Skip to contentSkip to conversation

"kernel + gcc 4.1 = several problems" / "Oops in 2.6.19.1"

DISCUSSION Udo van den Heuvel 2 participants 2 messages Jan 3, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I just read about the subjects.
I have a firewall which has some issues.
First it was a VIA CL6000 (c3).
Now it is a EK8000 (c3-2) with different power supply, RAM and board of course. Still I see strange things sometimes. Crashes, hangs, etc. Now and then. Not too often.

I have in .config:
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_MVIAC3_2=y

Does this mean the issue applies to my own kernels?

Udo

#1 lore raw
Quoted 9 lines · Udo van den Heuvel

Hello,

I just read about the subjects.
I have a firewall which has some issues.
First it was a VIA CL6000 (c3).
Now it is a EK8000 (c3-2) with different power supply, RAM and board of course. Still I see strange things sometimes. Crashes, hangs, etc. Now and then. Not too often.

Quoted 5 lines

I have in .config:
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_MVIAC3_2=y

Does this mean the issue applies to my own kernels?

It could be.
Or it could be something completely different.

If the same kernel compiled with gcc 3.4.6 works fine, you might run into one of the mysterious problems with gcc 4.1.

It could also be hardware problems (e.g. try running memtest86 for a longer time).

Does the machine hang completely, or is any useful information like e.g. an oops available?

Quoted 1 line

Udo

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed