Add PCI Subsystem IDs
PATCH 1/1 Add PCI Subsystem IDs
Hi,
This patch adds PCI Subsystem IDs to qemu's emulated devices.
please apply,
Gerd
Signature · 1 line
Gerd Hoffmann <[email protected]>
Add PCI subsystem ID
This patch adds the PCI Subsystem ID 5853:0001 to the virtual devices emulated by qemu (ide, nic, vga).
Signed-off-by Gerd Hoffmann <[email protected]>
--- tools/ioemu/hw/cirrus_vga.c | 4 ++++ tools/ioemu/hw/ide.c | 4 ++++ tools/ioemu/hw/rtl8139.c | 6 ++++-- 3 files changed, 12 insertions(+), 2 deletions(-)
tools/ioemu/hw/rtl8139.c +4 -2
@@ -3423,8 +3423,10 @@ void pci_rtl8139_init(PCIBus *bus, NICIn pci_conf[0x0e ] =0x00 ;/* header_type */ pci_conf[0x3d ] =1 ;/* interrupt pin 0 */ pci_conf[0x34 ] =0xdc ; - pci_conf[0x2c ] = pci_conf[0x00 ];// same as Vendor ID - pci_conf[0x2d ] = pci_conf[0x01 ]; + pci_conf[0x2c ] =0x53 ;/* subsystem vendor: XenSource */ + pci_conf[0x2d ] =0x58 ; + pci_conf[0x2e ] =0x01 ;/* subsystem device */ + pci_conf[0x2f ] =0x00 ; s = &d->rtl8139;
tools/ioemu/hw/cirrus_vga.c +4 -0
@@ -3340,6 +3340,10 @@ void pci_cirrus_vga_init(PCIBus *bus, Di pci_conf[0x0a ] =PCI_CLASS_SUB_VGA ; pci_conf[0x0b ] =PCI_CLASS_BASE_DISPLAY ; pci_conf[0x0e ] = PCI_CLASS_HEADERTYPE_00h; + pci_conf[0x2c ] =0x53 ;/* subsystem vendor: XenSource */ + pci_conf[0x2d ] =0x58 ; + pci_conf[0x2e ] =0x01 ;/* subsystem device */ + pci_conf[0x2f ] =0x00 ;/* setup VGA */ s = &d->cirrus_vga;
tools/ioemu/hw/ide.c +4 -0
@@ -2502,6 +2502,10 @@ void pci_piix3_ide_init(PCIBus *bus, Blo pci_conf[0x0a ] =0x01 ;// class_sub = PCI_IDE pci_conf[0x0b ] =0x01 ;// class_base = PCI_mass_storage pci_conf[0x0e ] =0x00 ;// header_type + pci_conf[0x2c ] =0x53 ;/* subsystem vendor: XenSource */ + pci_conf[0x2d ] =0x58 ; + pci_conf[0x2e ] =0x01 ;/* subsystem device */ + pci_conf[0x2f ] =0x00 ;pci_register_io_region ((PCIDevice *)d,4 ,0x10 ,PCI_ADDRESS_SPACE_IO , bmdma_map);
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel