Skip to contentSkip to conversation

pcmcia card not recognized with 2.6.18-rc1

DISCUSSION Luca Ognibene 1 participant 2 messages Jul 13, 2006

lore
Share & tools
lore
#0 lore raw

I've a "Onda N501HS" umts/gprs pcmcia card. I've attached it to the pci bus using a pci<->pcmcia card.
I've tested with two kernels, 2.6.8 (from debian sarge) and 2.6.18-rc1 (compiled). Both kernels can't recognize the card at the boot time, only the debian kernel can recognize it if i remove/reinsert it while the system is running.

Logs from 2.6.18-rc1: http://people.freedesktop.org/~skaboy/USB-2.6.18-rc1

Logs from 2.6.8 (debian sarge):
http://people.freedesktop.org/~skaboy/USB-2.6.8-debian

Motherboard: SiS-661
Distro: debian sarge

Tell me if you need more info/debug.

ciao
Luca

#1 lore raw
Quoted 7 lines · Luca Ognibene

I've a "Onda N501HS" umts/gprs pcmcia card. I've attached it to the pci bus using a pci<->pcmcia card.
I've tested with two kernels, 2.6.8 (from debian sarge) and 2.6.18-rc1 (compiled). Both kernels can't recognize the card at the boot time, only the debian kernel can recognize it if i remove/reinsert it while the system is running.

Quoted 8 lines

Logs from 2.6.18-rc1: http://people.freedesktop.org/~skaboy/USB-2.6.18-rc1

Logs from 2.6.8 (debian sarge):
http://people.freedesktop.org/~skaboy/USB-2.6.8-debian

Motherboard: SiS-661
Distro: debian sarge

more tests with different kernels:

 * 2.6.8         (no cold, yes hot)
 * 2.6.12        (no cold, yes hot)
 * 2.6.13.5      (no cold, yes hot)
 * 2.6.14.4      (no cold, yes hot)
 * 2.6.14.7      (no cold, yes hot)
 * 2.6.15        (no cold, no hot)
 * 2.6.16        (no cold, no hot)
 * 2.6.18-rc1    (no cold, no hot)

where "no cold" means the card is not recognized at boot and "yes hot" means the card is recognized if i remove/insert it when the system is running.
I'll try to debug it more but i don't really know what to do.. anyone can point me to the right direction?

Thanks
Luca