mmc0: unrecognised SCR structure version 1
Hello,
using MMC/SD support on my PXA270 based board I get this error:
mmc0: unrecognised SCR structure version 1
when I insert a MINISD card.
I tried to find on the net some specifications for the SCR structure version 1 but I found nothing useful... someone has a similar problem or can suggest to me where I can find such specifications?
Thanks,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems [email protected] UNIX programming phone: +39 349 2432127
Quoted 4 lines · Rodolfo Giometti
Hello,
using MMC/SD support on my PXA270 based board I get this error:
Quoted 8 lines
mmc0: unrecognised SCR structure version 1
when I insert a MINISD card.
I tried to find on the net some specifications for the SCR structure version 1 but I found nothing useful... someone has a similar problem or can suggest to me where I can find such specifications?
To my knowledge, no such version exists. So either your card is broken or you have some transfer problem on your board. What's the name of this card and have you tried any others?
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Quoted 4 lines · Pierre Ossman
To my knowledge, no such version exists. So either your card is broken or you have some transfer problem on your board. What's the name of this card and have you tried any others?
I suppose the same... but this is the only cards who gives me such problems! What do you think it could be the problem? Maybe some PXA MMC special settings?
The card is a 512MB MiniSD by Viking InterWorks.
Thanks,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems [email protected] UNIX programming phone: +39 349 2432127
Quoted 4 lines · Rodolfo Giometti
I suppose the same... but this is the only cards who gives me such problems! What do you think it could be the problem? Maybe some PXA MMC special settings?
I'm afraid I have little experience with PXA. Perhaps you can find someone on the linux arm kernel mailing list with more insight?
Quoted 3 lines
The card is a 512MB MiniSD by Viking InterWorks.
Sounds like a fairly common card. Cards so broken that they give an incorrect scr version should be rare, so I would guess that there is some transfer problem with the PXA. I don't suppose you have any other linux based platforms to test the card in?
Rgds
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Quoted 3 lines · Pierre Ossman
I'm afraid I have little experience with PXA. Perhaps you can find someone on the linux arm kernel mailing list with more insight?
I already asked for.
Quoted 4 lines
Sounds like a fairly common card. Cards so broken that they give an incorrect scr version should be rare, so I would guess that there is some transfer problem with the PXA. I don't suppose you have any other linux based platforms to test the card in?
Unluckily not! :'(
Ciao,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems [email protected] UNIX programming phone: +39 349 2432127