Skip to contentSkip to conversation

How to use UBoot for S3CEB2410 board

U-Boot-Users thien van 2 participants 2 messages Nov 1, 2006

lore
Share & tools
lore

thien van

author
#0 lore raw

Hi all,

I have bought a board at http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did:

[root at nvthien u-boot-1.1.5]# make smdk2410_config

Configuring for smdk2410 board...

[root at nvthien u-boot-1.1.5]# make CROSS_COMPILE=arm-linux-

...

-Map u-boot.map -o u-boot

arm-linux-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec

arm-linux-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin

[root at nvthien u-boot-1.1.5]# ls -al u-boot*

-rwxr-xr-x 1 root root 584411 Oct 26 14:48 u-boot

-rwxr-xr-x 1 root root 96596 Oct 26 14:48 u-boot.bin

-rw-r--r-- 1 root root 79941 Oct 26 14:48 u-boot.map

-rwxr-xr-x 1 root root 289882 Oct 26 14:48 u-boot.srec

[root at nvthien u-boot-1.1.5]#

After that I use Dnw program to down load u-boot.bin file at 0x30100000, and

download & run at 0x30000000 file NandFlash_WR to write u-boot.bin to SMC:

...

Download&Run is selected.

USB host is connected. Waiting a download.

Now, Downloading [ADDRESS:30000000h,TOTAL:25234]

RECEIVED FILE SIZE: 25234(312.3KB/S,0.1S)

Now, Checksum calculation

Download O.K.

S3C2410 Test Program Ver 0.00 FCLK=200000000

0:NAND View Badblk 1:NAND View page 2:NAND Program 3:NAND Erase All

Select the function to test?2

[SMC(K9S1208V0M) NAND Flash writing program]

the data must be downloaded using ICE from 30100000h

Source size:0h~0h

Available target block number: 0~4095

Input target block number:0

Input target size(0x4000*n):96606

source base address(0x3010000x)=0x30100000

target start block number =0

target size (0x4000*n) =0x1795e

............................................................................................................................................................................................

And I reset the board to boot from UBoot but it does not work.????. Please help me how to use it.

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061101/658e229d/attachment.htm

#1 lore raw

thien van ha scritto:

Quoted 3 lines

Hi all,

I have bought a board at http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did:

.snip.

Hi,
it's a normal behaviour because smdk2410_config is targeted for Samsung Evaluation Board.
You must customize U-Boot for your board, if you need commercial support we can do that for you ;-)

regards,

Signature · 7 lines
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
  - Atmel Third Party Consultant
  - Intel PCA Developer Network Member
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com   |    www.KaeilOS.com