"kernel + gcc 4.1 = several problems" / "Oops in 2.6.19.1"
Hello,
I just read about the subjects.
I have a firewall which has some issues.
First it was a VIA CL6000 (c3).
Now it is a EK8000 (c3-2) with different power supply, RAM and board of course. Still I see strange things sometimes. Crashes, hangs, etc. Now and then. Not too often.
I have in .config:CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_MVIAC3_2=y
Does this mean the issue applies to my own kernels?
Udo
Quoted 9 lines · Udo van den Heuvel
Hello,
I just read about the subjects.
I have a firewall which has some issues.
First it was a VIA CL6000 (c3).
Now it is a EK8000 (c3-2) with different power supply, RAM and board of course. Still I see strange things sometimes. Crashes, hangs, etc. Now and then. Not too often.
Quoted 5 lines
I have in .config:
CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_MVIAC3_2=yDoes this mean the issue applies to my own kernels?
It could be.
Or it could be something completely different.
If the same kernel compiled with gcc 3.4.6 works fine, you might run into one of the mysterious problems with gcc 4.1.
It could also be hardware problems (e.g. try running memtest86 for a longer time).
Does the machine hang completely, or is any useful information like e.g. an oops available?
Quoted 1 line
Udo
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed