power down regression: 2.6.18-rc5 against 2.6.18-rc4 on i386, 82371AB/EB/MB PIIX4
On 2.6.18-rc4 and all earlier versions, power-down is called when the system is shutdown: the last message on screen is Power down & shutdown.
On 2.6.18-rc5, there is no call to power down: the last message is "System Halted" and power remains on.
==========================================================================
i386 architecture, 440BX chipset:
---------------------------------------------------------------------
lspci:
=====
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
0000:00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
-------------------------------------------------------------------------
2.6.18-rc5 compiled with this .config:
http://homepage.ntlworld.com/lawrence_a_e/config_2.6.18-rc5
Above has no significant difference from .config used for 2.6.18-rc4:
---------------------------------------------------------------
$ diff linux-2.6.18-rc4/.config linux-2.6.18-rc5/.config 3,4c3,4 < # Linux kernel version: 2.6.18-rc4 < # Mon Aug 28 11:33:37 2006 ---
Quoted 2 lines
# Linux kernel version: 2.6.18-rc5
# Thu Aug 31 19:50:52 2006
809a810
Quoted 1 line
#
CONFIG_FIXED_PHYis not set
----------------------------------------------------------------
(Setting acpi debug has no effect even on screen.)
------------------------------------------------------------------------------
$ gcc --version gcc (GCC) 3.3.5 (Debian 1:3.3.5-13)
------------------------------------------------------------------------------
/proc/cpuinfo:-
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 300.045
cache size : 512 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat p
se36 mmx fxsr
bogomips : 600.69
----------------------------------------------------------------------------------------------
Adrian Lawrence.
Quoted 5 lines · ael
On 2.6.18-rc4 and all earlier versions, power-down is called when the
system is shutdown: the last message on screen is Power down & shutdown.On 2.6.18-rc5, there is no call to power down: the last message is "System Halted" and power remains on.
Sounds like a regression. Please file a bug on bugzilla.kernel.org if it is ACPI related, please put it in ACPI category.
Thanks,
Luming