couls you also check the MODCK[1-3] hardware pins and report?
Best regards
Alex BASTOS
Quoted 33 lines
Quoted 24 lines
I am trying to bring up a custom 8272 board.
I set HRCW to0x0A74B20Aand on output I have--8<---
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq
100-300
- dfbrg 1, corecnf0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 2- vco_out 198000000, scc_clk 49500000, brg_clk 12375000 - cpu_clk 264000000, cpm_clk 99000000, bus_clk 66000000-
pci_clk33000000CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
<HANGS HERE..>
--8<---BUS_CLK=66MHz - Correct.
CPU_CLK=264MHz - Correct
BUSDF=5 - Wrong! Should be BUSDF=3
PLLMF=2 - Wrong! Should be PLLMF=3
CPM_CLK=99MHz - Wrong! Should be 132MHz
( PLLMF = 2(CPM_CLK/CLKIN)-1 => which gives usCPM_CLK= 99MHz )Quoted 9 lines
The problem is that PLLMF should be 3 that will give us CPM_CLK=132MHz.
I am using MODCK_H=1010 and PCI_MODCK=0 which according to clock configuration for PCI host mode should give CPM multiplication factor equals 2 and PLLMF=3. But PLLMF still gives me 2!
Can anybody help me please, what I am missing? How do I get PLLMF=3 in SCMR?
Quoted 6 lines
In the Clock Configurations for PCI Host Mode and PCI_MODCK=0 in the Hadrware Specifications doc. from Freescale I couldn't find any options for MODCK_H=1010 and
bus_CLKof 66MHz. Check this, maybe the problem is about that.Couls you also check the MODCK[1-3] hardware pins and report?
Thank you Alex,
You were right, my mistake. MODCK[1-3] hardware pins are '000' and for BUS_CLK of 66MHz I have chosen MODCK_H=0000 and it works now!
Thank you very much again,
Dimitry