Skip to contentSkip to conversation

Problem attaching htb class to a htb qdisc

LARTC Ruben Porras 2 participants 2 messages Mar 15, 2007 – Mar 30, 2007

lore
Share & tools
lore
#0 lore raw

I'm trying to build a QoS system that would divide the outgoing traffic into four categories, each one also subdivided into two more categories. For that I chose a htb root qdisc subdivided into four classes, each of these classes contains also a htb qdisc. Until these point everything goes well, but when I try to attach a new class to the leaf htb qdisc a problem with the sintaxis arises. Code follows:

tc qdisc add dev $DEV root handle 1: htb default 30

tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit

tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:20 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:30 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:40 htb rate ${UPLINK}kbit

tc qdisc add dev $DEV parent 1:10 handle 10: htb default 12 tc class add dev $DEV parent 10: classid 1:11 htb rate ${UPLINK}kbit
prio 1

RTNETLINK answers: Invalid argument

tc class add dev $DEV parent 10: classid 1:12 htb rate ${UPLINK}kbit
prio 2

RTNETLINK answers: Invalid argument

tc qdisc add dev $DEV parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev $DEV parent 1:12 handle 12: sfq perturb 10

...

If I attach the classes to 1: instead of 10: everything goes well, but I do not understand why I can't attach a class to 10:

Any help would be appreciated.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 9 lines · Ruben Porras

I'm trying to build a QoS system that would divide the outgoing traffic into four categories, each one also subdivided into two more categories. For that I chose a htb root qdisc subdivided into four classes, each of these classes contains also a htb qdisc. Until these point everything goes well, but when I try to attach a new class to the leaf htb qdisc a problem with the sintaxis arises. Code follows:

tc qdisc add dev $DEV root handle 1: htb default 30

Remember if $DEV is eth arp will go here.

Quoted 4 lines

tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit

Quoted 8 lines

tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:20 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:30 htb rate ${UPLINK}kbit
tc class add dev $DEV parent 1:1 classid 1:40 htb rate ${UPLINK}kbit

If you want UPLNK to be the max then children need UPLINK/4 - the parent will not cap it. Use ceil UPLINK aswell if you want each to be able to reach max when other classes are empty.

Quoted 2 lines

tc qdisc add dev $DEV parent 1:10 handle 10: htb default 12

This is strange, not sure if it's what you want - you don't need another htb here, though it is possible it's not normal. If you just want a child under 1:10 then do as you do below with parent 1:10, but remember parents don't cap rate of children.

Quoted 3 lines

tc class add dev $DEV parent 10: classid 1:11 htb rate ${UPLINK}kbit
prio 1

If you really want htb under htb then classid 10:11 may work.

Andy.

Quoted 17 lines

RTNETLINK answers: Invalid argument

tc class add dev $DEV parent 10: classid 1:12 htb rate ${UPLINK}kbit
prio 2

RTNETLINK answers: Invalid argument

tc qdisc add dev $DEV parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev $DEV parent 1:12 handle 12: sfq perturb 10

...

If I attach the classes to 1: instead of 10: everything goes well, but I do not understand why I can't attach a class to 10:

Quoted 7 lines

Any help would be appreciated.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc