Skip to contentSkip to conversation

kernel starting...

U-Boot-Users Hurricane555 2 participants 3 messages May 24, 2006 – May 25, 2006

lore
Share & tools
lore
#0 lore raw

My U-BOOT seems to be running!

(U_BOOT 1.1.4 and linux 2.6.10)

Now I?m trying to run linux on my ARM board but I get no output on my console!
What params I?ve to pass from U-BOOT to Linux to become an output ?

U-boot is uncompressing Kernelheader and shows kernel starting...

I read the faq

http://www.denx.de/wiki/view/DULG/LinuxKernelIgnoresMyBootargs

http://www.denx.de/wiki/view/DULG/LinuxUncompressingError

I tried to load the Image on a higher RAM addres. But not effect! I is still the same problem.

http://www.denx.de/wiki/view/DULG/LinuxHangsAfterUncompressingKernel

I couldn?t found IMAP_ADDR and CFG_IMMR

At the moment I?m not using any fs!
--
View this message in context: http://www.nabble.com/kernel+starting...-t1676914.html#a4547030
Sent from the Uboot - Users forum at Nabble.com.

#1 lore raw
Quoted 10 lines · Hurricane555 wrote:

My U-BOOT seems to be running!

(U_BOOT 1.1.4 and linux 2.6.10)

Now I?m trying to run linux on my ARM board but I get no output on my console!
What params I?ve to pass from U-BOOT to Linux to become an output ?

U-boot is uncompressing Kernelheader and shows kernel starting...

For example, Set 'console=/dev/ttyS0,115200' from the bootargs.

Kevin

#2 lore raw
Quoted 1 line
Quoted 1 line

For example, Set 'console=/dev/ttyS0,115200' from the bootargs.

I already inserted this line! my console is like this:

console=/dev/ttyS0,9600

Any other Bootargs or some thing else?

Is this CONFIG_SERIAL_TAG also necessary?
--
View this message in context: http://www.nabble.com/kernel+starting...-t1676914.html#a4556222
Sent from the Uboot - Users forum at Nabble.com.