Skip to contentSkip to conversation

power down regression: 2.6.18-rc5 against 2.6.18-rc4 on i386, 82371AB/EB/MB PIIX4

DISCUSSION ael 2 participants 2 messages Sep 1, 2006 – Sep 5, 2006 ACPI

lore
Share & tools
lore

ael

author
#0 lore raw

On 2.6.18-rc4 and all earlier versions, power-down is called when the system is shutdown: the last message on screen is Power down & shutdown.

On 2.6.18-rc5, there is no call to power down: the last message is "System Halted" and power remains on.

==========================================================================

i386 architecture, 440BX chipset:

---------------------------------------------------------------------
lspci:
=====
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
0000:00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
-------------------------------------------------------------------------

2.6.18-rc5 compiled with this .config:

http://homepage.ntlworld.com/lawrence_a_e/config_2.6.18-rc5

Above has no significant difference from .config used for 2.6.18-rc4:

---------------------------------------------------------------

$ diff linux-2.6.18-rc4/.config linux-2.6.18-rc5/.config
3,4c3,4
< # Linux kernel version: 2.6.18-rc4
< # Mon Aug 28 11:33:37 2006
---
Quoted 2 lines

# Linux kernel version: 2.6.18-rc5
# Thu Aug 31 19:50:52 2006

809a810

Quoted 1 line

# CONFIG_FIXED_PHY is not set

----------------------------------------------------------------

(Setting acpi debug has no effect even on screen.)

------------------------------------------------------------------------------

$ gcc --version
gcc (GCC) 3.3.5 (Debian 1:3.3.5-13)

------------------------------------------------------------------------------

/proc/cpuinfo:-
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 300.045
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat p
se36 mmx fxsr
bogomips : 600.69
----------------------------------------------------------------------------------------------

Adrian Lawrence.

#1 lore raw
Quoted 5 lines · ael

On 2.6.18-rc4 and all earlier versions, power-down is called when the
system is shutdown: the last message on screen is Power down & shutdown.

On 2.6.18-rc5, there is no call to power down: the last message is "System Halted" and power remains on.

Sounds like a regression. Please file a bug on bugzilla.kernel.org if it is ACPI related, please put it in ACPI category.

Thanks,
Luming