pcmcia card not recognized with 2.6.18-rc1
I've a "Onda N501HS" umts/gprs pcmcia card. I've attached it to the pci bus using a pci<->pcmcia card.
I've tested with two kernels, 2.6.8 (from debian sarge) and 2.6.18-rc1 (compiled). Both kernels can't recognize the card at the boot time, only the debian kernel can recognize it if i remove/reinsert it while the system is running.
Logs from 2.6.18-rc1: http://people.freedesktop.org/~skaboy/USB-2.6.18-rc1
Logs from 2.6.8 (debian sarge):
http://people.freedesktop.org/~skaboy/USB-2.6.8-debian
Motherboard: SiS-661
Distro: debian sarge
Tell me if you need more info/debug.
ciao
Luca
Quoted 7 lines · Luca Ognibene
I've a "Onda N501HS" umts/gprs pcmcia card. I've attached it to the pci bus using a pci<->pcmcia card.
I've tested with two kernels, 2.6.8 (from debian sarge) and 2.6.18-rc1 (compiled). Both kernels can't recognize the card at the boot time, only the debian kernel can recognize it if i remove/reinsert it while the system is running.
Quoted 8 lines
Logs from 2.6.18-rc1: http://people.freedesktop.org/~skaboy/USB-2.6.18-rc1
Logs from 2.6.8 (debian sarge):
http://people.freedesktop.org/~skaboy/USB-2.6.8-debianMotherboard: SiS-661
Distro: debian sarge
more tests with different kernels:
* 2.6.8 (no cold, yes hot) * 2.6.12 (no cold, yes hot) * 2.6.13.5 (no cold, yes hot) * 2.6.14.4 (no cold, yes hot) * 2.6.14.7 (no cold, yes hot) * 2.6.15 (no cold, no hot) * 2.6.16 (no cold, no hot) * 2.6.18-rc1 (no cold, no hot)
where "no cold" means the card is not recognized at boot and "yes hot" means the card is recognized if i remove/insert it when the system is running.
I'll try to debug it more but i don't really know what to do.. anyone can point me to the right direction?
Thanks
Luca