Skip to contentSkip to conversation

USB x-pad problems

Linux-usb-users Alan Stern 2 participants 4 messages Aug 8, 2006 – Aug 11, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Alan Stern

author
#1 lore raw
Quoted 9 lines · Christian Axelsson

Hello!

I'm having trouble connecting my X-box dancepad to my linux setup. I've attached the some logs. The intressting part is that it's working fine on all windows machines Ive tested on, including a dualboot using the same USB-port on the one where Ive captured these logs. Note that the xpad.working.dmesg is taken from another linux system where I managed to get it to work.

Quoted 3 lines

I've tried 2.6.17-gentoo-r4 and a vanilla 2.6.17.6 with the same results.

From your log, it looks like the computer has trouble communicating with

the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?

Alan Stern

#2 lore raw
Quoted 1 line · Alan Stern

From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?

From what I know this is directly into my computer (directly into the motherboard atleast :P).

--
Christian

author
#3 lore raw
Quoted 7 lines · Christian Axelsson
Quoted 3 lines · Alan Stern

From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?

From what I know this is directly into my computer (directly into the
motherboard atleast :P).

I guess the hub is built directly into the X-pad.

This may or may not help... If you build a kernel with CONFIG_USB_DEBUG set, the dmesg log will then contain more detailed information about what happens when you plug in the X-pad.

Alan Stern

#4 lore raw
Quoted 10 lines · Alan Stern
Quoted 4 lines · Christian Axelsson
Quoted 1 line · Alan Stern

From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?

From what I know this is directly into my computer (directly into the
motherboard atleast :P).

I guess the hub is built directly into the X-pad.

This may or may not help... If you build a kernel with CONFIG_USB_DEBUG set, the dmesg log will then contain more detailed information about what happens when you plug in the X-pad.

Said and done. The result, snipped from my kern.log (dmesg buffer got flooded) is attached... I dont really know what to make out of it except that it seems to verify that it the pad has it's own hub.

Signature · 1 line
Christian