Skip to contentSkip to conversation

Add PCI Subsystem IDs

PATCH New Gerd Hoffmann 1 participant 1 message Feb 7, 2007

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add PCI Subsystem IDs

Hi,

This patch adds PCI Subsystem IDs to qemu's emulated devices.

please apply,
Gerd

Signature · 1 line
Gerd Hoffmann <[email protected]>

Add PCI subsystem ID

This patch adds the PCI Subsystem ID 5853:0001 to the virtual devices emulated by qemu (ide, nic, vga).

---
 tools/ioemu/hw/cirrus_vga.c |    4 ++++
 tools/ioemu/hw/ide.c        |    4 ++++
 tools/ioemu/hw/rtl8139.c    |    6 ++++--
 3 files changed, 12 insertions(+), 2 deletions(-)
tools/ioemu/hw/rtl8139.c +4 -2
Index: build-32-unstable-13800/tools/ioemu/hw/rtl8139.c
===================================================================
@@ -3423,8 +3423,10 @@ void pci_rtl8139_init(PCIBus *bus, NICIn
     pci_conf[0x0e] = 0x00; /* header_type */
     pci_conf[0x3d] = 1;    /* interrupt pin 0 */
     pci_conf[0x34] = 0xdc;
-    pci_conf[0x2c] = pci_conf[0x00]; // same as Vendor ID
-    pci_conf[0x2d] = pci_conf[0x01];
+    pci_conf[0x2c] = 0x53; /* subsystem vendor: XenSource */
+    pci_conf[0x2d] = 0x58;
+    pci_conf[0x2e] = 0x01; /* subsystem device */
+    pci_conf[0x2f] = 0x00;
 
     s = &d->rtl8139;
 
tools/ioemu/hw/cirrus_vga.c +4 -0
Index: build-32-unstable-13800/tools/ioemu/hw/cirrus_vga.c
===================================================================
@@ -3340,6 +3340,10 @@ void pci_cirrus_vga_init(PCIBus *bus, Di
     pci_conf[0x0a] = PCI_CLASS_SUB_VGA;
     pci_conf[0x0b] = PCI_CLASS_BASE_DISPLAY;
     pci_conf[0x0e] = PCI_CLASS_HEADERTYPE_00h;
+    pci_conf[0x2c] = 0x53; /* subsystem vendor: XenSource */
+    pci_conf[0x2d] = 0x58;
+    pci_conf[0x2e] = 0x01; /* subsystem device */
+    pci_conf[0x2f] = 0x00;
 
     /* setup VGA */
     s = &d->cirrus_vga;
tools/ioemu/hw/ide.c +4 -0
Index: build-32-unstable-13800/tools/ioemu/hw/ide.c
===================================================================
@@ -2502,6 +2502,10 @@ void pci_piix3_ide_init(PCIBus *bus, Blo
     pci_conf[0x0a] = 0x01; // class_sub = PCI_IDE
     pci_conf[0x0b] = 0x01; // class_base = PCI_mass_storage
     pci_conf[0x0e] = 0x00; // header_type
+    pci_conf[0x2c] = 0x53; /* subsystem vendor: XenSource */
+    pci_conf[0x2d] = 0x58;
+    pci_conf[0x2e] = 0x01; /* subsystem device */
+    pci_conf[0x2f] = 0x00;
 
     pci_register_io_region((PCIDevice *)d, 4, 0x10, 
                            PCI_ADDRESS_SPACE_IO, bmdma_map);

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel