Skip to contentSkip to conversation

mmc0: unrecognised SCR structure version 1

DISCUSSION Rodolfo Giometti 2 participants 5 messages May 30, 2007 – Jun 6, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

using MMC/SD support on my PXA270 based board I get this error:

mmc0: unrecognised SCR structure version 1

when I insert a MINISD card.

I tried to find on the net some specifications for the SCR structure version 1 but I found nothing useful... someone has a similar problem or can suggest to me where I can find such specifications?

Thanks,

Rodolfo

Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
#1 lore raw
Quoted 4 lines · Rodolfo Giometti

Hello,

using MMC/SD support on my PXA270 based board I get this error:

Quoted 8 lines

mmc0: unrecognised SCR structure version 1

when I insert a MINISD card.

I tried to find on the net some specifications for the SCR structure version 1 but I found nothing useful... someone has a similar problem or can suggest to me where I can find such specifications?

To my knowledge, no such version exists. So either your card is broken or you have some transfer problem on your board. What's the name of this card and have you tried any others?

Signature · 5 lines
     -- Pierre Ossman

  Linux kernel, MMC maintainer        http://www.kernel.org
  PulseAudio, core developer          http://pulseaudio.org
  rdesktop, core developer          http://www.rdesktop.org
#2 lore raw
Quoted 4 lines · Pierre Ossman

To my knowledge, no such version exists. So either your card is broken or you have some transfer problem on your board. What's the name of this card and have you tried any others?

I suppose the same... but this is the only cards who gives me such problems! What do you think it could be the problem? Maybe some PXA MMC special settings?

The card is a 512MB MiniSD by Viking InterWorks.

Thanks,

Rodolfo

Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
#3 lore raw
Quoted 4 lines · Rodolfo Giometti

I suppose the same... but this is the only cards who gives me such problems! What do you think it could be the problem? Maybe some PXA MMC special settings?

I'm afraid I have little experience with PXA. Perhaps you can find someone on the linux arm kernel mailing list with more insight?

Quoted 3 lines

The card is a 512MB MiniSD by Viking InterWorks.

Sounds like a fairly common card. Cards so broken that they give an incorrect scr version should be rare, so I would guess that there is some transfer problem with the PXA. I don't suppose you have any other linux based platforms to test the card in?

Rgds

Signature · 5 lines
     -- Pierre Ossman

  Linux kernel, MMC maintainer        http://www.kernel.org
  PulseAudio, core developer          http://pulseaudio.org
  rdesktop, core developer          http://www.rdesktop.org
#4 lore raw
Quoted 3 lines · Pierre Ossman

I'm afraid I have little experience with PXA. Perhaps you can find someone on the linux arm kernel mailing list with more insight?

I already asked for.

Quoted 4 lines

Sounds like a fairly common card. Cards so broken that they give an incorrect scr version should be rare, so I would guess that there is some transfer problem with the PXA. I don't suppose you have any other linux based platforms to test the card in?

Unluckily not! :'(

Ciao,

Rodolfo

Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127