how to and a new component such as super io chip in u-boot?
I am a newbie to u-boot and i need to use a super io chip w83977 from winbond to add more uart to my board using a s3c2410 ,so how to add the component to u-boot so I can test the addtional uart port in booting stage?
best wishes
tony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061111/52de5123/attachment.htm
Quoted 2 lines · In message <[email protected]> you wrote:
I am a newbie to u-boot and i need to use a super io chip w83977 from winbond to add more uart to my board using a s3c2410 ,so how to add the component to u-boot so I can test the addtional uart port in booting stage?
Write a driver for it.
And please make sure to adhere to the Netiquette - restrict your line length to 70 chars max. And please read
http://www.catb.org/%7eesr/faqs/smart-questions.html
Quoted 3 lines
--Boundary-=_OGaKGcOSgOAnfXYStpCOxyLHHuxb
Content-Type: text/html; charset="gb2312"
Content-Transfer-Encoding: quoted-printable
And NEVER EVER post HTML on this list!!!
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Hegel was right when he said that we learn from history that man can never learn anything from history. - George Bernard Shaw