Skip to contentSkip to conversation

u-boot

U-Boot-Users Harshad Poshtiwala 2 participants 2 messages Feb 12, 2007 – Feb 13, 2007

lore
Share & tools
lore
#0 lore raw

Hi Friends,

I am 1st time user of u-boot.
I am to bring up arm-based board. i.e my target board is going to be based on ARM architecture/

I follwed the following steps.
1,I installed precompiled tool chain on my machine 2,Built / compile linux kernel.
3,IBuilt / compile u-boot.

Now what should be the next step?

Is there any document availble to tell me the exact procedure for this.

I am on linux -redhat -enterprise machine. kernel version 2.6

I would appreciate your rely.

Regards
Harsh

#1 lore raw

Dear Harshad,

Quoted 10 lines · Harshad Poshtiwala

I am 1st time user of u-boot.
I am to bring up arm-based board. i.e my target board is going to be based on ARM architecture/

I follwed the following steps.
1,I installed precompiled tool chain on my machine 2,Built / compile linux kernel.
3,IBuilt / compile u-boot.

Now what should be the next step?

Run U-Boot and then run Linux.

Quoted 1 line

Is there any document availble to tell me the exact procedure for this.

Sure, the U-Boot sources contain a very nice README, and for more Information you can take a look at the DULG:

http://www.denx.de/wiki/DULG/WebHome

Regards

Markus Klotzbuecher