Sempron 2800+
Hello,
I am using kernel version 2.6.17.11 with built-in cpufreq support on a AMD Sempron 2800+. However, I do not have the directory /sys/devices/system/cpu/cpu0/cpufreq/
Can anybody tell me why? Does my cpu not support cpufreq or have i forgotten to select some kernel modules/configuration?
Cheers,
Arik
Quoted 6 lines
I am using kernel version 2.6.17.11 with built-in cpufreq support on a AMD Sempron 2800+. However, I do not have the directory
/sys/devices/system/cpu/cpu0/cpufreq/Can anybody tell me why? Does my cpu not support cpufreq or have i forgotten to select some kernel modules/configuration?
What does dmesg | grep powern report?
I suspect that your Sempron doesn't have the bit enabled that tells the driver it supports PowerNow!. Thus, the driver doesn't load. I haven't had a chance to determine if there's a large batch of Sempron 2800s that don't support PN!, or if they just use a different bit to indicate that support.
-Mark Langsdorf
AMD, Inc.
Quoted 7 lines · Mark
Quoted 6 lines
I am using kernel version 2.6.17.11 with built-in cpufreq support on a AMD Sempron 2800+. However, I do not have the directory
/sys/devices/system/cpu/cpu0/cpufreq/Can anybody tell me why? Does my cpu not support cpufreq or have i forgotten to select some kernel modules/configuration?
Quoted 8 lines
What does
dmesg | grep powernreport?I suspect that your Sempron doesn't have the bit enabled that tells the driver it supports PowerNow!. Thus, the driver doesn't load. I haven't had a chance to determine if there's a large batch of Sempron 2800s that don't support PN!, or if they just use a different bit to indicate that support.
dmesg | grep powern reports nothing at all... Is that supposed to be a good or bad thing? I fear for the latter. ;-)
Is there anything else I could provide to help with diagnosis?
Regards,
Arik