Skip to contentSkip to conversation

how to and a new component such as super io chip in u-boot?

U-Boot-Users wang20060523 2 participants 2 messages Nov 11, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

I am a newbie to u-boot and i need to use a super io chip w83977 from winbond to add more uart to my board using a s3c2410 ,so how to add the component to u-boot so I can test the addtional uart port in booting stage?

Write a driver for it.

And please make sure to adhere to the Netiquette - restrict your line length to 70 chars max. And please read
http://www.catb.org/%7eesr/faqs/smart-questions.html

Quoted 3 lines

--Boundary-=_OGaKGcOSgOAnfXYStpCOxyLHHuxb
Content-Type: text/html; charset="gb2312"
Content-Transfer-Encoding: quoted-printable

And NEVER EVER post HTML on this list!!!

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hegel was right when he said that we learn from history that man  can
never learn anything from history.              - George Bernard Shaw