USB x-pad problems
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Christian Axelsson
Hello!
I'm having trouble connecting my X-box dancepad to my linux setup. I've attached the some logs. The intressting part is that it's working fine on all windows machines Ive tested on, including a dualboot using the same USB-port on the one where Ive captured these logs. Note that the xpad.working.dmesg is taken from another linux system where I managed to get it to work.
Quoted 3 lines
I've tried 2.6.17-gentoo-r4 and a vanilla 2.6.17.6 with the same results.
From your log, it looks like the computer has trouble communicating with
the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?
Alan Stern
Quoted 1 line · Alan Stern
From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?
From what I know this is directly into my computer (directly into the motherboard atleast :P).
--
Christian
Quoted 7 lines · Christian Axelsson
Quoted 3 lines · Alan Stern
From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?
From what I know this is directly into my computer (directly into the
motherboard atleast :P).
I guess the hub is built directly into the X-pad.
This may or may not help... If you build a kernel with CONFIG_USB_DEBUG set, the dmesg log will then contain more detailed information about what happens when you plug in the X-pad.
Alan Stern
Quoted 10 lines · Alan Stern
Quoted 4 lines · Christian Axelsson
Quoted 1 line · Alan Stern
From your log, it looks like the computer has trouble communicating with the external hub. What happens if you plug the X-box dancepad directly into the computer, bypassing the hub?
From what I know this is directly into my computer (directly into the
motherboard atleast :P).I guess the hub is built directly into the X-pad.
This may or may not help... If you build a kernel with
CONFIG_USB_DEBUGset, the dmesg log will then contain more detailed information about what happens when you plug in the X-pad.
Said and done. The result, snipped from my kern.log (dmesg buffer got flooded) is attached... I dont really know what to make out of it except that it seems to verify that it the pad has it's own hub.
Signature · 1 line
Christian