ipp2p problems
Hello list,
I'm newbie in this list. Well, i'm going crazy with ipp2p. Googling i find a mini-howto but i've got problems.
1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) Edit Makefile, if it's necesary:
* IPTABLES_SRC = /usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --help
root@servidor:/usr/src/ipp2p-0.8.0# make make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 modules make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386' CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o Building modules, stage 2. MODPOST CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386' gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include -fPIC -c libipt_ipp2p.c ld -shared -o libipt_ipp2p.so libipt_ipp2p.o
Seems that all it's ok...
.
.
.
But ...
root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help iptables: match `ipp2p' v (I'm v1.3.1).
Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)
root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP iptables: match `ipp2p' v (I'm v1.3.1).
Only one line, again.
root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP) target prot opt source destination DROP !icmp -- anywhere anywhere state INVALID eth0_fwd all -- anywhere anywhere eth1_fwd all -- anywhere anywhere Reject all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg 5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:' reject all -- anywhere anywhere
I don't see anything of ipp2p.
(In Spanish: Nada por aquí nada por allá :) )
Always i get the same results with:
Ubuntu Dapper
Kernels: 2.6.15-27-386, 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0
Ubuntu Breezy (i think)
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0
I don't know what's going on. Any ideas?
Thank you all
Juanen
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 6 lines · J.E.
root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help iptables: match `ipp2p' v (I'm v1.3.1).Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)
You are running iptables version 1.3.1, and this is not the version you compiled ipp2p for (1.3.3)
What is the output of the ipp2p make install?
-- Marco
root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p
Quoted 40 lines
-j DROP
iptables: match `ipp2p' v (I'm v1.3.1).Only one line, again.
root@servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP) target prot opt source destination DROP !icmp -- anywhere anywhere state INVALID eth0_fwd all -- anywhere anywhere eth1_fwd all -- anywhere anywhere Reject all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg 5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:' reject all -- anywhere anywhereI don't see anything of ipp2p.
(In Spanish: Nada por aquí nada por allá :) )Always i get the same results with:
Ubuntu Dapper
Kernels: 2.6.15-27-386, 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0Ubuntu Breezy (i think)
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0I don't know what's going on. Any ideas?
Thank you all
Juanen
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 1 line
Marco
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Thank you Marco.
Quoted 1 line
Quoted 1 line
You are running iptables version 1.3.1, and this is not the version
you compiled ipp2p for (1.3.3)
But I make a mistake in my explanation. I've mixed the results of Ubuntu Dapper with results of Ubuntu Breezy, sorry. Instead of 1.3.1 should it would have to put 1.3.3. In any case I will verify it. But i'm sure at 99% that i've used the correct source code.
Quoted 1 line
Quoted 1 line
What is the output of the ipp2p make install?
I don't made "make install". Is it necesary?
Simply i made
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
May be I need to recompile iptables?
I'm using the same version of iptables debian packet, to compile ipp2p. May be it's a silly question, but now i doubt of everything. ;)
First time:
-----------
Compiled in Ubuntu Dapper
Kernel: 2.6.15-28-386
iptables: 1.3.3
ipp2p: 0.8.0
Second time:
------------
Compiled in Ubuntu Dapper
Kernel: 2.6.15-27-386
iptables: 1.3.3
ipp2p: 0.8.0
Third time:
------------
Compiled in Ubuntu Breezy
Kernel: 2.6.12-10-386
iptables: 1.3.1
ipp2p: 0.8.0
--------------------
This would be the correct explanation.
1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) Edit Makefile, if it's necesary:
* IPTABLES_SRC = /usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so /lib/iptables
6) cp ipt_ipp2p.ko /lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --help
root@servidor:/usr/src/ipp2p-0.8.0# make make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 modules make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386' CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o Building modules, stage 2. MODPOST CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386' gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include -fPIC -c libipt_ipp2p.c ld -shared -o libipt_ipp2p.so libipt_ipp2p.o
Seems that all it's ok...
.
.
.
But ...
root at servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help
iptables: match `ipp2p' v (I'm v1.3.3). <--- mistake
Only i get this line, iptables: match `ipp2p' v (I'm v1.3.3) <--- mistake
root at servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP
iptables: match `ipp2p' v (I'm v1.3.3). <--- mistake
Only one line, again.
root at servidor:/usr/src/ipp2p-0.8.0# iptables -L FORWARD Chain FORWARD (policy DROP)
target prot opt source destination DROP !icmp -- anywhere anywhere state INVALID eth0_fwd all -- anywhere anywhere eth1_fwd all -- anywhere anywhere Reject all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg
5/min burst 2 LOG level info prefix `Shorewall:FORWARD:REJECT:'
reject all -- anywhere anywhere
I don't see anything of ipp2p.
Thank you.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 1 line
Quoted 1 line
What is the output of the ipp2p make install?
When i 'make install'
root@servidor:/usr/src/ipp2p-0.8.0# make install make: *** No hay ninguna regla para construir el objetivo `install'. Alto.
This is the answer
make: *** There's no rules to build `install' object. Stop.
Logs don't give me any clue.
Any ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi
This is my small guide (in spanish) for compile ipp2p with iptables, I think that you have these errors because the script is looking for files in other directories. I had had similars problems, I suggest you that install it over a clon of redhat(centos, whitebox). I have installed it in these distributions and I does not have problems more.
Guide IPP2P
Para esto uso el ipp2p, aqui esta el procedimiento de como instalarlo:
Tengo iptables instalado en rpm, extraer la version
#iptables -V
En un directorio especifico puede ser /opt o /tmp descomprime el ipp2p y las fuentes de mi iptables. Baje la version correspondiente de mi iptables-miversion.tar.gz desde la pagina de NETFILTER (ftp.netfilter.org)
Luego te vas al directorio del ipp2p
En el Makefile del ipp2p editar los siguientes parametros IPTABLES_BIN = /usr/sbin/iptablesIPTABLES_SRC = /tmp/iptables-1.3.1
Luego hacer un
# make
Se crean los siguientes archivos en el directorio del ipp2p:
libipt_ipp2p.so
libipt_ipp2p.o
ipt_ipp2p.o
El archivo libipt_ipp2p.so moverlo a /lib/iptables
Copiar los otros dos al /lib/modules/2.4.20-8/kernel/net/ipv4/netfilter luego hacer un
# depmod -a
Listo para definir una regla que bloquee todo el trafico P2P de kazza, ares, etc
# iptables -A FORWARD -m ipp2p --ipp2p -j DROP
Quoted 19 lines · J.E.
Quoted 1 line
Quoted 1 line
What is the output of the ipp2p make install?
When i 'make install'
root@servidor:/usr/src/ipp2p-0.8.0# make install make: *** No hay ninguna regla para construir el objetivo `install'. Alto.This is the answer
make: *** There's no rules to build `install' object. Stop.
Logs don't give me any clue.
Any ideas?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 5 lines
"The network is the computer" _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 42 lines · J.E.
Hello list,
I'm newbie in this list. Well, i'm going crazy with ipp2p. Googling i find a mini-howto but i've got problems.
1) Download:
* iptables-dev (apt-get)
* kernel-headers-2.x.x (your kernel, "uname -r")
* src of your iptables (iptables -V and apt-get source)
* ipp2p-0.8.0.tar.gz (stable)
2) untar ipp2p and cd ipp2p
3) EditMakefile, if it's necesary:
*IPTABLES_SRC=/usr/src/iptables
* In my case, the headers are detected automaticaly.
4) make (WITHOUT ERRORS!!! ;) )
5) cp libipt_ipp2p.so/lib/iptables
6) cp ipt_ipp2p.ko/lib/modules/uname -r/kernel/net/ipv4/netfilter
7) depmod -A
8) insmod ipt_ipp2p.ko (or modprobe)
9) lsmod | grep ipp2p
10) iptables -m ipp2p --helproot@servidor:/usr/src/ipp2p-0.8.0# make make -C /lib/modules/2.6.15-28-386/build SUBDIRS=/usr/src/ipp2p-0.8.0 modules make[1]: se ingresa al directorio `/usr/src/linux-headers-2.6.15-28-386' CC [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.o Building modules, stage 2. MODPOST CC /usr/src/ipp2p-0.8.0/ipt_ipp2p.mod.o LD [M] /usr/src/ipp2p-0.8.0/ipt_ipp2p.ko make[1]: se sale del directorio `/usr/src/linux-headers-2.6.15-28-386' gcc -O3 -Wall -DIPTABLES_VERSION=\"\" -I/usr/src/iptables-1.3.3/include -fPIC -c libipt_ipp2p.c ld -shared -o libipt_ipp2p.so libipt_ipp2p.oSeems that all it's ok...
.
.
.
But ...
Quoted 8 lines
root@servidor:/usr/src/ipp2p-0.8.0# iptables -m ipp2p --help iptables: match `ipp2p' v (I'm v1.3.1).Only i get this line, iptables: match `ipp2p' v (I'm v1.3.1)
root@servidor:/usr/src/ipp2p-0.8.0# iptables -A FORWARD -m ipp2p --ipp2p -j DROP iptables: match `ipp2p' v (I'm v1.3.1).
ipp2p wasn't able to detect your current iptables versión number at compile time, that's why you see a 'v' character with nothing behind. Edit the ipp2p Makefile, and make shure that it finds your iptables versión number.
Do a make clean and rebuild.
Signature · 5 lines
Luciano _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc