Skip to contentSkip to conversation

ipp2p problems

LARTC J.E. 4 participants 6 messages Mar 14, 2007 – Mar 16, 2007

lore
Share & tools
lore

J.E.

author
#0 lore raw

Hello list,

I'm newbie in this list. Well, i'm going crazy with ipp2p. Googling i find a mini-howto but i've got problems.

1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) Edit Makefile, if it's necesary:
* IPTABLES_SRC = /usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --help

root@servidor:/usr/src/ipp2p-0.8.0# make
make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 
modules
make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'
   CC [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.o
   Building modules, stage 2.
   MODPOST
   CC      /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o
   LD [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko
make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'
gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include 
-fPIC -c  libipt_ipp2p.c
ld -shared -o libipt_ipp2p.so libipt_ipp2p.o

Seems that all it's ok...
.
.
.
But ...

root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables: match `ipp2p' v (I'm v1.3.1).

Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)

root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p 
-j DROP
iptables: match `ipp2p' v (I'm v1.3.1).

Only one line, again.

root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD
Chain FORWARD (policy DROP)
target     prot opt source               destination
DROP      !icmp --  anywhere             anywhere            state INVALID
eth0_fwd   all  --  anywhere             anywhere
eth1_fwd   all  --  anywhere             anywhere
Reject     all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            limit: avg 
5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'
reject     all  --  anywhere             anywhere

I don't see anything of ipp2p.
(In Spanish: Nada por aquí nada por allá :) )

Always i get the same results with:

Ubuntu Dapper
Kernels: 2.6.15-27-386, 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0

Ubuntu Breezy (i think)
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0

I don't know what's going on. Any ideas?

Thank you all
Juanen
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 6 lines · J.E.

root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables: match `ipp2p' v (I'm v1.3.1).

Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)

You are running iptables version 1.3.1, and this is not the version you compiled ipp2p for (1.3.3)
What is the output of the ipp2p make install?

-- Marco

root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p
Quoted 40 lines

-j DROP
iptables: match `ipp2p' v (I'm v1.3.1).

Only one line, again.

root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD
Chain FORWARD (policy DROP)
target     prot opt source               destination
DROP      !icmp --  anywhere             anywhere            state INVALID
eth0_fwd   all  --  anywhere             anywhere
eth1_fwd   all  --  anywhere             anywhere
Reject     all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            limit: avg
5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'
reject     all  --  anywhere             anywhere

I don't see anything of ipp2p.
(In Spanish: Nada por aquí nada por allá :) )

Always i get the same results with:

Ubuntu Dapper
Kernels: 2.6.15-27-386, 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0

Ubuntu Breezy (i think)
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0

I don't know what's going on. Any ideas?

Thank you all
Juanen
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Signature · 1 line
Marco

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

author
#2 lore raw
In reply to J.E.

Thank you Marco.

Quoted 1 line
Quoted 1 line

You are running iptables version 1.3.1, and this is not the version

you compiled ipp2p for (1.3.3)

But I make a mistake in my explanation. I've mixed the results of Ubuntu Dapper with results of Ubuntu Breezy, sorry. Instead of 1.3.1 should it would have to put 1.3.3. In any case I will verify it. But i'm sure at 99% that i've used the correct source code.

Quoted 1 line
Quoted 1 line

What is the output of the ipp2p make install?

I don't made "make install". Is it necesary?

Simply i made

5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter

May be I need to recompile iptables?
I'm using the same version of iptables debian packet, to compile ipp2p. May be it's a silly question, but now i doubt of everything. ;)

First time:
-----------
Compiled in Ubuntu Dapper
Kernel: 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0

Second time:
------------
Compiled in Ubuntu Dapper
Kernel: 2.6.15-27-386
iptables: 1.3.3
ipp2p: 0.8.0

Third time:
------------
Compiled in Ubuntu Breezy
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0

--------------------

This would be the correct explanation.

1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) Edit Makefile, if it's necesary:
* IPTABLES_SRC = /usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --help

root@servidor:/usr/src/ipp2p-0.8.0# make
make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 
modules
make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'
   CC [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.o
   Building modules, stage 2.
   MODPOST
   CC      /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o
   LD [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko
make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'
gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include 
-fPIC -c  libipt_ipp2p.c
ld -shared -o libipt_ipp2p.so libipt_ipp2p.o

Seems that all it's ok...
.
.
.
But ...

root at servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables: match `ipp2p' v (I'm v1.3.3). <--- mistake

Only i get this line, iptables: match `ipp2p' v (I'm v1.3.3) <--- mistake

root at servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP
iptables: match `ipp2p' v (I'm v1.3.3). <--- mistake

Only one line, again.

root at servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP)

target     prot opt source               destination
DROP      !icmp --  anywhere             anywhere            state INVALID
eth0_fwd   all  --  anywhere             anywhere
eth1_fwd   all  --  anywhere             anywhere
Reject     all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            limit: avg

5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'
reject all -- anywhere anywhere

I don't see anything of ipp2p.

Thank you.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

author
#3 lore raw
In reply to J.E.
Quoted 1 line
Quoted 1 line

What is the output of the ipp2p make install?

When i 'make install'

root@servidor:/usr/src/ipp2p-0.8.0# make install
make: *** No hay ninguna regla para construir el objetivo `install'.  Alto.

This is the answer

make: *** There's no rules to build `install' object. Stop.

Logs don't give me any clue.

Any ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#4 lore raw
In reply to J.E.

Hi

This is my small guide (in spanish) for compile ipp2p with iptables, I think that you have these errors because the script is looking for files in other directories. I had had similars problems, I suggest you that install it over a clon of redhat(centos, whitebox). I have installed it in these distributions and I does not have problems more.

Guide IPP2P

Para esto uso el ipp2p, aqui esta el procedimiento de como instalarlo:
Tengo iptables instalado en rpm, extraer la version

#iptables -V

En un directorio especifico puede ser /opt o /tmp descomprime el ipp2p y las fuentes de mi iptables. Baje la version correspondiente de mi iptables-miversion.tar.gz desde la pagina de NETFILTER (ftp.netfilter.org)

Luego te vas al directorio del ipp2p
En el Makefile del ipp2p editar los siguientes parametros IPTABLES_BIN = /usr/sbin/iptables
IPTABLES_SRC = /tmp/iptables-1.3.1
Luego hacer un

# make

Se crean los siguientes archivos en el directorio del ipp2p:
libipt_ipp2p.so
libipt_ipp2p.o
ipt_ipp2p.o

El archivo libipt_ipp2p.so moverlo a /lib/iptables
Copiar los otros dos al /lib/modules/2.4.20-8/kernel/net/ipv4/netfilter luego hacer un

# depmod -a

Listo para definir una regla que bloquee todo el trafico P2P de kazza, ares, etc

# iptables -A FORWARD -m ipp2p --ipp2p -j DROP
Quoted 19 lines · J.E.
Quoted 1 line
Quoted 1 line

What is the output of the ipp2p make install?

When i 'make install'

root@servidor:/usr/src/ipp2p-0.8.0# make install
make: *** No hay ninguna regla para construir el objetivo `install'.  Alto.

This is the answer

make: *** There's no rules to build `install' object. Stop.

Logs don't give me any clue.

Any ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Signature · 5 lines
"The network is the computer"
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#5 lore raw
In reply to J.E.
Quoted 42 lines · J.E.

Hello list,

I'm newbie in this list. Well, i'm going crazy with ipp2p. Googling i find a mini-howto but i've got problems.

1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) Edit Makefile, if it's necesary:
* IPTABLES_SRC = /usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --help

root@servidor:/usr/src/ipp2p-0.8.0# make
make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0
modules
make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386'
   CC [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.o
   Building modules, stage 2.
   MODPOST
   CC      /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o
   LD [M]  /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko
make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386'
gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include
-fPIC -c  libipt_ipp2p.c
ld -shared -o libipt_ipp2p.so libipt_ipp2p.o

Seems that all it's ok...
.
.
.
But ...

Quoted 8 lines
root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables: match `ipp2p' v (I'm v1.3.1).

Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)

root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p
-j DROP
iptables: match `ipp2p' v (I'm v1.3.1).

ipp2p wasn't able to detect your current iptables versión number at compile time, that's why you see a 'v' character with nothing behind. Edit the ipp2p Makefile, and make shure that it finds your iptables versión number.

Do a make clean and rebuild.

Signature · 5 lines
Luciano
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc